2. Home
  3. Do-It-Yourself tools
  4. Power tools
  5. Power sanders
  6. Grizzly
  7. H6070

Grizzly H6070 Owner's manual

  • I have reviewed the datasheet for the Grizzly H6070 Belt/Disc Combo Sander. It provides detailed specifications on the machine's dimensions, electrical requirements, motor, and sanding capabilities, including the belt and disc sizes, speeds, and table adjustments. I'm ready to answer your queries about this machine.
  • What is the power requirement for this sander?
    What is the sanding belt speed?
    What is the disc diameter?
    What type of switch does it have?
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2
Model H6070
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL H6070 1" X 30" BELT/5" DISC COMBO SANDER
Product Dimensions:
Weight................................................................................................................................................................ 19 lbs.
Width (side-to-side) x Depth (front-to-back) x Height...............................................................14 x 10-3/4 x 14-1/2 in.
Footprint (Length x Width)........................................................................................................................... N/A x N/A
Shipping Dimensions:
Type..................................................................................................................................................... Cardboard Box
Content........................................................................................................................................................... Machine
Weight................................................................................................................................................................ 21 lbs.
Length x Width x Height....................................................................................................................... 13 x 17 x 12 in.
Electrical:
Power Requirement........................................................................................................... 110V, Single-Phase, 60 Hz
Prewired Voltage.................................................................................................................................................. 110V
Full-Load Current Rating....................................................................................................................................... 2.5A
Minimum Circuit Size..............................................................................................................................................15A
Switch Type.................................................................................................. Toggle Safety Switch w/Removable Key
Motors:
Main
Horsepower............................................................................................................................................. 1/3 HP
Phase............................................................................................................................................ Single-Phase
Amps........................................................................................................................................................... 2.5A
Speed................................................................................................................................................ 3450 RPM
Type................................................................................................................. TEFC Capacitor-Start Induction
Power Transfer ............................................................................................................................... Direct Drive
Bearings..................................................................................................... Shielded & Permanently Lubricated
Centrifugal Switch/Contacts Type................................................................................................................ N/A
Main Specifications:
Belt Sander Info
Sanding Belt Width...................................................................................................................................... 1 in.
Sanding Belt Length.................................................................................................................................. 30 in.
Sanding Belt Speed........................................................................................................................... 3150 FPM
Table Length..........................................................................................................................................5-1/8 in.
Table Width........................................................................................................................................... 5-1/8 in.
Table Tilt............................................................................................................................ Left 0, Right 45 deg.
Table-to-Floor Height................................................................................................................................... 7 in.
Platen Type................................................................................................................................................ Steel
Platen Length...............................................................................................................................................3 in.
Platen Width................................................................................................................................................ 1 in.
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2
Model H6070
Disc Sander Info
Disc Diameter.............................................................................................................................................. 5 in.
Disc Speed........................................................................................................................................ 3450 RPM
Disc Sandpaper Backing Type.................................................................................................................... PSA
Table Length................................................................................................................................................ 4 in.
Table Width......................................................................................................................................... 7-5/16 in.
Table Thickness......................................................................................................................................9/16 in.
Table Tilt............................................................................................................................ Left 0, Right 45 deg.
Table-to-Floor Height.............................................................................................................................4-1/4 in.
Construction Materials
Base............................................................................................................................................ Punched Steel
Table............................................................................................................................. Ground Cast Aluminum
Miter Gauge............................................................................................................................................. Plastic
Paint Type/Finish...................................................................................................................................... Epoxy
Other Related Info
Miter Gauge Slot Width........................................................................................................................... 12 mm
Miter Gauge Slot Height............................................................................................................................ 3 mm
Number of Dust Ports....................................................................................................................................... 2
Dust Port Size.......................................................................................................................... 1-3/4,1-13/16 in.
Features:
Dual Dust Ports
Safety Guards
Adjustable Platen
Universal Positioning Lock Levers
Removable Safety Key
Manual Belt Tracking Adjustment
Rubber Foot Mounting
Takes Standard 1" X 30" Belts and 5" Discs
Machined Aluminum Tables
/