2. Dakota Alert
  3. EA-10 Entry Alert

Dakota Alert EA-10 Entry Alert Owner's manual

  • Hello! I've reviewed the user manual for the Dakota Alert Entry Alert EA-10. This document outlines how to install batteries, operate the device, adjust the volume, and properly position the sensor for optimal performance. I'm ready to answer any questions you might have about this device and its features.
  • What type of batteries does the device use?
    How do I turn the device on?
    What kind of sound does the device make?
    Where should the sensor be placed?
    Can I use this device in the dark?
EA-10 • Entry Alert
The battery operated device can be used in both commercial and residential locations. For commercial locations,
the device can be placed by the entrance to detect the entry or exit of customers to the store.
For residential locations, it can be placed by the door to detect the entry or exit of visitors to the house or room.
Dakota Alert
EA-10
Made in China
Sound 80dB at “high” volume
“Ding~Dong” bell sound
Battery 2 x C sized batteries
Dimension 5.1” x 4.7” x 1.4”
OPERATING INSTRUCTIONS
INSTALLING THE BATTERIES
1. This device operates on two “C” sized batteries.
2. Remove the battery compartment cover.
3. Insert the batteries into the battery compartment with correct
polarity as indicated.
OPERATION
1. Slide the Power Switch to “ON” position.
2. A “Ding~Dong” tone should follow whenever a visitor walks in
front of the device.
3. Adjust sound level by using the volume control Hi/Lo switch.
LOCATION OF THE DEVICE
1. The device can be placed on a table or mounted onto the
wall.
2. The sensor should be placed where it is perpendicular to the
walking direction.
3. Lighting conditions: stable and bright light is required. This device
is not suitable for places where lighting is dim, ashy or unstable.
SPECIFICATIONS
PARTS & FUNCTIONS
1. Sensor
2. Power On/Off switch
3. Volume control Hi/Lo switch
4. Battery compartment
/