This newsletter is a service of BCD Product Management. Volume 5, Issue 4
The information provided should be treated as confidential. Do not forward to any external party!
Please contact rudolf wingh
[email protected] for remarks and suggestions.
page 1 of 1
BCD ProductNews
Volume 5, Issue 4
14 March 2005
RC Agent Release 1.6 comes with SNMP support for OverView cPU67-DL
and provides enhanced SNMP support for projection systems of the
OverView D series.
Release note
RC Agent – Release 1.6
With Release 1.6 the RC AGENT provides support of the projection system OVERVIEW CPU67-DL.
Besides the standard features like switching on/off also dual lamp is supported.
This SNMP support now enables A
POLLO to provide device control also for the
O
VERVIEW CPU67-DL projection systems.
The SNMP support for the O
VERVIEW D series has been enhanced with the support of
O
VERVIEW DR+. For OVERVIEW D systems with SXGA+ resolution, RC AGENT Release 1.6 allows
to run the serial line communication at 115200 baud. Up to now, this baud rate was only
allowed in communication to a single projection system; in a chain it was limited to
9600 baud. Besides the higher baud rate, a single chain can contain up to 254 SXGA+
projection modules. With O
VERVIEW DG and OVERVIEW DR the recommended number of cubes
in a chain is still fixed to 16.
RC A
GENT Release 1.6 is available in versions for Windows 2000/XP and for Linux.
The Windows version will be on issue 5.1 of the TransForm A Suite CD for Windows systems.
The Linux version will be on issue 5.1 of the Manuals&Supplement CD for X-Terminal.
For a complete overview on the compatible combinations of the RC
AGENT versions please
refer to the updated RC A
GENT Compatibility Matrix on the PartnerZone.
Mathieu Massart
Product Manager