Metra Electronics CS-HDBTLPOE-70 User manual

Category
Video splitters
Type
User manual

This manual is also suitable for

Metra Electronics CS-HDBTLPOE-70 is an HDMI Extender over Cat5e/Cat6, designed to extend HDMI signals over long distances, making it ideal for large homes, offices, or any application where HDMI signals need to be transmitted over long distances. It supports 4K x 2K resolution at 30Hz, 1080p resolution at 60Hz, and 3D video formats. Additionally, it supports bidirectional infrared control, allowing you to control devices at either end of the connection.

Metra Electronics CS-HDBTLPOE-70 is an HDMI Extender over Cat5e/Cat6, designed to extend HDMI signals over long distances, making it ideal for large homes, offices, or any application where HDMI signals need to be transmitted over long distances. It supports 4K x 2K resolution at 30Hz, 1080p resolution at 60Hz, and 3D video formats. Additionally, it supports bidirectional infrared control, allowing you to control devices at either end of the connection.

HDMI Extender over Cat5e/Cat6
CS-HDBTPOE-100 (HD BaseT)
User manual
Thank you for purchasing this product. For optimum performance and safety, please
read these instructions carefully before connecting, operating or adjusting this
product. Please keep this manual for future reference.
1
I. Introduction
The HDMI Extender over cat5e/cat6 is a tool for extending your HDMI signal over
long distances to a compatible display. It is designed to convert HDMI signal to
standard HDBaseT signal and transmit by LAN cable. It also supports Transfer
Bidirectional Infrared control signal together with the HDMI signal, so you can
control the Source in the Display side up to 100 meters outside, also you can control
the Display in the Source side up to 100 meters outside using the HDMI Extender.
II. Features
One pair as a full functional module, no need for setting adjustments.
POE (Power Over Ethernet) function support, either TX or RX powered
12V@2.5A,another device will no need power form the DC jack. POE Power
2
Consumption less than 10W.
Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to achieve long
distance transmission.
UTP cable termination follows the standard of IEEE-568B.
Transmission distance:
100 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;
70 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D1080P@60Hz@36bit
4K x 2K@30Hz@24bit.
HDMI V1.4 supported.
HDCP compliant.
Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels, 3D
1080P60Hz and 4K x 2K@30Hz@24bit
Transfer Bidirectional Infrared control signal together with the HDMI signal.
3
III. Package
HDMI Extender Transmitter -------------------------------------------------------- 1PC
HDMI Extender Receiver ------------------------------------------------------------ 1PC
IR Transmitter -------------------------------------------------------------------------- 2PCS
IR Receiver ----------------------------------------------------------------------------- 2PCS
12V2.5A DC Power Supply adapter ------------------------------------------------ 1PCS
Operation Manual --------------------------------------------------------------------- 1PC
IV. Specifications
Frequency Bandwidth 2.97Gbps
HDMI Transmitter Input/Output Ports 1x HDMI Female port/1 x CAT6
1x IR Transmitter/1x IR Receiver
4
HDMI Receiver Input/Output Ports 1 x HDMI Female port/1 x CAT6
1x IR Transmitter/1x IR Receiver
Power Supply DC 12V 2.5A
ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (mm) 65(W) X 100 (D) X 25 (H)
Weight 200g x 2
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity 20 ~ 90% RH (Non-condensing)
Power Consumption (Max) 20W
5
V. Operation controls and Functions
Transmitter
DC IN: Plug the 12V DC power supply into the unit.
IR OUT: Channel 1 IR Transmitter.
IR IN: Channel 2 IR Receiver.
HDMI IN: HDMI Input port.
6
HDMI Signal OUT: Standard HDBaseT signal output port
LINK LED: This red LED illuminates when the Transmitter and Receiver is connected
with LAN cable.
Receiver
DC IN: Plug the 12V DC power supply into the unit.
IR IN: Channel 1 IR Receiver.
IR OUT: Channel 2 IR Transmitter.
HDMI OUT: HDMI Output port.
HDMI Signal IN: Standard HDBaseT signal input port
7
LINK LED: This red LED illuminates when the Transmitter and Receiver is connected
with LAN cable.
VI. Application Example
8
© Copyright 2014 Metra Electronics Corporation
460 Walker Street, Holly Hill, FL 32117-2699
Specifications are subject to change without notice.
All trademarks are the property of their respective owners.
1.866.839.9187
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Metra Electronics CS-HDBTLPOE-70 User manual

Category
Video splitters
Type
User manual
This manual is also suitable for

Metra Electronics CS-HDBTLPOE-70 is an HDMI Extender over Cat5e/Cat6, designed to extend HDMI signals over long distances, making it ideal for large homes, offices, or any application where HDMI signals need to be transmitted over long distances. It supports 4K x 2K resolution at 30Hz, 1080p resolution at 60Hz, and 3D video formats. Additionally, it supports bidirectional infrared control, allowing you to control devices at either end of the connection.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI