Hi Sharp 4IN1-D060AA User manual

Brand
Hi Sharp
Model
4IN1-D060AA
Category
Security cameras
Type
User manual

This manual is also suitable for

HD Analogue Camera_ Manual
2
Contents
SAFETY PRECAUTIONS .............................................................. 3
Specification .................................................................................. 4
Product contents .......................................................................... 5
Product overview ......................................................................... 6
Dimension....................................................................................... 7
COC (control over coaxial) function ...................................... 8
OSD Menu ...................................................................................... 9
Connection .................................................................................. 14
3
SAFETY PRECAUTIONS
Please read before using
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of insulated dangerous
Voltage within the product’s enclosure that may be sufficient magnitude to
constitute risk of electrical shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operation and maintenance (servicing)
instructions in the literature accompanying the appliance.
1. Please read the service manual in details before using.
2. Don't try to disassemble the chassis or the part easily, in case that touch the
power by mistake, is shocked by electricity the danger or caused inside parts
to be damaged.
3. Do not attempt to service this unit yourself unless you are authorized to do
so. Opening cover may exposure you to dangerous voltage or other hazards.
Refer all servicing to qualified personnel only.
4. When being regular, please lock the parts firmly first to prevent the machine
damage.
5. Please connect correctly in accordance with the regulation, prevent the
machine from using, or striking improperly.
6. Please don't use any organic solution or the corrosively sanitizer to insert
and wipe away the chassis outside. While inserting and wiping away, please
turn off the power, and use the clean cloth is stained with letting a small
amount of branch water, insert and wipe away appearance.
7. The contents of this manual are subject to change without notice.
4
Specification
Image unit
1/2.9” SONY CMOS : 2.0 Mega
Resolution
1920(H) x 1080(V)
Video Output
AHD / CVI / TVI / CVBS
Synchronization
Internal
Scanning System
2:1 interlace
S/N Ratio
More than 60 dB ( AGC OFF)
Electronic Shutter
Auto 1/60 (1/50) ~ 1/50,000 sec
Min. Illumination
0.01Lux ( F1.4 , AGC ON)
Lens Type
Vari-focus Lens: 2.8 mm~12 mm
Coxial Cable Transmition
Distance(3C/5C)
300 M / 500 M
Twisted Cable Transmition
Distance (Cat5e standard)
200 M
Power Source
DC 12 V ± 10% / 1 A
Adaptor
Optional
Operating Temperature
-10 ℃ ~ 50 ℃ (14 ℉ ~ 122 ℉ )
Storage Temperature
-20 ℃ ~ 60 ℃ (-4 ℉ ~ 140 ℉)
Please use suitable adapters DC12V ± 10%≧1A . Otherwise, this product will be damaged.
5
Product contents
Item
Figure
Trapping Screws × 3
Anchor × 3
Wrench × 1
6
Product overview
Item
Description
①
Camera
②
OSD button
③
BNC cable
④
Power cable (DC 12 V± 10%)
7
Dimension
Unit : mm
8
COC (control over coaxial) function
① Enable the channel which you want to configure, and choose COC
(control over coaxial) function under PTZ Protocol page.
② Click the right button of the mouse, choose PTZ Control.
③ Click ” Iris + “ to open OSD menu.
※Notice : When you are inside the camera OSD, if there is suddenly power
shortage, the setting will not be saved in the memory. You must exit the OSD
or wait the OSD disappears to validate the modified setting in the memory.
Description
Open the OSD menu of camera / Enter
Adjustment parameter options
Direction button, in order to choose the
item that you want to config.
9
OSD Menu
Notice : ”(xxx)”means (default value)
LENS
MANUAL (Default)
DC
MODE
OUTDOOR
(DEFAULT)
MIN SHU
1/30
MAX SHU
(1/2000),1/5000,1/10000,1/50000,
1/60,FLK,1/240,1/480,1/1000
RETURN
INDOOR
