Charging port/
Monitoring port
On Off/Noise
Reduction/
Reverberation
①Battery Indicator
②Wind-proof net
③Pause(Mute)
④On Off/Noise
Reduction/Reverberation
⑤Transmitter’s indicator
⑥Transmitter charging port/
Monitoring port
⑦Receiver's indicator
⑧Receiver's charging port
Step 1 Step1 Plug microphone receiver into the phone. After
the plug-in, the receiver’s indicator flashes red light.
Pause(Mute)
On Off/Noise
Reduction/Reverberation
Step 2 Press the On/Off button of the transmitter. The indicator
of transmitter turns green.
Step 3 Open the camera or live video apps to pick up sound.
To stop microphone from working, you can pull down the
Pause(Mute) button. The indicator of microphone flashes green
light.
By pulling up the Pause(Mute) button, the microphone will back
to work.
Double click the On/Off button to turn on the reverberation mode.
In reverberation mode, the transmitter’s indicator flickers green light.
Double click the button again to exit reverberation mode.
Reverberation
When recording video or on live, plug the earphone into the
monitoring port, you can hear the sound effect of the
microphone in real time.
Monitoring
Noise Reduction
The noise reduction mode has three grades: the third grade(the
strongest effect), the second grade, and the first grade(the
weakest effect). After the microphone is turned on, the third
grade is automatically activated.
Changing the grade of noise reduction
Clicking the transmitter On/Off button once will change the grade.
For example, with the transmitter turned on, click the transmitter
On/Off button once to switch from the third grade to the second
grade noise reduction. Click again to switch from the second grade
to the first grade; click again to turn off the noise reduction mode.
Note: Please separate 1 second between each click.
On Off/Noise
Reduction/Reverberation
When your phone is low battery, you can charge it through the
type-c /lightning port of the receiver.
For phones with type-c port, charge it with the type-c cable.
For phones with lightning port, charge it with the lightning cable.
Note, some models may not have this function. The actual product
shall govern.
Green light
Red and green
light flashing
Green light flashing
How to use Light
Light Off
Charging with
Type-C cable
Power On
Power Off
Pairing
Paired
Pause(Mute)
Low Battery
Charging Charging - red light
Fully Charged - light off
Red light flashing
Red and green
light flashing
Press the On/Off
button for 3 secs
Function
Noise
Reduction Press the On/Off
button
Third/Second/First grade:
Red light flashes 3/2/1 times
Turn off: Green light
flashes 1 time
Pull down the
Pause(Mute) button
Reverberation
Double click the
On/Off button
Flickering green light
Press the On/Off
button for 3 secs
Function
Power On
Power Off
Pairing
Paired
How to Use
Plug-in the device
Plug-off the device
Light
Red light
Light Off
Red light flashing
Red light
1.Transmitter
2.Receiver
3.Type-C Charging cable
4.Charging Box
5.User Manual
One side of
transmitter The other side of
transmitter