AMX modero NXT-CV10/PB Operation/Reference Manual

Category
Software
Type
Operation/Reference Manual

This manual is also suitable for

Operation/Reference Guide
Software
TPDesign4
Touch Panel Design Program
(v2.10 or higher)
Last Revised: 8/21/2008
Software License and Warranty Agreement
• LICENSE GRANT. AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described in this
License. The AMX Software is licensed, not sold. This license does not grant Licensee the right to create derivative works of the
AMX Software. The AMX Software consists of generally available programming and development software, product documenta-
tion, sample applications, tools and utilities, and miscellaneous technical information. Please refer to the README.TXT file on
the compact disc or download for further information regarding the components of the AMX Software. The AMX Software is sub-
ject to restrictions on distribution described in this License Agreement. AMX Dealer, Distributor, VIP or other AMX authorized
entity shall not, and shall not permit any other person to, disclose, display, loan, publish, transfer (whether by sale, assignment,
exchange, gift, operation of law or otherwise), license, sublicense, copy, or otherwise disseminate the AMX Software. Licensee
may not reverse engineer, decompile, or disassemble the AMX Software.
• ACKNOWLEDGEMENT. You hereby acknowledge that you are an authorized AMX dealer, distributor, VIP or other AMX autho-
rized entity in good standing and have the right to enter into and be bound by the terms of this Agreement.
• INTELLECTUAL PROPERTY. The AMX Software is owned by AMX and is protected by United States copyright laws, patent
laws, international treaty provisions, and/or state of Texas trade secret laws. Licensee may make copies of the AMX Software
solely for backup or archival purposes. Licensee may not copy the written materials accompanying the AMX Software.
• TERMINATION. AMX RESERVES THE RIGHT, IN ITS SOLE DISCRETION, TO TERMINATE THIS LICENSE FOR ANY REA-
SON UPON WRITTEN NOTICE TO LICENSEE. In the event that AMX terminates this License, the Licensee shall return or
destroy all originals and copies of the AMX Software to AMX and certify in writing that all originals and copies have been
returned or destroyed.
• PRE-RELEASE CODE. Portions of the AMX Software may, from time to time, as identified in the AMX Software, include PRE-
RELEASE CODE and such code may not be at the level of performance, compatibility and functionality of the GA code. The
PRE-RELEASE CODE may not operate correctly and may be substantially modified prior to final release or certain features may
not be generally released. AMX is not obligated to make or support any PRE-RELEASE CODE. ALL PRE-RELEASE CODE IS
PROVIDED "AS IS" WITH NO WARRANTIES.
• LIMITED WARRANTY. AMX warrants that the AMX Software (other than pre-release code) will perform substantially in accor-
dance with the accompanying written materials for a period of ninety (90) days from the date of receipt. AMX DISCLAIMS ALL
OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO THE AMX SOFTWARE. THIS LIM-
ITED WARRANTY GIVES LICENSEE SPECIFIC LEGAL RIGHTS. Any supplements or updates to the AMX SOFTWARE,
including without limitation, any (if any) service packs or hot fixes provided to Licensee after the expiration of the ninety (90) day
Limited Warranty period are not covered by any warranty or condition, express, implied or statutory.
• LICENSEE REMEDIES. AMX's entire liability and Licensee's exclusive remedy shall be repair or replacement of the AMX Soft-
ware that does not meet AMX's Limited Warranty and which is returned to AMX in accordance with AMX's current return policy.
This Limited Warranty is void if failure of the AMX Software has resulted from accident, abuse, or misapplication. Any replace-
ment AMX Software will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer.
Outside the United States, these remedies may not available. NO LIABILITY FOR CONSEQUENTIAL DAMAGES. IN NO
EVENT SHALL AMX BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER
PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS AMX SOFTWARE, EVEN IF AMX HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES/COUNTRIES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITA-
TION MAY NOT APPLY TO LICENSEE.
• U.S. GOVERNMENT RESTRICTED RIGHTS. The AMX Software is provided with RESTRICTED RIGHTS. Use, duplication, or
disclosure by the Government is subject to restrictions as set forth in subparagraph ©(1)(ii) of The Rights in Technical Data and
Computer Software clause at DFARS 252.227-7013 or subparagraphs ©(1) and (2) of the Commercial Computer Software
Restricted Rights at 48 CFR 52.227-19, as applicable.
• SOFTWARE AND OTHER MATERIALS FROM AMX.COM MAY BE SUBJECT TO EXPORT CONTROL. The United States
Export Control laws prohibit the export of certain technical data and software to certain territories. No software from this Site may
be downloaded or exported (i) into (or to a national or resident of) Cuba, Iraq, Libya, North Korea, Iran, Syria, or any other coun-
try to which the United States has embargoed goods; or (ii) anyone on the United States Treasury Department's list of Specially
Designated Nationals or the U.S. Commerce Department's Table of Deny Orders. AMX does not authorize the downloading or
exporting of any software or technical data from this site to any jurisdiction prohibited by the United States Export Laws.
