2. Eurolux
  3. FS282

Eurolux FS282, FS264, FS278, FS279, FS280, FS281, FS283 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Eurolux FS282 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
LED Floodlights
FS259B/FS264: 1 x 10W Integrated LED 220 - 240V | FS265/FS278: 1 x 20W Integrated LED 220 - 240V
FS279: 1 x 30W Integrated LED 220 - 240V | FS280: 1 x 50W Integrated LED 220 - 240V
FS281: 1 x 100W Integrated LED 220 - 240V | FS282: 1 x 150W Integrated LED 220 - 240V
FS283: 1 x 200W Integrated LED 220 - 240V
ILLUSTRATIONS
FS259B / FS264 / FS265 / FS278 / FS279 / FS280 / FS281 / FS282 / FS283
PRODUCT CODE
Cape Town - 9 Racecourse Road, Milnerton, 7441
Johannesburg - 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065
www.eurolux.co.za
Please read instructions before commencing installation and retain for future reference.
ENVIRONMENTAL PROTECTION
Waste electrical & Electronic equipment regulations requires that any of our products
showing this marking must not be disposed of with other household or commercial
waste. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate any such products from other waste
types and recycle it responsibly at your local facilities.
2.8m
Min. 200mm
2.8m
Min. 200mm
FS259B / FS264 FS265 / FS278 FS279 FS280
FS281 FS282 FS283
Kindly Note: Loosen adjustable bolt, mounting
bracket can be adjusted, Transferred to the right
Angle in rotation after
Earth (green)
N (blue)
L (brown)
mounting bracket
mounting hole
adjustable bolt
mounting hole
• Fitting: Die cast Aluminium with clear tempered glass lens.
• Class: Class1. Requires earth connection.
• IP Rating: IP65
• Voltage: 220V - 240V ~ 50Hz
• Dimensions: FS259B/FS264 - (H)70mm x (W)98mm x (D)30mm
FS265/FS278 - (H)90mm x (W)118mm x (D)35mm
FS279 - (H)120mm x (W)148mm x (D)35mm
SPECIFICATIONS
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedo.
• Do not immerse the luminaire in water.
• No abrasive products, solvents, detergent may be used to clean this luminaire.
• Ensure that the luminaire does not come in contact with corrosive chemicals, etc.
• Coastal areas ensure that the luminaire is cleaned fortnightly.
attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced
bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.
To ensure that you get maximum longevity and maximum use out of your luminaire, please
observe the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
 mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletion
 ofinstallation,ensurethattheCerticateofComplianceisupdated.
• Before connecting this luminaire, ensure that voltage indicated on the rating label corresponds
with the mains voltage in your home.
• Whenchangingthelamp,ensurethatthepoweristurnedo.
• This luminaire is checked in full for conformity to the quality standards and safety requirements.
• The manufacturer / supplier is not responsible for any damage of properties and persons,
caused by the incorrect use or installation of the luminaire.
• Should you be unsure of how to install this luminaire correctly, please consult a professional
electrician or your supplier for assistance.
• Ensure all items/ components, threads and screws are tightly secured.
IMPORTANT:
• Tampering with this luminaire, IE. Using silicon sealers or incorrect cabling, will invalidate your
warranty.
• When the protection glass is damaged, it should be replaced immediately. The luminaire must
not be used without the protection glass.
• Please check whether the connection of the power cord is safe and reliable before installation.
• Always ensure that the mains supply voltage is correct.
• Ensure that you do not place the luminaire near any combustible materials and / or surfaces.
• Choking hazard: May contain small parts. Keep away from children.
• Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsofthis
product whilst it is connected to the electricity supply.
• Item may vary slightly from the picture on the carton.
• Coastalhumiditymayeectthelongevityoftheluminaire.
• Outdoor luminaires must be cleaned to prevent rust occurring.
• Use a copper grease on all screws or strings.
IMPORTANT SAFEGUARDS
INSTALLING YOUR FLOODLIGHT
• Ensurethatthemainsvoltageisturned/switchedobeforemountingtheluminaire.
• Thisluminaireisonlysuitableforxedmounting.
• Do not mount the luminire on the ceiling.
• This luminaire may not be used on a mast (pole).
• Refer to pictures for mounting of luminaire insure all connections are done with IP rated boxes.
FS280 - (H)150mm x (W)178mm x (D)35mm
FS281 - (H)215mm x (W)250mm x (D)35mm
FS282 - (H)310mm x (W)350mm x (D)45mm
FS283 - (H)340mm x (W)385mm x (D)45mm
• Weight: FS259B/FS264 - 0.14kg
FS265/FS278 - 0.23kg
FS279 - 0.38kg
FS280 - 0.6kg
FS281 - 1.26kg
FS282 - 2.47kg
FS283 - 3.13kg
• Lamp Type: FS259B/FS264 - 1 x 10W Integrated LED 220 - 240V
FS265/FS278 - 1 x 20W Integrated LED 220 - 240V
FS279 - 1 x 30W Integrated LED 220 - 240V
FS280 - 1 x 50W Integrated LED 220 - 240V
FS281 - 1 x 100W Integrated LED 220 - 240V
FS282 - 1 x 150W Integrated LED 220 - 240V
FS283 - 1 x 200W Integrated LED 220 - 240V
The light source of this luminaire is not replaceable. When the light source reaches its end of
life the whole luminaire should be replaced, or the light source should only be replaced by
the manufacturer.
• Maximum Projected Area: FS259B/FS264 - 0.0034m2
FS265/FS278 - 0.006072m2
FS279 - 0,0114m2
FS280 - 0.019m2
FS281 - 0.036m2
FS282 - 0.07353m2
FS283 - 0.086m2
• Commercial / domestic use
• Suitable for outdoor use when used correctly.
•Thisxturemustbemountedinthehorizontalposition.
/