ESAB Smashweld 180 User manual

Type
User manual

This manual is also suitable for

ESAB Smashweld 180, 3 phase is a self-cooled, handy semi-automatic welding machine of the constant voltage type provided with overload protection. A machine specially designed for MIG/MAG repair welding of damaged car bodies. The machine is as standard prepared for bead, spot and interval welding. It has permitted load duty cycles of:

  • 100% at 63A, 17V
  • 60% at 80A, 18V
  • 20% at 140A, 21V
  • 15% at 180A, 19V Smashweld 180 is intended for welding with MIG steel wire 0.6-0.8 mm and aluminium wire 1.0mm.

ESAB Smashweld 180, 3 phase is a self-cooled, handy semi-automatic welding machine of the constant voltage type provided with overload protection. A machine specially designed for MIG/MAG repair welding of damaged car bodies. The machine is as standard prepared for bead, spot and interval welding. It has permitted load duty cycles of:

  • 100% at 63A, 17V
  • 60% at 80A, 18V
  • 20% at 140A, 21V
  • 15% at 180A, 19V Smashweld 180 is intended for welding with MIG steel wire 0.6-0.8 mm and aluminium wire 1.0mm.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

ESAB Smashweld 180 User manual

Type
User manual
This manual is also suitable for

ESAB Smashweld 180, 3 phase is a self-cooled, handy semi-automatic welding machine of the constant voltage type provided with overload protection. A machine specially designed for MIG/MAG repair welding of damaged car bodies. The machine is as standard prepared for bead, spot and interval welding. It has permitted load duty cycles of:

  • 100% at 63A, 17V
  • 60% at 80A, 18V
  • 20% at 140A, 21V
  • 15% at 180A, 19V Smashweld 180 is intended for welding with MIG steel wire 0.6-0.8 mm and aluminium wire 1.0mm.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages