Sony STR-DA1500ES Operating instructions

Brand: Sony

Model: STR-DA1500ES

Category: Audio tuners

Type: Operating instructions

model name1[STR-DA1500ES]

[4-129-743-41(1)]

filename[D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB01COV_STR-DA1500ES-C.fm]

masterpage:Right

4-129-743-41(1)

FM Stereo

FM/AM Receiver

Operating Instructions

STR-DA1500ES

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB02REG_STR-DA1500ES-C.fm4-129-743-41(1)

masterpage: Left

STR-DA1500ES

4-129-743-41(1)

To reduce the risk of fire or electric

shock, do not expose this apparatus to

rain or moisture.

To reduce the risk of fire, do not cover the ventilation

opening of the apparatus with newspapers,

tablecloths, curtains, etc. Do not place the naked

flame sources such as lighted candles on the

apparatus.

Do not install the appliance in a confined space, such

as a bookcase or built-in cabinet.

To reduce the risk of fire or electric shock, do not

expose this apparatus to dripping or splashing, and

do not place objects filled with liquids, such as

vases, on the apparatus.

As the main plug is used to disconnect the unit from

the mains, connect the unit to an easily accessible

AC outlet. Should you notice an abnormality in the

unit, disconnect the main plug from the AC outlet

immediately.

Do not expose batteries or apparatus with battery-

installed to excessive heat such as sunshine, fire or

the like.

The unit is not disconnected from the mains as long

as it is connected to the AC outlet, even if the unit

itself has been turned off.

Excessive sound pressure from earphones and

headphones can cause hearing loss.

For customers in Europe

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the product or on its packaging

indicates that this product shall not be treated as

household waste. Instead it shall be handed over to

the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help

prevent potential negative consequences for the

environment and human health, which could

otherwise be caused by inappropriate waste

handling of this product. The recycling of materials

will help to conserve natural resources. For more

detailed information about recycling of this product,

please contact your local Civic Office, your

household waste disposal service or the shop where

you purchased the product.

WARNING

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB02REG_STR-DA1500ES-C.fm

masterpage: Right

STR-DA1500ES

4-129-743-41(1)

Disposal of waste batteries

(applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the battery or on the packaging

indicates that the battery provided with this product

shall not be treated as household waste.

On certain batteries this symbol might be used in

combination with a chemical symbol. The chemical

symbols for mercury (Hg) or lead (Pb) are added if

the battery contains more than 0.0005% mercury or

0.004% lead.

By ensuring these batteries are disposed of correctly,

you will help prevent potentially negative

consequences for the environment and human health

which could otherwise be caused by inappropriate

waste handling of the battery. The recycling of the

materials will help to conserve natural resources.

In case of products that for safety, performance or

data integrity reasons require a permanent

connection with an incorporated battery, this battery

should be replaced by qualified service staff only.

To ensure that the battery will be treated properly,

hand over the product at end-of-life to the applicable

collection point for the recycling of electrical and

electronic equipment.

For all other batteries, please view the section on

how to remove the battery from the product safely.

Hand the battery over to the applicable collection

point for the recycling of waste batteries.

For more detailed information about recycling of

this product or battery, please contact your local

Civic Office, your household waste disposal service

or the shop where you purchased the product.

Notice for customers: The following

information is only applicable to

equipment sold in countries applying

EU Directives.

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan Minato-ku Tokyo,

108-0075 Japan. The Authorized Representative for

EMC and product safety is Sony Deutschland

GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters

please refer to the addresses given in separate

service or guarantee documents.

About This Manual

• The instructions in this manual are for model

STR-DA1500ES. Check your model number by

looking at the lower right corner of the front panel.

In this manual, models of area code CEL is used

for illustration purposes unless stated otherwise.

Any difference in operation is clearly indicated in

the text, for example, “Models of area code CEK

only”.

• The instructions in this manual describe the

controls on the supplied remote. You can also use

the controls on the receiver if they have the same

or similar names as those on the remote.

About area codes

The area code of the receiver you purchased is

shown on the lower right portion of the rear panel

(see the illustration below).

Any differences in operation, according to the area

code, are clearly indicated in the text, for example,

“Models of area code AA only”.

Area code

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB01COV_STR-DA1500ES-CTOC.fm

masterpage: Left

STR-DA1500ES

4-129-743-41(1)

Table of Contents

Description and location of parts...................5

Getting Started

1: Installing the speakers .............................12

2: Connecting the speakers..........................12

3a: Connecting the audio components.........13

3b: Connecting the video components ........14

4: Connecting the antennas (aerials)............18

5: Preparing the receiver and the remote .....18

6: Selecting the speaker system ...................20

Playback

Enjoying sound/images from the component

connected to the receiver ........................21

Amplifier Operations

Navigating through menus...........................23

Adjusting the level (LEVEL menu).............25

Adjusting the equalizer (EQ menu) .............25

Settings for the tuner (TUNER menu).........26

Settings for the system (SYSTEM menu) ...26

Tuner Operations

Listening to FM/AM radio ..........................28

Presetting radio stations...............................29

Using the Radio Data System (RDS) ..........31

(Models of area code CEL, CEK only)

Other Operations

Enjoying the DIGITAL MEDIA PORT

(DMPORT) .............................................33

Changing the display ...................................35

Using the Sleep Timer .................................36

Recording using the receiver .......................36

Using multi-zone features............................37

Using the Remote

Changing button assignments......................40

Additional Information

Precautions.................................................. 41

Troubleshooting .......................................... 42

Specifications.............................................. 45

Index ........................................................... 47

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Right

STR-DA1500ES

4-129-743-41(1)

Description and location of parts

Front panel

About the indicators on the display

SP A

SP B

ZONE 2

RDS

MEMORY

MONO SLEEP

qk w;

continued

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Left

STR-DA1500ES

4-129-743-41(1)

Name Function

A ?/1

(on/standby)

Press to turn the receiver on

or off (page 19).

B SPEAKERS

(OFF/A/B/

A+B)

Switch to OFF, A, B, A+B of

the front speakers (page 20).

C TONE MODE Adjust the bass and treble

level of the speakers. Press

TONE MODE repeatedly to

select bass or treble, then turn

TONE +/– to adjust the level

(page 24).

TONE +/–

D TUNING

MODE

Press to operate a tuner

(FM/AM) (page 28).

TUNING +/–

E Remote

sensor

Receives signals from remote

commander.

F Display

window

The current status of the

selected component or a list

of selectable items appears

here (page 5).

G DISPLAY Press repeatedly to select

information displayed on the

display (page 35).

H MUTING Press to turn off the sound

temporarily.

Press MUTING again to

restore the sound (page 21).

I MASTER

VOLUME

Turn to adjust the volume

level of all speakers at the

same time (page 21).

J INPUT

SELECTOR

Turn to select the input

source to play back (page 21,

22, 35, 36, 37).

K DIMMER Press repeatedly to adjust the

brightness of the display.

L SLEEP Press to activate the sleep

timer function and the

duration which the receiver

turns off automatically (page

36).

M TONE ON/OFF Press to turn the bass and

treble on or off.

N MEMORY/

ENTER

Press to store a station or

enter the selection when

selecting the settings (page

19, 29).

O FM MODE Press to select the FM

monaural or stereo reception

(page 28).

P FM/AM Press to select FM or AM

station.

Q PHONES jack Connects to headphones

(page 42).

R SP A/SP B Lights up according to the

speaker system used (page

20). However, these

indicators do not light up if

the speaker output is turned

off or if headphones are

connected.

S SLEEP Lights up when the sleep

timer is activated.

T ZONE 2 Lights up when operation in

zone 2 is being enabled.

U Tuning

indicators

Lights up when the receiver

tunes in radio stations.

MEMORY Lights up when a memory

function, such as Preset

Memory (page 29), etc., is

activated.

RDS Lights up when a station that

provides RDS services is

tuned in.

Note

“RDS” appears for models of

area code CEL, CEK only.

MONO Monaural broadcast

ST Stereo broadcast

A preset station number

appears when the preset radio

station is selected.

Note

The preset station number

will change accordingly to

the preset station you select.

For details on presetting

radio station, see page 29.

Name Function

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Right

STR-DA1500ES

4-129-743-41(1)

Rear panel

A ANTENNA section

ANTENNA

jack

Connects to the

supplied FM wire

antenna (aerial)

(page 18).

ANTENNA

jack

Connects to the

supplied AM loop

antenna (aerial)

(page 18).

B DMPORT

DMPORT

jack

Connects to a

DIGITAL MEDIA

PORT adapter

(page 34).

C RS232C port

Used for

maintenance and

service.

D Control jacks for Sony equipment

and other external components

IR REMOTE

IN/OUT jacks

Connect an IR

repeater (page 37).

TRIGGER

OUT jack

Connects to an

interlock on/off of

the power supply of

other 12V

TRIGGER

compliant

components, or the

amplifier/receiver

of zone 2 (page 26).

E SPEAKERS section

Connects to the

speakers (page 12).

F AUDIO INPUT/OUTPUT section

AUDIO IN/

OUT jacks

Connects to a tape

deck or MD deck,

etc. (page 13).

White (L)

Red (R)

continued

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Left

STR-DA1500ES

4-129-743-41(1)

* You can watch the selected input image when you

connect the MONITOR OUT jack to a TV (page

15–17).

You can use the supplied RM-AAU056

Remote Commander to operate the receiver

and to control the Sony audio/video

components that the remote is assigned to

operate (page 40).

RM-AAU056

G VIDEO/AUDIO INPUT/OUTPUT

section

AUDIO IN/

OUT jacks

Connects to a VCR,

DVD player, etc.

(page 15–17).

VIDEO IN/

OUT* jacks

AUDIO OUT

jacks

VIDEO OUT

jack

Connects to the

component in zone

2 (page 38).

White (L)

Red (R)

Yellow

Remote commander

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Right

STR-DA1500ES

4-129-743-41(1)

Name Function

A TV ?/1

(on/standby)

Press TV ?/1 and TV (P) at

the same time to turn the TV

on or off.

AV ?/1

(on/standby)

Press to turn on or off the

Sony audio/video components

that the remote is assigned to

operate (page 40).

If you press ?/1 (B) at the

same time, it will turn off the

receiver and other Sony

components (SYSTEM

STANDBY).

Note

The function of the AV ?/1

switch changes automatically

each time you press the input

buttons (C).

B ?/1

(on/standby)

Press to turn the receiver on or

off.

If zone 2 is selected, only the

main receiver is turned on or

off with this button. To turn

off all components including

an amplifier in zone 2, press

?/1 and AV ?/1 (A) at the

same time (SYSTEM

STANDBY).

Saving the power in standby

mode.

When “RS232C” (page 27) is

set to “OFF”.

C Input buttons Press one of the buttons to

select the component you

want to use. When you press

any of the input buttons, the

receiver turns on. The buttons

are factory assigned to control

Sony components.

You can change the button

assignments following the

steps in “Changing button

assignments” on page 40.

D TONE ON/OFF Press to turn the bass and

treble on or off.

E DIMMER Press repeatedly to adjust the

brightness of the display.

F BD/DVD

Press to display the menu of

the DVD or Blu-ray disc on

the TV screen. Then, use V, v,

B, b and (qk) to perform

menu operations.

Name

Function

G DISC SKIP Press to skip a disc when

using a multi-disc changer.

H D.TUNING Press to enter direct tuning

mode.

I ENTER Press to enter the value after

selecting a channel, disc or

track using the numeric

buttons of the TV, VCR, CD

player, DVD player, DVD

recorder or satellite tuner.

MEMORY Press to store a station during

tuner operation.

J AMP MENU Press to display the menu of

the receiver. Then, use V, v,

B, b and (qk) to perform

menu operations.

K TOOLS/

OPTIONS

Press to display and select the

options of the DVD player or

Blu-ray disc player.

Press TOOLS/OPTIONS and

TV (P) at the same time to

display the options applicable

to the Sony TV.

L MUTING Press to turn off the sound

temporarily.

Press MUTING again to

restore the sound.

Press MUTING and TV (P)

at the same time to activate

the TV’s muting function.

M TV VOL

/–

Press TV VOL +/– and TV

(P) at the same time to adjust

the volume level of the TV.

MASTER

VOL +

/–

Press to adjust the volume

level of all speakers at the

same time.

N MENU/HOME Press to display the menu of

the VCR, DVD player,

satellite tuner or Blu-ray disc

player on the TV screen.

Press MENU/HOME and TV

(P) at the same time to

display the TV’s menu.

Then, use V, v, B, b and

(qk) to perform menu

operations.

continued

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Left

STR-DA1500ES

4-129-743-41(1)

O ./>

Press to skip a track of the CD

player, DVD player, DVD

recorder, MD deck, tape deck

or Blu-ray disc player.

REPLAY /

ADVANCE

Press to replay the previous

scene or fast forward the

current scene of the VCR,

DVD player or Blu-ray disc

player.

m/M

Press to

– search tracks in the forward/

reverse direction of the

DVD player.

– start fast forward/rewind of

the VCR, CD player, DVD

recorder, MD deck, tape

deck or Blu-ray disc player.

a)b)

Press to start playback of the

VCR, CD player, DVD

player, DVD recorder, MD

deck or Blu-ray disc player.

Press to pause playback or

recording of the VCR, CD

player, DVD player, DVD

recorder, MD deck, tape deck

or Blu-ray disc player. (Also

starts recording with

components in recording

standby.)

Press to stop playback of the

VCR, CD player, DVD

player, DVD recorder, MD

deck, tape deck or Blu-ray

disc player.

TV CH +/– Press TV CH +/– and TV (P)

at the same time to select

preset TV channels.

PRESET +/– Press to select

– preset stations.

– preset channels of the VCR

or satellite tuner.

TUNING +/– Press to scan a station.

FM MODE Press to select the FM

monaural or stereo reception.

P TV Press TV and the button with

orange printing at the same

time to enable TV operation.

Name

Function

Name Function

Q RETURN/

EXIT O

Press to

– return to the previous menu.

– exit the menu while the

menu or on-screen guide of

the DVD recorder, DVD

player, satellite tuner or Blu-

ray disc player is displayed

on the TV screen.

Press RETURN/EXIT O

and TV (P) at the same time

to return to the previous menu

or exit the TV’s menu while

the menu is displayed on the

TV screen.

V/v/B/b

After pressing BD/DVD

MENU (F), AMP MENU

(0), or MENU/HOME (N),

press V, v, B or b to select the

settings. Then, press to

enter the selection if you have

pressed BD/DVD MENU or

MENU/HOME previously.

Press also to enter the

selection of the receiver,

VCR, satellite tuner, CD

player, DVD player, DVD

recorder or Blu-ray disc

player.

S DISPLAY Press to select information

displayed on the TV screen of

the VCR, satellite tuner, CD

player, DVD player, DVD

recorder, MD deck or Blu-ray

disc player.

Press DISPLAY and TV (P)

at the same time to display

TV’s information on the TV

screen.

T -/-- Press to select the channel

entry mode, either one or two

digit of the VCR, satellite

tuner, etc.

Press -/-- and TV (P) at the

same time to select the

channel entry mode, either

one or two digits of the TV.

>10/

Press to select

– track numbers over 10 of the

VCR, satellite tuner, MD

deck or CD player.

– channel numbers of the

Digital CATV terminal.

CLEAR Press to clear a mistake when

you press the incorrect

numeric button.

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Right

STR-DA1500ES

4-129-743-41(1)

The number 5, MASTER VOL +, TV VOL +, and

H buttons have tactile dots. Use the tactile dots

as references when operating the receiver.

This button is also available for DIGITAL MEDIA

PORT adapter operation. For details on the

function of the button, refer to the operating

instructions supplied with the DIGITAL MEDIA

PORT adapter.

Notes

• Some functions explained in this section may not

work depending on the model.

• The above explanation is intended to serve as an

example only. Therefore, depending on the

component, the above operation may not be

possible or may operate differently than described.

• The CATEGORY +/– and CATEGORY MODE

buttons are not applicable for models of area code

CEL and CEK.

Name Function

U Numeric

buttons

(number 5

)

Press to

– preset/tune to preset

stations.

– select track numbers of the

CD player, DVD player,

DVD recorder, MD deck or

Blu-ray disc player. Press

0/10 to select track number

10.

– select channel numbers of

the VCR or satellite tuner.

Press the numeric buttons and

TV (P) at the same time to

select the TV channels.

V SLEEP Press to activate the Sleep

Timer function and the

duration which the receiver

turns off automatically.

W TV INPUT Press TV INPUT and TV (P)

at the same time to select the

input signal (TV input or

video input).

X ZONE ?/1 Press ZONE ?/1 to turn the

zone 2 on or off.

ZONE INPUT Press ZONE INPUT

repeatedly to select the input

source for zone 2.

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Left

STR-DA1500ES

4-129-743-41(1)

1: Installing the speakers

This receiver allows you to use a 2.0 channel

system.

Example of the speaker system

configuration

2: Connecting the

speakers

Before connecting the cords, be sure to

disconnect the AC power cord (mains lead).

If you have an additional front speaker system,

connect them to the SPEAKERS B terminals.

You can select the front speakers you want to use

with SPEAKERS (OFF/A/B/A+B) on the front

panel (page 20).

Getting Started

Right speakerLeft speaker

Left speakerRight speaker

SPEAKERS B

terminals*

A Speaker cords (not supplied)

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Right

STR-DA1500ES

4-129-743-41(1)

Getting Started

3a: Connecting the audio

components

The following illustration shows how to

connect a Super Audio CD player, CD player,

MD deck, tape deck or turntable.

Before connecting the cords, be sure to

disconnect the AC power cord (mains lead).

After connecting your audio component,

proceed to “3b: Connecting the video

components”(page 14).

Note

If your turntable has a ground (earth) wire, connect

it to the (U) SIGNAL GND terminal.

Connecting a Super Audio CD

player, CD player, MD deck,

Tape deck or Turntable

MD deck,

Tape deck

A Audio cord (not supplied)

Super Audio

CD player,

CD player

Turntable

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Left

STR-DA1500ES

4-129-743-41(1)

3b: Connecting the video

components

This section describes how to connect your

video components to this receiver. Before you

begin, refer to “Component to be connected”

below for the pages which describe how to

connect each component.

Before connecting the cords, be sure to

disconnect the AC power cord (mains lead).

After connecting all your components,

proceed to “4: Connecting the antennas

(aerials)” (page 18).

How to connect your

components

Component to be connected Page

Blu-ray disc player, DVD player 15

Satellite tuner, Set-top box 16

DVD recorder, VCR 17

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Right

STR-DA1500ES

4-129-743-41(1)

Getting Started

The following illustration shows how to

connect a Blu-ray disc player or a DVD player.

Connect audio and video cords according to

the jacks of your components.

If you connect a DVD player

• Be sure to change the factory setting of the

BD/DVD input button on the remote so that

you can use the button to control your DVD

player. For details, see “Changing button

assignments” (page 40).

• You can also rename the BD/DVD input so

that it can be displayed on the receiver’s

display. For details, see “Naming inputs”

(page 22).

Connecting a Blu-ray disc

player, DVD player

Blu-ray disc player, DVD player

A Audio cord (not supplied)

B Video cord (not supplied)

Audio signals Video signals

Video signals

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Left

STR-DA1500ES

4-129-743-41(1)

The following illustration shows how to

connect a satellite tuner or a Set-top box.

Connect audio and video cords according to

the jacks of your components.

Connecting a satellite tuner,

Set-top box

Satellite tuner, Set-top box

A Audio cord (not supplied)

B Video cord (not supplied)

Audio signals Video signals

Video signals

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Right

STR-DA1500ES

4-129-743-41(1)

Getting Started

The following illustration shows how to

connect a component which has analog jacks

such as a DVD recorder, VCR, etc.

Connect audio and video cords according to

the jacks of your components.

Notes

• Be sure to change the factory setting of the

VIDEO input button on the remote so that you can

use the button to control your DVD recorder. For

details, see “Changing button assignments” (page

40).

• You can also rename the VIDEO input so that it

can be displayed on the receiver’s display. For

details, see “Naming inputs” (page 22).

Connecting components with

analog video and audio jack

DVD recorder, VCR

Video signals Audio signals

A Audio cord (not supplied)

B Video cord (not supplied)

Video signals

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Left

STR-DA1500ES

4-129-743-41(1)

4: Connecting the

antennas (aerials)

Connect the supplied AM loop antenna

(aerial) and FM wire antenna (aerial).

Before connecting the antennas (aerials), be

sure to disconnect the AC power cord (mains

lead).

* The shape of the connector varies depending on

the area code of this receiver.

Notes

• To prevent noise pickup, keep the AM loop

antenna (aerial) away from the receiver and other

components.

• Be sure to fully extend the FM wire antenna

(aerial).

• After connecting the FM wire antenna (aerial),

keep it as horizontal as possible.

5: Preparing the receiver

and the remote

Connect the supplied AC power cord (mains

lead) to the AC INLET terminal on the

receiver, then connect the AC power cord

(mains lead) to a wall outlet.

Notes

• Before connecting the AC power cord (mains

lead), make sure that metallic wires of the speaker

cords are not touching each other between the

SPEAKERS terminals.

• Connect the AC power cord (mains lead) firmly.

A several space is left between the plug and the

rear panel even when the power cord (mains

lead) is inserted firmly. The cord is supposed

be connected this way. This is not malfunction.

FM wire antenna (aerial) (supplied)

AM loop antenna

(aerial) (supplied)

Connecting the AC power cord

(mains lead)

AC INLET terminal

To the wall outlet

AC power cord

(mains lead)

(supplied)

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Right

STR-DA1500ES

4-129-743-41(1)

Getting Started

Before using the receiver for the first time,

initialize the receiver by performing the

following procedure. This procedure can also

be used to return settings you have made to

their factory defaults.

Be sure to use the buttons on the receiver for

this operation.

1 Press ?/1 to turn off the

receiver.

2 Hold down ?/1 for 5 seconds.

“CLR ALL” and “PUSH ENT” appears

on the display alternately.

3 Press MEMORY/ENTER.

After “CLEARING” appears on the

display for a while, “CLEARED”

appears.

All the settings you have changed or

adjusted are reset to the initial settings.

Insert two R6 (size-AA) batteries in the

RM-AAU056 Remote Commander.

Observe the correct polarity when installing

batteries.

Notes

• Do not leave the remote in an extremely hot or

humid place.

• Do not use a new battery with old ones.

• Do not mix manganese batteries and other kinds of

batteries.

• Do not expose the remote sensor to direct sunlight

or lighting apparatuses. Doing so may cause a

malfunction.

• If you do not intend to use the remote for an

extended period of time, remove the batteries to

avoid possible damage from battery leakage and

corrosion.

• When you replace the batteries, the remote buttons

may be reset to their factory settings. If this

happens, reassign the buttons again (page 40).

• When the remote no longer operates the receiver,

replace all the batteries with new ones.

Performing initial setup

operations

MEMORY/ENTER

?/1

Inserting batteries into the

remote

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\CEL

VERSION\GB\4129743411\GB03CON_STR-DA1500ES-C.fm

masterpage: Left

STR-DA1500ES

4-129-743-41(1)

6: Selecting the speaker

system

You can select the front speakers you want to

drive.

Be sure to use the buttons on the receiver for

this operation.

Press SPEAKERS (OFF/A/B/A+B)

repeatedly to select the speaker

system you want to drive.

To turn off the speaker output

Press SPEAKERS (OFF/A/B/A+B)

repeatedly until the “SP A” and “SP B”

indicators on the display light off.

“ALL OFF” appears on the display for a while.

Note

You cannot switch the speaker system by pressing

SPEAKERS (OFF/A/B/A+B) when the headphones

are connected to the receiver.

To select Light up

The speakers connected to the

SPEAKERS A terminals

SP A

The speakers connected to the

SPEAKERS B terminals

SP B

The speakers connected to the

SPEAKERS A and B terminals

(parallel connection)

SP A

SP B

SPEAKERS (OFF/A/B/A+B)

Page is loading ...

Sony STR-DA1500ES Operating instructions

Brand: Sony

Model: STR-DA1500ES

Category: Audio tuners

Type: Operating instructions

Download PDF

report

Sony STR-DA1500ES Operating instructions

Sony STR-DA1500ES Operating instructions

Related papers

Other documents