Astonica 50108144 User manual

Brand: Astonica

Model: 50108144

Type: User manual

Read the instructions and precautions before use of this product

Please keep this instruction manual for future reference

Model No: 50108144

Due to ongoing product development

the actual product or products may vary from

the illustrations or photos shown within this manual.

Ready-To-Finish Junior Adirondack

Instruction Manual

NOTE: This product is intended for residential, non-commercial use.

For warranty information, please refer to the back page of

this instruction manual.

Made in China

Distributed by:

World Factory, Inc.

Westlake, TX 76262

Limited Warranty

World Factory, Inc. Products for Home Use

World Factory, Inc. (Seller) warrants to the original Buyer only, that each Astonica Product will be free

from defects in material and workmanship for a period of one (1) year from date of purchase.

SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED

WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH

ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE

SELLER WHICH HAVE BEEN MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY

FROM REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER

MAINTENANCE, NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This

warranty does not apply to damage, heat-induced coloration changes, scratching or alteration due to

normal use or weathering. To make a claim under this Limited Warranty, you must return the complete

product with proof of purchase, transportation prepaid, to any World Factory, Inc. authorized service

center. Call 1-888-422-7800 for the location of the nearest authorized service center.

Additional Limitations

THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED

TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1)

YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL

OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF

PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.

If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such

provision shall not affect any other provision herein, this Limited Warranty shall be construed as if

such invalid and/or unenforceable provision had never been contained herein.

This warranty gives you special legal rights, and you may also have other rights which vary from state

to state.

This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all

prior agreements, arrangements, or understandings between the parties relating to product warranty.

301111rev1

Figure 1

Figure 2

Carefully remove the contents from the package. If any parts are missing do not

attempt to use the product until they have been obtained and correctly installed.

ASSEMBLY INSTRUCTIONS

PARTS & HARDWARE LIST

PART # DESCRIPTION QUANTITY

Figure 3

Figure 4

1. (SEE FIGURE 1) Attach front legs (D) and back

supports (E) to the seat (A) using 6x50mm bolt

set (G).

CAUTION: Do not over tighten fasteners.

Parts Detail

3. (SEE FIGURE 3) Attach the armrests (C) to the

front leg (D) using the bolt set (G) and to the

back support (E) using the 6x50mm bolt (H).

2. (SEE FIGURE 2) Attach the chair back (B) to the

assembled seat (A) by screwing the screws (F)

into the top of the back support (E).

4. (SEE FIGURE 4) The chair is now ready for use.

A Seat 1

B Chair Back 1

C Armrests 2

D Front Leg 2

E Back Support 2

F 3.5x35mm Screw 4

G 6x50mm Bolt Set 8

H 6x50mm Bolt 2

Astonica 50108144 User manual

Astonica 50108144 User manual

Astonica 50108144 User manual

Related papers

Other documents