This Agreement replaces and supersedes all previous AMX Software License Agreements and is governed by
the laws of the State of Texas, and all disputes will be resolved in the courts in Collin County, Texas, USA. For
any questions concerning this Agreement, or to contact AMX for any reason, please write: AMX License and
Warranty Department, 3000 Research Drive, Richardson, TX 75082.
Table of Contents
i
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Table of Contents
TPDesign4 Program ............................................................................................1
Overview .................................................................................................................. 1
What's New in Version 2.10 ............................................................................................ 1
Supported Operating Systems ....................................................................................... 1
Supported Operating System Languages ...................................................................... 1
PC Requirements ............................................................................................................ 2
Supported Panel Types ................................................................................................... 2
Intercom Capabilities for Modero Panels ........................................................................ 3
Supported Screen Resolutions ........................................................................................ 3
TPDesign4 Work Area............................................................................................... 3
Toolbars.................................................................................................................... 5
Show/Hide Toolbars........................................................................................................ 5
Design View Windows .............................................................................................. 6
Using the Zoom Controls ................................................................................................ 7
Workspace Navigator ............................................................................................... 8
Properties Control Window ...................................................................................... 9
Properties Control Window - General Tab ...................................................................... 9
Properties Control Window - Programming Tab ............................................................. 9
Properties Control Window - States Tab......................................................................... 9
State Manager Window .......................................................................................... 10
Transfer Status Window.......................................................................................... 10
Button Preview Window ......................................................................................... 11
Button Preview Context Menu ...................................................................................... 11
Magnifier Window .................................................................................................. 12
Working With Dockable Windows .......................................................................... 12
Moving, Docking and Resizing Dockable Windows....................................................... 12
Toggling the Windows .................................................................................................. 12
Status Bar ............................................................................................................... 12
Default View.................................................................................................................. 13
Secondary View............................................................................................................. 13
Print Preview Window ............................................................................................ 14
Workspace Context Menu............................................................................................. 15
WebUpdate ............................................................................................................ 15
G4 PanelBuilder ...................................................................................................... 15
G4 PanelPreview..................................................................................................... 16
ii
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Table of Contents
TPDesign4 Project Files ....................................................................................17
Overview ................................................................................................................ 17
Inappropriate File Name Characters ............................................................................. 17
Creating a New Project........................................................................................... 17
Using The New Project Wizard ............................................................................... 18
System-Generated File Names................................................................................ 20
Edit Focus...................................................................................................................... 21
Setting Project Properties ...................................................................................... 22
Project Properties dialog - Project Information tab ................................................ 22
Applying Password Protection to Your Project File....................................................... 23
Project Properties dialog - Panel Setup Information tab ........................................ 24
Setting a Power Up Page .............................................................................................. 25
Setting Power Up Popup Pages .................................................................................... 25
Setting an Inactive Page Flip ......................................................................................... 26
Project Properties dialog - Sensors tab................................................................... 27
Project Properties dialog - IR Emitters and Receivers tab ...................................... 28
Working With R-4 Remote Controllers.................................................................... 29
Creating a TPD4 Project for R-4 Remote Controllers .................................................... 29
R-4 Remote Devices - Unsupported Button Types ........................................................ 30
Using Quick Input ................................................................................................... 30
Undo/Redo Support ...................................................................................................... 31
Using the Workspace Navigator ............................................................................. 31
Workspace Navigator - Pages tab........................................................................... 31
Opening pages/popup pages via the Workspace Navigator......................................... 32
Renaming Pages via the Workspace Navigator ............................................................. 32
Workspace Navigator - Edit Focus ................................................................................ 32
Workspace Navigator - Function Maps tab............................................................. 32
Cutting, Copying and Pasting ................................................................................. 33
Copying States to the Clipboard ................................................................................... 33
Pasting States from the Clipboard ................................................................................ 33
Cutting Objects ............................................................................................................. 34
Saving the Active Project as a Different Panel Type ............................................... 34
Working With Multiple Projects.............................................................................. 34
Opening Multiple Projects Simultaneously.................................................................... 34
Copying/Pasting Across Projects................................................................................... 34
Copying/Pasting Pages, Popup Pages and Buttons Across Projects ............................. 35
Project Migration (from previous versions of TPDesign4)....................................... 35
Converting TPD3 files to TPD4 ............................................................................... 35
Using the TPD Conversion Wizard................................................................................. 35
Table of Contents
iii
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Errors and Warnings Report dialog ............................................................................... 36
Working With Pages .........................................................................................37
Overview ................................................................................................................ 37
Creating a Page ...................................................................................................... 37
Page General Properties......................................................................................... 38
Creating a Page Flip...................................................................................................... 38
Drag & Drop To Set Page Flips ..................................................................................... 38
Page Flip Actions .......................................................................................................... 39
Page Programming Properties................................................................................ 39
Page State Properties............................................................................................. 40
Adding a Fill Color to a Page ........................................................................................ 41
Adding Text to a Page .................................................................................................. 41
Adding a Bitmap to a Page ........................................................................................... 41
