Acer K10 Quick start guide

Type
Quick start guide

Acer K10: A multimedia powerhouse for your home entertainment needs. With its versatile connectivity options, you can effortlessly connect it to various devices, including computers, DVD players, and gaming consoles. Enjoy stunning visuals and immersive audio with its support for Full HD resolution and built-in speakers. Whether you're watching movies, playing games, or giving presentations, Acer K10 delivers a captivating experience.

Acer K10: A multimedia powerhouse for your home entertainment needs. With its versatile connectivity options, you can effortlessly connect it to various devices, including computers, DVD players, and gaming consoles. Enjoy stunning visuals and immersive audio with its support for Full HD resolution and built-in speakers. Whether you're watching movies, playing games, or giving presentations, Acer K10 delivers a captivating experience.

INSTALLATION
INTERFACE CONNECTOR
Note: Connector interface is subject to model’s specifications
Video Output
Y
Y
1
DVD player, Set-top Box
HDTV receiver
RBG
RBG
HDTV adapter
2
D-Sub
D-Sub
3
VGA, DVI
DeutschEnglish
Quick Start
X INSTALLATION
1. Composite video cable
2. VGA to component/HDTV adapter
3. VGA cable
Note: Connector interface is subject to model's specifications
Y INTERFACE CONNECTOR
Connecting to a Computer
1. Ensure the projector and your computer
are turned off.
2. Connect one end of the VGA cable to the
“VGA IN” connector on the projector;
connect the other end to the VGA
connector on the computer and tighten
the screws.
3. Connect one end of the AC adapter into
one end of the power cord.
4. Connect the other end of the AC adapter
into the DC IN connector on the
projector; connect the other end of the
power cord to an electrical outlet.
Powering On the Projector
1. Turn on the projector first and then the
computer.
2. Adjust the position and focus.
3. Run your presentation.
Powering Off the Projector
1. Press the power button twice.
2. Do not remove AC power cord from
outlet until the projector fan shut down.
Schnellstart
X INSTALLATION
1. Composite-Video-Kabel
2. VGA-zu-Component/HDTV-Adapter
3. VGA-Kabel
Hinweis: Die Anschlüsse hängen von den technischen Daten des
Modells ab
Y ANSCHLÜSSE
Anschluss an einen Computer
1. Stellen Sie sicher, dass der Projektor und
der Computer ausgeschaltet sind.
2. Verbinden Sie ein Ende des VGA-Kabel
mit dem „VGA IN”-Anschluss am
Projektor; verbinden Sie das andere Ende
mit dem VGA-Anschluss am Computer
und ziehen Sie die Schrauben fest.
3. Verbinden Sie ein Ende des Netzteils mit
einem Ende des Netzkabels.
4. Verbinden Sie das andere Ende des
Netzteils mit dem „DC IN“-Anschluss am
Projektor; verbinden Sie das andere Ende
des Netzkabels mit einer Netzsteckdose.
Einschalten des Projektors
1. Schalten Sie erst den Projektor und
anschließend den Computer ein.
2. Passen Sie Position und Fokus an.
3. Halten Sie die Präsentation.
Ausschalten des Projektors
1. Drücken Sie zweimal auf den
Stromschalter.
2. Trennen Sie das Netzkabel erst von der
Netzsteckdose, wenn das Gebläse des
Projektors ausgegangen ist.
  • Page 1 1
  • Page 2 2

Acer K10 Quick start guide

Type
Quick start guide

Acer K10: A multimedia powerhouse for your home entertainment needs. With its versatile connectivity options, you can effortlessly connect it to various devices, including computers, DVD players, and gaming consoles. Enjoy stunning visuals and immersive audio with its support for Full HD resolution and built-in speakers. Whether you're watching movies, playing games, or giving presentations, Acer K10 delivers a captivating experience.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages