Astonica 50104258 User manual

Brand: Astonica

Model: 50104258

Type: User manual

Astonica 50104258 is a wagon wheel dining table. It is made of durable materials that are resistant to scratching, heat-induced coloration changes, and weathering, making it suitable for both indoor and outdoor use. The table is easy to assemble and disassemble, making it a great choice for people who need a portable table for camping, picnics, or other outdoor activities. It can also be used as a permanent dining table in a home or apartment. The table is sturdy and can support a significant amount of weight, making it suitable for use with heavy dishes and cookware.

Read the instructions and precautions before use of this product

Please keep this instruction manual for future reference

Made in China

Distributed by:

World Factory, Inc.

Westlake, TX 76262

Model No: 50104258

Wagon Wheel Dining Table

Instruction Manual

Due to ongoing product development

the actual product or products may vary from

the illustrations or photos shown within this manual.

NOTE: This product is intended for residential, non-commercial use.

291110rev1

Limited Warranty

World Factory, Inc. Products for Home Use

World Factory, Inc. (Seller) warrants to the original Buyer only, that each Astonica Product will be free

from defects in material and workmanship for a period of one (1) year from date of purchase.

SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED

WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH

ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE

SELLER WHICH HAVE BEEN MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY

FROM REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER

MAINTENANCE, NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This

warranty does not apply to damage, heat-induced coloration changes, scratching or alteration due to

normal use or weathering. To make a claim under this Limited Warranty, you must return the complete

product with proof of purchase, transportation prepaid, to any World Factory, Inc. authorized service

center. Call 1-888-422-7800 for the location of the nearest authorized service center.

Additional Limitations

THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED

TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1)

YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL

OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF

PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.

If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such

provision shall not affect any other provision herein, this Limited Warranty shall be construed as if

such invalid and/or unenforceable provision had never been contained herein.

This warranty gives you special legal rights, and you may also have other rights which vary from state

to state.

This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all

prior agreements, arrangements, or understandings between the parties relating to product warranty.

For warranty information, please refer to the back page of

this instruction manual.

PARTS & HARDWARE LIST

PART # DESCRIPTION QUANTITY

1. (SEE FIGURE 3) The bench is now ready for

use it.

Figure 2

Figure 3

Parts Detail

F G H

Carefully remove the contents from the package. If any parts are missing do not

attempt to use the product until they have been obtained and correctly installed.

A Wheel 2

B Table Plate 1

C Wheel Support 1

D Table Support 2

E Wheel Cap 2

F Screw M3.5X30mm 4

G Screw M3.5X35mm 2

H Screw M3.5X50mm 2

ASSEMBLY INSTRUCTIONS

1. (SEE FIGURE 2) Attach table plate (A) to wheel (B) using 4 screws (F), table plate on the top of

the table support using 2 screws (G). Attach the support (C) and table support (D) using

2 screws (H).

NOTE: Place a washer onto the bolt before inserting it through the holes.

Figure 1

CAUTION: Do not over tighten fasteners.

1. (SEE FIGURE 1) Secure wheel (A) to support

NOTE: Place a washer onto the bolt before

inserting it through the holes..

Astonica 50104258 User manual

Astonica 50104258 User manual

Astonica 50104258 User manual

Related papers

Other documents