Adding an Icon to a Page.............................................................................................. 42
Working with Transparent Backgrounds................................................................. 42
Supported Image File Types ......................................................................................... 43
Displaying a Video Source on a Page............................................................................ 43
Copying Pages........................................................................................................ 44
Pasting Pages ......................................................................................................... 44
Copying / Pasting a State From a Page......................................................................... 44
Opening pages/popup pages via the Workspace Navigator......................................... 44
Renaming a Page .................................................................................................... 44
Renaming Pages via the Workspace Navigator ............................................................. 44
Deleting Pages From a Project ............................................................................... 45
Exporting Pages as Image Files .............................................................................. 45
Printing Pages......................................................................................................... 46
Working With Popup Pages .............................................................................47
Overview ................................................................................................................ 47
Creating a Popup Page........................................................................................... 47
Using the Popup Draw Tool.................................................................................... 48
Drawing Assist Support for Popup Pages ............................................................... 49
Popup Page General Properties ............................................................................. 50
Popup Page Programming Properties .................................................................... 51
Popup Page State Properties ................................................................................. 51
Adding a Fill Color To a Popup Page ............................................................................ 53
Adding a Bitmap to a Popup Page................................................................................ 53
Adding an Icon to a Popup Page .................................................................................. 53
Adding Text to a Popup Page....................................................................................... 54
Displaying a Video Source on a Popup Page ................................................................ 54
iv
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Table of Contents
Copying Popup Pages............................................................................................. 54
Pasting Popup Pages .............................................................................................. 54
Copying / Pasting a State From a Popup Page ............................................................. 55
Popup Page Groups................................................................................................ 55
Show/Hide Popup Pages ........................................................................................ 55
Deleting Popup Pages From a Project .................................................................... 56
Printing Popup Pages ............................................................................................. 56
Working With Buttons ......................................................................................57
Overview ................................................................................................................ 57
Selection Tool................................................................................................................ 57
Setting Default Parameters for New Buttons ......................................................... 58
Drawing Tools Toolbar............................................................................................ 58
Creating New Buttons ............................................................................................ 59
Drawing a Button .......................................................................................................... 59
Using the Drawing Assist Features ................................................................................ 60
Alignment & Sizing Tool................................................................................................ 62
Generated Button Names ....................................................................................... 64
Setting General Button Properties ......................................................................... 65
Setting Button Programming Properties ................................................................ 66
Level Control Types....................................................................................................... 66
Setting State Properties ......................................................................................... 67
Editing Button Properties ....................................................................................... 68
Editing Multiple Selections............................................................................................ 68
Apply To All................................................................................................................... 68
General Buttons...................................................................................................... 69
Multi-State General Buttons ................................................................................... 69
Bargraph Buttons.................................................................................................... 69
Multi-State Bargraph Buttons ................................................................................. 69
Custom sliders on Multi-state Bargraph Buttons........................................................... 69
Formatting Codes (Bargraph and Multi-Bargraph buttons only) ................................... 70
Using Touch Maps for Multi-State Bargraphs Buttons................................................... 70
Joystick Buttons...................................................................................................... 71
Text Input Buttons .................................................................................................. 71
Input Mask Characters (Text Input button only) ............................................................ 71
Input Mask Ranges (Text Input button only).................................................................. 71
Input Mask Operators (Text Input button only)............................................................. 71
Input Mask Next Field Characters (Text Input button only)........................................... 72
Computer Control Buttons ..................................................................................... 72
TakeNote Buttons................................................................................................... 72
Table of Contents
v
TPDesign4 Touch Panel Design Software (v2.10 or higher)
List Box Buttons...................................................................................................... 72
Adding Text to a Button ......................................................................................... 72
Additional Foreign Language Support .......................................................................... 73
Pre-rendered graphics................................................................................................... 73
True Type Font Support ................................................................................................ 73
Changing Button Text Color ................................................................................... 73
Adding a Bitmap to a Button.................................................................................. 74
Adding an Icon to a Button..................................................................................... 74
Changing the Button Fill Color ............................................................................... 74
Border Styles .......................................................................................................... 75
Creating a Time Button........................................................................................... 75
Creating a Date Button........................................................................................... 75
Working With Touch Styles and Active Touch ........................................................ 76
Displaying a Video Source on a Button................................................................... 76
Copying/Pasting Buttons ........................................................................................ 76
Paste Controls dialog .................................................................................................... 77
Searching and Replacing Button Properties ........................................................... 77
Using Quick Input ................................................................................................... 78
Button Preview Window ......................................................................................... 79
External Controls (Pushbuttons/LEDs) .................................................................... 80
Setting Global General Properties for External Pushbuttons and/or LEDs ................... 81
Setting Global Programming Properties for External Pushbuttons and/or LEDs .......... 81
Setting Page-Specific General Properties for External Pushbuttons and/or LEDs......... 82
Setting Page-Specific Programming Properties for External Pushbuttons and/or LEDs 82
Copy/Convert External Controls Between Panels ......................................................... 82
List Box Buttons ...............................................................................................83
Overview ................................................................................................................ 83
G4 Devices That Support List Box Buttons ............................................................. 84