IRIS SPEED
0~15(8)
RETURN
RET,SAVE&END
EXPOSURE
SHUTTER
1/30,1/60,FLK,1/240,1/480,1/1000,1/2000,1/5000,1/10000,1/50
000,X2,X4,X6,X8,X10,X15,X20,X25,X30,AUTO (AUTO)
AGC
0-15 (13)
SENS-UP
OFF
AUTO
(Default)
SENS-UP
X2,X4,X6,X8,X10,X15,X20,X25,
X30,(X2)
RETURN
RET,SAVE & END
BRIGHTNESS
1-100 (50)
D-WDR
OFF
ON
LEVEL
0-8 (5)
RETURN
RET,SAVE & END
AUTO (Default)
DEFOG
OFF (Default)
AUTO
POS/SIZE
POSITION, SIZE,RET,AGAIN
GRADATION
0-2 (0)
DEFAULT
RETURN
RET,SAVE & END
RETURN
RET,SAVE & END
BACK
LIGHT
OFF (Default)
BLC
LEVEL
MIDDLE、HIGH、LOW (MIDDLE)
AREA
POSITION, SIZE,RET,AGAIN
DEFAULT
RETURN
RET,SAVE & END
HSBLC
SELECT
AREA1,AREA2,AREA3,AREA4 (AREA1)
DISPLAY
OFF
ON (Default)
POSITION, SIZE,RET,AGAIN
10
BLACK MASK
ON, OFF (ON)
LEVEL
0-100 (20)
MODE
ALL DAY
NIGHT
(Default)
AGC
LEVEL
0-255 (48)
RETURN
RET,SAVE & END
DEFAULT
RETURN
RET,SAVE & END
WHITE BAL
ATW (Default)
AWC →SET
INDOOR
OUTDOOR
MANUAL
BLUE
0-100 (63)
RED
0-100 (43)
RETURN
RET,SAVE & END
AWB
DAY＆
NIGHT
AUTO
D →N(AGC)
1-255 (168)
D →N(DELAY)
0-60 (5)
N →D(AGC)
1-255 (80)
N →D(DELAY)
0-60 (5)
RETURN
RET,SAVE & END
COLOR
B/W
BURST
ON, OFF (OFF)
IR SMART
OFF(Default)
ON
LEVEL
0-15 (3)
AREA
POSITION,
SIZE,RET,AGAIN
RETURN
RET,SAVE & END
RETURN
RET,SAVE & END
EXT (Default)
D →N(DELAY)
3-60 (3)
N →D(DELAY)
3-60 (3)
RETURN
RET,SAVE & END
NR
2DNR
OFF,MIDDLE、HIGH、LOW (LOW)
3DNR
OFF,MIDDLE、HIGH、LOW (LOW)
RETURN
RET,SAVE & END
SPECIAL
CAM TITLE
OFF (Default)
ON
0123456789
ABCDEFGHIJK
11
LMNOPQRSTUV
WXYZ▲→←↑↓( )
¯-_■/=&:~,.
←→ CLR POS END
D-EFFECT
FREEZE
OFF,ON (OFF)
MIRROR
OFF,MIRROR,V-FLIP,ROTATE (OFF)
NEG.IMAGE
OFF,ON (OFF)
RETURN
RET,SAVE & END
MOTION
OFF (Default)
ON
SELECT
AREA1,AREA2,AREA3,AREA4
(AREA1)
DISPLAY
ON
(Default)
POSITION,
SIZE,RET,AGAIN
OFF
SENSITIVITY
0-100 (64)
COLOR
GREEN,BLUE,WHITE,RED
(GREEN)
TRANS
0.00/1.00/0.75/0.25 (1.00)
ALARM
VIEW
TYPE
ALL,OFF, BLOCK,
OUTLINE (ALL)
OSD
VIEW
OFF,ON (ON)
ALARM
OUT
OFF,ON (ON)
TIME
1-15 (3)
RETURN
RET,SAVE & END
DEFAULT
RETURN
RET,SAVE & END
PRIVACY
OFF (Default)
ON
SELECT
AREA1,AREA2,AREA3,AREA4
(AREA1)
DISPLAY
OFF
MOSAIC
POSITION,
SIZE,RET,AGAIN
INV.
POSITION,
SIZE,RET,AGAIN
COLOR
(Default)
POSITION,
SIZE,RET,AGAIN
COLOR
WHITE,USER,BLACK,RED,
12
BLUE,YELLOW,GREEN,CYAN
(WHITE)
TRANS
1.00/0.25/0.50/0.75 (1.00)
DEFAULT
RETURN
RET,SAVE & END
LANGUAGE
HEB,ARB,ENG,CHN1,CHN2,GER,FRA,ITA,SPA,POL,RUS,POR,
NED,TUR,KOR, JPN (ENG)
DEFECT
LIVE DPC
OFF
ON (Default)
AGC
LEVEL
0-255 (70)
LEVEL
0-100 (50)
RETURN
RET,SAVE & END
WHITE DPC
OFF
ON (Default)
POS/SIZE
POSITION,
SIZE,RET,AGAIN
START
CLOSE THE IRIS
THEN
PRESS ENTER
DPC VIEW
ON, OFF (OFF)
LEVEL
0-60 (15)
AGC
0-14 (14)
SENS-UP
X2,X4,X6,X8,X10,
X15,X20,X25,X30
(X8)
RETURN
RET,SAVE & END
BLACK DPC
OFF (Default)
ON
POS/SIZE
POSITION,
SIZE,RET,AGAIN
START
PRESS ENTER
DPC VIEW
ON, OFF (OFF)
LEVEL
0-100 (100)
RETURN
RET,SAVE & END
RETURN
RET,SAVE & END
RS485
CAM ID
0-255 (0)
ID DISPLAY
ON, OFF (OFF)
BAUDRATE
2400,4800,9600,19200,38400 (38400)
RETURN
RET,SAVE & END
13
RETURN
RET,SAVE & END
ADJUST
SHARPNESS
OFF
AUTO
(Default)
LEVEL
0-10 (6)
START AGC
0~255 (70)
END AGC
0~255 (200)
RETURN
RET,SAVE & END
MONITOR
LCD (Default)
GAMMA
USER ,0.45,0.50,0.55,0.60,0.65,
0.70,0.75,0.80,0.85,0.90,0.95,
1.00 (USER)
BLUE GAIN
0~100 (50)
RED GAIN
0~100 (50)
RETURN
RET,SAVE & END
CRT
BLUE GAIN
0~100 (50)
RED GAIN
0~100 (50)
RETURN
RET,SAVE & END
LSD
ON, OFF (ON)
VIDEO. OUT
NTSC,PAL
RETURN
RET,SAVE & END
EXIT
SAVE & END,NOT SAVE,RESET（SAVE & END）
14
Connection
Step 1. Insert the wrench and turn anti-clockwise to unlock.
Step 2. Remove the cover.
Step 3. Turn clockwise to lock.
15
Step 4. Make sure the connection is tightened.
Step 5. Cover it back and turn clockwise to lock.
Step 6. Connect BNC cable and power cable.
※NOTICE : If necessary, please install 3 anchors before the
third step.
85-AAD060-A502G-A
BNC cable
Power cable
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Hi Sharp 4IN1-D060AA User manual

Brand
Hi Sharp
Model
4IN1-D060AA
Category
Security cameras
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents