2. Winncare
  3. e-Station

Winncare e-Station User manual

  • I've reviewed the user manual for the e-Station and Luna devices. This document provides instructions on how to charge devices, including indicators for charging status and troubleshooting advice. I am ready to assist with any questions you have regarding these devices.
  • What does a green light on the charger indicate?
    What does a red light on the charger indicate?
    What should I do if there is no light indication on the charger?
    What should I do if the Luna is not charging, but the charger light is on?
User manual
e-Station
Manufacturer:
Winncare Nordic ApS
Taarnborgvej 12C
4220 Korsoer
Denmark
www.winncare.com
Distributor/service:
Date:
05.10.2021
Version:
UM-910-09000
Charging one Luna ( )
Charging two Luna simultaneously ( + )
Verify installation
User manual
e-Station
Manufacturer:
Winncare Nordic ApS
Taarnborgvej 12C
4220 Korsoer
Denmark
www.winncare.com
Distributor/service:
Date:
05.10.2021
Version:
UM-910-09000
To do:
Charger light identification:
Not charging:
Move the Luna into the e-
Station.
Green diode = Fully charged
Red diode = Charging
If the diode doesn’t change
from green to red, while
moving the Luna up and
down.
See Troubleshooting.
Troubleshooting
Description:
Error:
Solution:
No light indication on the
charger.
Charger is not connected to
the main supply.
Connect charger to the main
supply.
Luna not charging. Charger
light indication is on.
Conductor kit’s polarity is
not the same, for both the e-
Station and the cart.
See installation guide -
Conductor kit alignment.
Damaged/dirty conductor
wheels.
See annual service.
Annual service
/