List Box Buttons: Managed Mode........................................................................... 85
List Box Buttons - Container.......................................................................................... 85
List Box Toolbar ............................................................................................................ 85
Creating List Box Buttons (Managed Mode) ........................................................... 86
Using the Drawing Tools Toolbar With List Box Buttons............................................... 87
Setting List Box Container Button Properties......................................................... 87
List Box Container Properties vs. Column Properties (Managed Mode)........................ 87
Setting General Properties: List Box Container Buttons ............................................... 88
Setting Programming Properties: List Box Container Buttons ...................................... 89
Setting State Properties: List Box Container Buttons ................................................... 89
List Box Buttons - Subordinate Buttons .................................................................. 90
vi
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Table of Contents
List Box Buttons - Columns............................................................................................ 90
Setting List Box Button Column Properties ............................................................ 91
Setting General Properties: List Box Button Columns ................................................... 91
Setting State Properties: List Box Button Columns ....................................................... 92
Adding Rows and Columns to a List Box (Managed Mode) .................................... 92
Adding Rows ................................................................................................................. 92
Adding Columns ............................................................................................................ 93
Deleting Rows and Columns from a List Box (Managed Mode) .............................. 93
Deleting Columns .......................................................................................................... 93
Deleting Rows ............................................................................................................... 93
Cutting, Copying and Pasting a List Box (Managed Mode)..................................... 93
Subordinate Button Placement ..................................................................................... 94
Subordinate Buttons - Drag and Drop Capability.......................................................... 94
List Box Buttons - Resizing Capability ........................................................................... 94
List Box Buttons - Navigation Buttons .................................................................... 95
Creating Navigation Buttons......................................................................................... 95
Navigation Buttons - Channel Code values ................................................................... 96
List Box Buttons: Unmanaged Mode ...................................................................... 96
Rules for Unmanaged List Box Buttons................................................................... 97
List Box Buttons - Z-Order............................................................................................. 97
Creating List Box Buttons (Unmanaged Mode) ............................................................. 97
Editable Button Properties of an Unmanaged List Box Container button .................... 98
Editable Button Properties of an Unmanaged List Box Subordinate button ................ 98
List Data Table ........................................................................................................ 99
Edit List Tables dialog ................................................................................................... 99
Creating a Static List Data Table ................................................................................. 100
List Data Table Column Types ..................................................................................... 101
Attaching a Static List Data Table to a List Box Button ............................................... 101
Editing Cell Data ......................................................................................................... 101
Changing the Port and Address Assignments for a Data List Table ............................ 102
Deleting a List Data Table ........................................................................................... 102
Working With Dynamic List Box Data ................................................................... 103
Dynamic List Box Data................................................................................................. 103
Creating a Dynamic List Data Table ............................................................................ 103
List Box Commands .............................................................................................. 103
Data List Commands .................................................................................................. 103
^LDN ...........................................................................................................................103
^LDA ...........................................................................................................................104
^LDR ...........................................................................................................................104
^LDC ...........................................................................................................................104
Table of Contents
vii
TPDesign4 Touch Panel Design Software (v2.10 or higher)
^LDD ...........................................................................................................................104
Data List Commands - Rules........................................................................................ 105
^LDT ...........................................................................................................................105
^LDL ............................................................................................................................ 105
Command Structure List View Commands ................................................................. 106
^LVO ...........................................................................................................................106
^LVL ............................................................................................................................ 106
^LVP ............................................................................................................................ 106
^LVS ............................................................................................................................ 107
^LVC ...........................................................................................................................107
^LVF ............................................................................................................................ 107
Attaching a Dynamic List Data Table to a List Box Button .......................................... 108
Example NetLinx Code with List Data......................................................................... 108
Working With Properties ................................................................................111
Properties Control Window .................................................................................. 111
Using the Apply To All option ..................................................................................... 112
Using the Prev and Next buttons ................................................................................ 112
General Properties................................................................................................ 113
Above Popups ............................................................................................................. 113
Animate Time Down .................................................................................................... 113
Animate Time Up ........................................................................................................ 113
Auto-Repeat ................................................................................................................ 113
Border Style ................................................................................................................ 113
Color Depth ................................................................................................................ 113
Column Display Order ................................................................................................. 113
Column Sort Order ...................................................................................................... 114
Compression ............................................................................................................... 114
Cursor Color ................................................................................................................ 114
Cursor Name ............................................................................................................... 114
Description .................................................................................................................. 114
Disabled ...................................................................................................................... 114
Display Type ................................................................................................................ 114
Group ..........................................................................................................................114
Height .........................................................................................................................114
Hidden ........................................................................................................................ 114
Hide Effect .................................................................................................................. 115
Input Mask .................................................................................................................. 115
Left .............................................................................................................................. 115
List Column ................................................................................................................. 115
List Column Padding ................................................................................................... 115
viii
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Table of Contents
List Display .................................................................................................................. 116
List Table Port ............................................................................................................. 116
List Table Address ....................................................................................................... 116
List Table Wrap ........................................................................................................... 116
List Filter Column ........................................................................................................ 116
List Managed ............................................................................................................... 116
List Offset Enabled ...................................................................................................... 117
List Preferred Row ....................................................................................................... 117
List Preferred Row Height ........................................................................................... 117
List Row .......................................................................................................................117
List Row Height ........................................................................................................... 117
List Row Padding ......................................................................................................... 117
List Selectable ............................................................................................................. 117
Lock Button Name ....................................................................................................... 118
Max Text Length ......................................................................................................... 118
Modal ..........................................................................................................................118
Name ...........................................................................................................................118
Page Flip ..................................................................................................................... 118
Password ..................................................................................................................... 118
Password Character ..................................................................................................... 118
Password Protection ................................................................................................... 118
Remote Host ............................................................................................................... 118
Remote Port ................................................................................................................ 118
Reset Pos. On Show: ................................................................................................... 118
Scale To Fit .................................................................................................................. 119
Show Effect ................................................................................................................. 119
Slider Color ................................................................................................................. 119
Slider Name ................................................................................................................. 119
State Count ................................................................................................................. 119
TakeNote Enabled ....................................................................................................... 119
TakeNote Host ............................................................................................................ 119
TakeNote Port ............................................................................................................. 119
Top .............................................................................................................................. 119
Touch Map ................................................................................................................... 119
Touch Style .................................................................................................................. 120
Type ............................................................................................................................ 120
Value Direction ............................................................................................................ 120
Width/Height .............................................................................................................. 120
Table of Contents
ix
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Programming Properties....................................................................................... 121
Address Code .............................................................................................................. 121
Address Port ............................................................................................................... 121
Channel Code .............................................................................................................. 121
Channel Port ............................................................................................................... 121
Command Output ....................................................................................................... 121
Command Port ............................................................................................................ 121
Feedback ..................................................................................................................... 121
Level Aux .................................................................................................................... 121
Level Code .................................................................................................................. 121
Level Control Repeat ................................................................................................... 121
Level Control Type ...................................................................................................... 121
Level Control Value ..................................................................................................... 121
Level Function ............................................................................................................. 121
Level Port .................................................................................................................... 121
Range Aux Inverted ..................................................................................................... 121
Range Drag Increment ................................................................................................ 121
Level Control Parameters............................................................................................ 122
Level Code .................................................................................................................. 122
Level Control Repeat ................................................................................................... 122
Level Control Value ..................................................................................................... 122
Level Port .................................................................................................................... 122
Range High .................................................................................................................. 122
Range Low .................................................................................................................. 122
Range Time Down ....................................................................................................... 122
Range Time Up ............................................................................................................ 122
Range High .................................................................................................................. 122
Range Inverted ............................................................................................................ 122
Range Low .................................................................................................................. 122
Range Time Down ....................................................................................................... 122
Range Time Up ............................................................................................................ 122
String Output .............................................................................................................. 122
String Output Port ...................................................................................................... 122
Level Functions............................................................................................................ 123
Display Only ................................................................................................................ 123
Active .......................................................................................................................... 123
Active Centering ......................................................................................................... 123
Drag ............................................................................................................................ 123
Drag Centering ........................................................................................................... 123
x
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Table of Contents
Address Codes...................................................................................................... 123
Basic Address Codes: Date Display ............................................................................. 123
Basic Address Codes: Time Display ............................................................................. 124
Channel Codes...................................................................................................... 124
Navigation Buttons - Channel Code values ................................................................. 124
Basic Channel Codes: Page Flip................................................................................... 125
NXP-PLV Reserved Channel Codes (1-7) ..................................................................... 125
Level Codes .......................................................................................................... 125
NXP-PLV Reserved Level Codes (1-11) ........................................................................ 125
State Properties.................................................................................................... 126
Bitmap .........................................................................................................................126
Bitmap Justification ..................................................................................................... 126
Bitmap X and Y Offsets ............................................................................................... 126
Border Color ................................................................................................................ 126
Border Name ............................................................................................................... 126
Chameleon Image ........................................................................................................ 127
Draw Order ................................................................................................................. 127
Fill Color ...................................................................................................................... 127
Font ............................................................................................................................. 127
Icon Justification ......................................................................................................... 127
Icon Slot ......................................................................................................................127
Icon X and Y Offsets .................................................................................................... 127
Marquee Direction ...................................................................................................... 128
Marquee Repeat .......................................................................................................... 128
Overall Opacity ........................................................................................................... 128
Scale Bitmap To Fit ..................................................................................................... 128
Sound ..........................................................................................................................128
Streaming Source ........................................................................................................ 128
Text ............................................................................................................................. 128
Text Color ................................................................................................................... 128
Text Effect ................................................................................................................... 129
Text Effect Color ......................................................................................................... 129
Text Justification ......................................................................................................... 129
Text X and Y Offsets ................................................................................................... 129
Video Cropping ........................................................................................................... 129
Video Fill .....................................................................................................................129
Video Pass-Thru ........................................................................................................... 129
Word Wrap .................................................................................................................. 129
All States option.......................................................................................................... 130
Workspace Navigator Context Menu .......................................................................... 130
Table of Contents
xi
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Working With The Property Painter...................................................................... 130
Property Painter dialog............................................................................................... 131
Saving a Properties Set ............................................................................................... 132
Working With States ......................................................................................133
Overview .............................................................................................................. 133
Setting State Properties ....................................................................................... 134
State Manager context menu...................................................................................... 134
Adding States To a Multi-State Button ................................................................. 135
Duplicating an Existing State on the Button ............................................................... 135
Adding States From the Clipboard ............................................................................. 135
Adding States Through Drag-and-Drop ...................................................................... 136
State Manager Drag-and-Drop Menu.......................................................................... 136
Removing States From A Multi-State Button ........................................................ 137
Deleting States............................................................................................................ 137
Cutting States To the Clipboard ................................................................................. 137
Changing the Order Of States .............................................................................. 137
Reordering States Through the Clipboard .................................................................. 137
Reordering States Through Drag-and-Drop ................................................................ 137
Choose Display State dialog ....................................................................................... 138
Replacing States On a Page, Popup Page or Button ............................................ 138
Replacing States From the Clipboard.......................................................................... 138
Replacing States Through Drag-and-Drop .................................................................. 138
Draw Order (Z-Order) ........................................................................................... 139
Changing the draw order for selected states.............................................................. 139
Working With Function Codes ........................................................................141
Overview .............................................................................................................. 141
Function Maps tab ...................................................................................................... 141
Display Function Codes............................................................................................... 142
Function Codes - Limitations ....................................................................................... 143
0-Setup Port................................................................................................................ 143
Power Assign ........................................................................................................ 143
The Power Assign dialog............................................................................................. 143
Using Power Assign: 1) Clear Channels ....................................................................... 144
Using Power Assign: 2) Assign Codes ......................................................................... 144
Begin Assignment At................................................................................................... 144
Ensure Contiguous Code Assignment ......................................................................... 145
Wrap Within Port ID.................................................................................................... 145
Colors and Palettes ........................................................................................147
Working With Colors ............................................................................................ 147
xii
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Table of Contents
Working With Multiple Color Palettes .................................................................. 148
Creating New Palette Entries...................................................................................... 148
Creating Custom Palettes............................................................................................ 149
Renaming Palettes....................................................................................................... 149
Changing the Active Palette........................................................................................ 149
Importing Palette Files ................................................................................................ 149
Exporting Palette Files ................................................................................................ 150
Copying Palettes ......................................................................................................... 150
Copying Palette Entries............................................................................................... 150
Using Custom Palettes to Enable Color Schemes in G4 PanelBuilder ......................... 150
Using the Grab and Paint Properties Tools........................................................... 151
Using the Property Painter ................................................................................... 152
Animations and Tweening ..............................................................................155
Using the Animation Wizard ................................................................................. 155
Animation Wizard - Select Type (Step 1 of 6).............................................................. 156
Animation Wizard - Create Sequence (Step 2 of 6) ..................................................... 156
Animation Wizard - Size & Position (Step 3 of 6)......................................................... 156
Animation Wizard - Assign Frames (Step 4 of 6) ......................................................... 157
Animation Wizard - Appearance (Step 5 of 6) ............................................................. 157
Animation Wizard - Finish (Step 6 of 6) ....................................................................... 157
Tweening .............................................................................................................. 158
Creating Color Transition Effects ................................................................................ 159
Creating Animated Bitmap Effects .............................................................................. 160
Creating Animated Text Effects .................................................................................. 161
Tweeners sub-menu .................................................................................................... 161
Chameleon Images................................................................................................ 162
Requirements for Chameleon Images.......................................................................... 162
Working With Chameleon Images ............................................................................... 163
Chameleon Images, Custom Palettes and G4 PanelBuilder......................................... 164
Working With Templates ................................................................................167
Importing Template (*.VAT or *.TPT) Files............................................................ 167
Working With the System Page Template ............................................................ 167
Copying/Pasting Entire System Pages into a Project .................................................. 168
Copying/Pasting System Page Elements into a Project page ...................................... 168
Working with System Page Keyboards and Keypads .................................................. 169
System Page Template Reference ............................................................................... 169
Exporting Your Project as a G4 PanelBuilder Template........................................ 171
Creating a New Project Using G4 PanelBuilder........................................................... 173
Importing G4 PanelBuilder Templates......................................................................... 174
Table of Contents
xiii
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Creating G4 PanelBuilder Templates .......................................................................... 174
Template Requirements .............................................................................................. 175
Required Template Elements ...................................................................................... 175
Optional Template Elements....................................................................................... 177
Element Specific Conventions ..................................................................................... 177
Rules for Navigating A Template ................................................................................ 178
Template Wide Conventions ....................................................................................... 178
Creating Navigation Elements .................................................................................... 178
Creating Placeholder Elements ................................................................................... 179
Placeholder Element Conventions .............................................................................. 181
Creating Preview Images ............................................................................................ 181
Alternate Screen Names for Template Elements ........................................................ 182
Element Specific Conventions ..................................................................................... 182
Navigation Element Conventions ............................................................................... 183
Sub-Navigation Element Conventions ...................................................................... 184
Splash Element Conventions ...................................................................................... 184
Device Element Conventions ...................................................................................... 185
Feature Element Conventions .................................................................................... 185
Sub-Feature Element Conventions ............................................................................. 185
Exporting Your Project as a VisualArchitect Template.......................................... 186
VA Templates - Navigations as Pages ......................................................................... 186
VA Templates - Logical Page Scroll Bar Elements ....................................................... 186
VA Templates - Logical Page Info Element.................................................................. 186
VA Templates - Logical Page Up and Down Elements ................................................ 187
VA Templates - List Box Page Up and Down Elements ............................................... 187
Working With the Resource Manager .............................................................189
Resource Manager dialog - Images tab................................................................. 190
Resource Manager dialog - Dynamic Images tab .................................................. 190
Resource Manager dialog - Slots tab .................................................................... 190
Resource Manager dialog - Sounds tab ................................................................ 191
Editing Image and Sound Files Using External Programs ..................................... 192
To edit image files:...................................................................................................... 192
To edit sound files:...................................................................................................... 192
Adding an External Editing Program for Image Files .................................................. 192
Adding an External Editing Program for Sound Files.................................................. 192
Changing the Default External Image or Sound Editor Program ................................ 193
Working With Images ........................................................................................... 193
Supported Image File Types ....................................................................................... 193
Importing Image Files To Your Project........................................................................ 194
Assigning Images to Slot Positions.............................................................................. 194
xiv
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Table of Contents
Working With Dynamic Images............................................................................. 195
Adding Dynamic Image Files To Your Project ............................................................. 195
Assigning Dynamic Images to Slot Positions ............................................................... 195
Preserve Dynamic Images (Refresh only at Panel Startup) .......................................... 195
Working With Dynamo Video ............................................................................... 196
Setting Up a DynaMo Video Image ............................................................................. 196
Motion JPEG Cameras and Servers that provide Motion JPEG streaming output ...... 198
Network Path Information........................................................................................... 198
Working With Trendnet IP Cameras ............................................................................ 200
Bitmaps vs. Icons .................................................................................................. 201
Working With Icons............................................................................................... 201
Working With Slot Assignments ........................................................................... 201
Assigning Image and Sound Files to Slot Positions ..................................................... 202
State Draw Order (Z-Order).................................................................................. 202
Working With Sound Files..................................................................................... 203
Importing Sound Files To Your Project........................................................................ 203
Assigning Sound Files to Slot Positions....................................................................... 203
Exporting Image and Sound Files From Your Project To a Specified Directory........... 204
Working With Video Fills ...................................................................................... 204
Streaming Video Fill .................................................................................................... 204
File Transfer Operations .................................................................................205
Working With Communications Configurations .................................................... 205
Saving and Recalling Communication Configurations.................................................. 205
Editing the Settings on an Existing Communication Configuration............................. 205
Connecting to a NetLinx Master ........................................................................... 205
Connecting to a NetLinx Master via TCP/IP ................................................................ 206
Connecting to a NetLinx Master via Serial Port........................................................... 206
Connecting to a NetLinx Master via Modem............................................................... 206
Secure NetLinx Connections ................................................................................. 207
