ESAB 3 phase
ESAB 3 phase is a semi-automatic welding machine designed for MIG/MAG welding of car body damage. It is customizable and available in various models for 220/380 V, 3-phase 50 Hz, 220 V, 3-phase 60 Hz 415/500 V, 3-phase 50 Hz, 440/550 V, 3-phase 60 Hz, 208-240 V as well as 440-460 V, single-phase 50/60 Hz. The default settings are for solid, spot and stitch welding. The device can be used with steel MIG wire with a diameter of 0.6-0.8 mm, and 1.0 mm aluminum wire. The recommended fuses and cable cross-sections correspond to the
ESAB 3 phase
ESAB 3 phase is a semi-automatic welding machine designed for MIG/MAG welding of car body damage. It is customizable and available in various models for 220/380 V, 3-phase 50 Hz, 220 V, 3-phase 60 Hz 415/500 V, 3-phase 50 Hz, 440/550 V, 3-phase 60 Hz, 208-240 V as well as 440-460 V, single-phase 50/60 Hz. The default settings are for solid, spot and stitch welding. The device can be used with steel MIG wire with a diameter of 0.6-0.8 mm, and 1.0 mm aluminum wire. The recommended fuses and cable cross-sections correspond to the
-
1
-
2
-
3
-
4
ESAB 3 phase User manual
- Type
- User manual
- This manual is also suitable for
ESAB 3 phase
ESAB 3 phase is a semi-automatic welding machine designed for MIG/MAG welding of car body damage. It is customizable and available in various models for 220/380 V, 3-phase 50 Hz, 220 V, 3-phase 60 Hz 415/500 V, 3-phase 50 Hz, 440/550 V, 3-phase 60 Hz, 208-240 V as well as 440-460 V, single-phase 50/60 Hz. The default settings are for solid, spot and stitch welding. The device can be used with steel MIG wire with a diameter of 0.6-0.8 mm, and 1.0 mm aluminum wire. The recommended fuses and cable cross-sections correspond to the
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- svenska: ESAB 3 phase Användarmanual
Related papers
-
ESAB Smashweld 180 User manual
-
-
-
-
-
-
-
-
-