Electrolux TBS3 User manual

Brand: Electrolux

Model: TBS3

Type: User manual

This manual is also suitable for

TBS2

SPAZZOLA ELETTRICA

POWER NOZZLE

ROTO-BROSSE

ELEKTRO-SAUGBORSTE

4 5

f 3 I a

2 O

1 C

9 8 7 6

"' 10

3 7

ItalIano Fran~ais

1 Condotto aspirante 1 buve1;1ure d.aspiration

2 Bocchettone d.aspirazione 2 Emboutd.aspiration

3 Clip d.aggancio 3 Crochet pe rangement

4 Cordone con spina 4 Cordon àvec prise

5 Clips (OPZIONALE) 5 Clip:s (OPTIONAL)

6 Bronzine e posizionamento rullo 6 Palier du rouleau brosseur

7 Rullo-spazzola 7 Rouleau brosseur

8 Cinghia di 1rasmissione 8 Courroie d:entrainement

9 Albero motore 9 Arbre du moteur

10 Piastra fondo 10 Plaque de fond

11 Vite di iissaggio 11 Visde fixation

.~!\: -c?;jj Engllsh Deutsch

P1P 1 Suction channel 1 Saugkanal

2 Suction inlet 2 Saugstutzen

3 Hose storage clip 3 Haken f(jr das Ordnungssystem

4 Supply cord with plug for cleaner 4 AnschluBleitung mit Gerate-

5 Clamps (OPTION) stecker

6 Rotating brush holder 5 Klipse (OPTION)

7 Rotating brush 6 B(jrstwalzen-Lager

8 Drlve belt 7 B(jrstwalze

9 Motor spindle 8 Antriebsriemen

10 Base plate 9 Motorwelle

11 Fixing screw 10 Bodenplatte

11 Befestigungsschraube

English Fig 2 Flg 7 Changing the drive belt

Fur, iong fringes and long pile car- Replace the drive belt onto the plastic Stretched, torn or faulty drive belts

pets should not be cleaned with the rlng of the brush and around the shQ41d be changed

power nozzle Short pile carpets motor spindle Piace the base plate Assembly should be carried OUt as

should be cleaned in the direction of on the houslng, maklng sure that mentioned in the paragraph "Adjust-

the arrow both notches fit into the slots and sec- ment of the rotating brush" , however ,

ure with the screw make sure when inserting the brush

C'eaning and care, .that the position of the markings on

Larger pieces of paper, cigarettes etc Changlng the rotatlng brush the holders has notaccidentally been

can block the nozzle and reduce the If the bristles have eroded so much altered

Before use suction that the brush can not be adjusted,

Read the instructions for use care- then the brush should be replaGed Malfunctions

fully and retain for future reference Fig 3 Assembllng 15 the sa~,e as men- If the power nozzle does not work

When reading the instructions un- The interior of the power nozzle tloned In the paragraph AdJustment satlsfactorlly (reduced suctlon

fold the booklet to compare th~ pic- should be checked and cleaned from of the rotating brush". However, power, unusual noise etc), then the

tures and text time to time Unscrew the fixing when Insertlng the new brush, make suctlon channel, suctlon Inlet or ac-

screw on th.e base plate with the aid I sure that the marklngs (notches) are cessorles of the vacuum cleaner

of a screw driver or coin and remove faclng downwards -to flrst flt these mlght be blocked or malntenance

..it Dirt can now be easily removed ( sldes Into the guJdes mentioned in the instructionsfor use

.Preparatlon of the appllance must be carrled OUt

Fig 1 Fig. 4

Attach the power nozzle onto the If long threads or haìr have wound

vacuum cleaner in the same way as themselves around the brush, cut

any other nozzle Connect the plug them, and they will be sucked intothe

of the power nozzle with the socket dust bag next time it is used

of the vacuum cleaner Fix the supply

cord onto the suction hose and ex- Fig 5

tension tubes with the aid of the en- Adjustment of theJotating brush

closed clips When the cleaning efficiency of the

brush decreases, due to the wearing

of the bristles, this can be corrected

Use by adjusting it

The power nozzle can be switched Loosen the fixing screw and remove

pn and off at the same time as the the base plate Pull the drlve belt

vacuum cleaner sideways from the motor spindle and

remove the rotatìng brush with the

holders OUt of the guides

Using the power nozzle Fig. 6

By means of the motor drivenJotatìng In order to alter the distance between ,

brush, carpets and rugs are the brush and floor, turn the hoiders

thoroughly cleaned Dust, fluff, upwards180oandplaceintheguides

thread and animai hair can be easily so that both markings (notches) are

removed by the SOft spirai brush. visible

SAFETY POINTS TO NOTE:

This electrical appliances comply with technical and safety regulations.

We are required to advise you for the followlng points

This applaince complies wìth EEC regulation 76/889 concerning radio and TV

suppression

The power nozzle should only be plugged into the appliance socket on the

vacuum cleaner

Warning

.Before cleaning and maintenance, make sure that the vacuum cleaner is

switched off and unplugged from the mains supply

.Use only on dry surfaces.

.Do not run over the supply cord with the power nozzle.

.Do not allow electrical parts of the appliance to come into contact with

water The producer reserve the right to change

.Do not use the appliance if the ho\Jsing or supply cord are damaged. specifications!

.Do not unplug the appliance by pulling the supply cord.

.The user is liable for the result of damage caused by the ìmproper use or

handlìng and faulty service of the appliance

6 7

Electrolux TBS3 User manual

Brand: Electrolux

Model: TBS3

Type: User manual

This manual is also suitable for

TBS2

Download PDF

report

Electrolux TBS3 User manual

This manual is also suitable for

Electrolux TBS3 User manual

Related papers

Other documents