Transferring Touch Panel Files to/from a NetLinx Master..................................... 207
Panel File Transfers via TCP/IP .................................................................................... 207
Panel File Transfers via Serial Port .............................................................................. 208
Panel File Transfers via Modem................................................................................... 210
Virtual NetLinx Master TCP/IP Transfers............................................................... 211
Configuring TPDesign4 for Virtual NetLinx Master TCP/IP Transfers .......................... 211
Powering Up and Connecting the Panel...................................................................... 212
Configuring the Touch Panel for Virtual NetLinx Master TCP/IP Transfers.................. 212
Transferring Files Using a Virtual NetLinx Master TCP/IP Connection .................. 212
Sending Files To the Panel .......................................................................................... 212
Table of Contents
xv
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Receiving Files From The Panel................................................................................... 213
Virtual NetLinx Master USB Transfers................................................................... 213
Configuring the Touch Panel for Virtual NetLinx Master USB Transfers...................... 213
Configuring TPDesign4 for Virtual NetLinx Master USB Transfers .............................. 213
Transferring Files Using a Virtual NetLinx Master USB Connection ...................... 214
Sending Files To the Panel .......................................................................................... 214
Receiving Files From The Panel................................................................................... 214
Sending a Project Without Opening the File............................................................... 214
Transfer Status Window........................................................................................ 214
Transfer Status Context Menu .................................................................................... 214
Program Preferences ......................................................................................217
Preferences Dialog ............................................................................................... 217
Preferences Dialog - Application tab .......................................................................... 217
Preferences Dialog - Appearance tab ......................................................................... 218
Preferences Dialog - Directories tab ........................................................................... 219
Preferences Dialog - Editor Selection tab ................................................................... 220
Customizing the Menus and Toolbars................................................................... 220
Adding or Removing Command Shortcuts from the Toolbars/Menus......................... 220
Customize dialog .................................................................................................. 220
Customize dialog - Commands tab.............................................................................. 220
Customize dialog - Toolbars tab ................................................................................. 221
Customize dialog - Tools tab....................................................................................... 221
Customize dialog - Keyboard tab................................................................................ 222
Customize dialog - Menu tab ...................................................................................... 222
Customize dialog - Options tab................................................................................... 223
Command Context Menu ............................................................................................ 223
Adding Buttons To Existing Toolbars.......................................................................... 223
Removing Buttons From Existing Toolbars ................................................................. 224
Creating a New Custom Toolbar................................................................................. 224
Renaming Custom Toolbars ........................................................................................ 224
Deleting Custom Toolbars........................................................................................... 224
Adding a Shortcut To an Application In the Tools Menu............................................. 224
Creating a New Custom Menu .................................................................................... 225
Adding Commands To Existing Menus........................................................................ 225
Associating an Icon With a New Command................................................................. 225
Removing Commands From Existing Menus ............................................................... 226
Hotkey Shortcuts .................................................................................................. 226
Help Keyboard dialog ................................................................................................. 226
Setting Custom Hotkeys.............................................................................................. 226
Visual Style Options.............................................................................................. 227
xvi
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Table of Contents
Appendix A: G4 Computer Control ................................................................229
System Requirements for G4CC ........................................................................... 229
Supported Operating Systems: ................................................................................... 229
System Requirements:................................................................................................. 229
Setting Up G4CC .................................................................................................. 229
1: TPD4 Touch Panel File............................................................................................. 229
2: Source Code............................................................................................................ 229
3: G4CC (Computer Control) Configuration: ............................................................... 230
Using configCC.exe to Configure G4CC ............................................................... 230
Setting Programming Properties: Computer Control Buttons .............................. 231
Running the G4CC Application ............................................................................. 232
Appendix B: G4 PanelBuilder .........................................................................233
Creating a New Project Using G4 PanelBuilder .................................................... 233
Importing G4 PanelBuilder Templates .................................................................. 233
Creating G4 PanelBuilder Templates .................................................................... 234
Template Requirements .............................................................................................. 234
Optional Template Elements ....................................................................................... 234
Rules for Navigating A Template ................................................................................ 235
Template Wide Conventions ....................................................................................... 236
Creating Navigation Elements .............................................................................. 236
Creating Placeholder Elements............................................................................. 238
Placeholder Element Conventions .............................................................................. 239
Creating Preview Images ...................................................................................... 239
Alternate Screen Names for Template Elements......................................................... 240
Element Specific Conventions............................................................................... 241
Navigation Element Conventions ............................................................................... 241
Sub-Navigation Element Conventions ...................................................................... 243
Splash Element Conventions ...................................................................................... 243
Device Element Conventions ...................................................................................... 243
Feature Element Conventions .................................................................................... 245
Sub-Feature Element Conventions ............................................................................. 245
Appendix C: TakeNote ...................................................................................247
Introduction .......................................................................................................... 247
USB Stick Specifications ............................................................................................. 247
Pre-Configuration Procedures............................................................................... 248
Updating AMX Hardware and Software...................................................................... 248
Developing a TPD4 project with G4CC and TakeNote Support .................................. 248
Modifying the Source Code on your Master ............................................................... 249
Configuring Computer Control.................................................................................... 250
Table of Contents
xvii
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Running the Computer Control Application................................................................ 251
Running the TakeNote Application ............................................................................. 251
xviii
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Table of Contents
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274

AMX modero NXT-CV10/PB Operation/Reference Manual

Category
Software
Type
Operation/Reference Manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI