Nortel Networks 2500 SERIES User manual

Nortel Ethernet Routing Switch 2500 Series

Overview — System

Conﬁguration

NN47215-500 (323162-B)

.

Document status: Standard

Document version: 02.02

Document date: 19 November 2007

Sourced in Canada, India, and the United States of America

The information in this document is subject to change without notice. The statements, conﬁgurations, technical

data, and recommendations in this document are believed to be accurate and reliable, but are presented without

express or implied warranty. Users must take full responsibility for their applications of any products speciﬁed in this

document. The information in this document is proprietary to Nortel Networks.

The software described in this document is furnished under a license agreement and may be used only in accordance

with the terms of that license. The software license agreement is included in this document.

Trademarks

*Nortel, Nortel Networks, the Nortel logo, and the Globemark are trademarks of Nortel Networks.

Adobe and Adobe Reader are trademarks of Adobe Systems Incorporated.

Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation.

Trademarks are acknowledged with an asterisk (*) at their ﬁrst appearance in the document.

All other trademarks are the property of their respective owners.

Restricted rights legend

Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subparagraph

(c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013.

Notwithstanding any other license agreement that may pertain to, or accompany the delivery of, this computer

software, the rights of the United States Government regarding its use, reproduction, and disclosure are as set forth

in the Commercial Computer Software-Restricted Rights clause at FAR 52.227-19.

Statement of conditions

In the interest of improving internal design, operational function, and/or reliability, Nortel Networks reserves the right

to make changes to the products described in this document without notice.

Nortel Networks does not assume any liability that may occur due to the use or application of the product(s) or

circuit layout(s) described herein.

rights reserved. Redistribution and use in source and binary forms of such portions are permitted, provided that the

above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising

materials, and other materials related to such distribution and use acknowledge that such portions of the software

were developed by the University of California, Berkeley. The name of the University may not be used to endorse or

promote products derived from such portions of the software without speciﬁc prior written permission.

SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE.

In addition, the program and information contained herein are licensed only pursuant to a license agreement that

contains restrictions on use and disclosure (that may incorporate by reference certain limitations and notices

imposed by third parties).

Nortel Networks software license agreement

This Software License Agreement ("License Agreement") is between you, the end-user ("Customer") and Nortel

Networks Corporation and its subsidiaries and afﬁliates ("Nortel Networks"). PLEASE READ THE FOLLOWING

CAREFULLY. YOU MUST ACCEPT THESE LICENSE TERMS IN ORDER TO DOWNLOAD AND/OR USE THE

SOFTWARE. USE OF THE SOFTWARE CONSTITUTES YOUR ACCEPTANCE OF THIS LICENSE AGREEMENT.

If you do not accept these terms and conditions, return the Software, unused and in the original shipping container,

within 30 days of purchase to obtain a credit for the full purchase price.

"Software" is owned or licensed by Nortel Networks, its parent or one of its subsidiaries or afﬁliates, and is

copyrighted and licensed, not sold. Software consists of machine-readable instructions, its components, data,

audio-visual content (such as images, text, recordings or pictures) and related licensed materials including all whole

or partial copies. Nortel Networks grants you a license to use the Software only in the country where you acquired the

Software. You obtain no rights other than those granted to you under this License Agreement. You are responsible for

the selection of the Software and for the installation of, use of, and results obtained from the Software.

1.

Licensed Use of Software. Nortel Networks grants Customer a nonexclusive license to use a copy of the

Software on only one machine at any one time or to the extent of the activation or authorized usage level,

whichever is applicable. To the extent Software is furnished for use with designated hardware or Customer

furnished equipment ("CFE"), Customer is granted a nonexclusive license to use Software only on such

hardware or CFE, as applicable. Software contains trade secrets and Customer agrees to treat Software as

conﬁdential information using the same care and discretion Customer uses with its own similar information that it

does not wish to disclose, publish or disseminate. Customer will ensure that anyone who uses the Software

does so only in compliance with the terms of this Agreement. Customer shall not a) use, copy, modify, transfer or

distribute the Software except as expressly authorized; b) reverse assemble, reverse compile, reverse engineer

or otherwise translate the Software; c) create derivative works or modiﬁcations unless expressly authorized; or d)

sublicense, rent or lease the Software. Licensors of intellectual property to Nortel Networks are beneﬁciaries of

this provision. Upon termination or breach of the license by Customer or in the event designated hardware or

CFE is no longer in use, Customer will promptly return the Software to Nortel Networks or certify its destruction.

Nortel Networks may audit by remote polling or other reasonable means to determine Customer’s Software

activation or usage levels. If suppliers of third party software included in Software require Nortel Networks to

include additional or different terms, Customer agrees to abide by such terms provided by Nortel Networks

with respect to such third party software.

2. Warranty. Except as may be otherwise expressly agreed to in writing between Nortel Networks and Customer,

Software is provided "AS IS" without any warranties (conditions) of any kind. NORTEL NETWORKS DISCLAIMS

ALL WARRANTIES (CONDITIONS) FOR THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING,

BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE AND ANY WARRANTY OF NON-INFRINGEMENT. Nortel Networks is not obligated

to provide support of any kind for the Software. Some jurisdictions do not allow exclusion of implied warranties,

and, in such event, the above exclusions may not apply.

3. Limitation of Remedies. IN NO EVENT SHALL NORTEL NETWORKS OR ITS AGENTS OR SUPPLIERS BE

LIABLE FOR ANY OF THE FOLLOWING: a) DAMAGES BASED ON ANY THIRD PARTY CLAIM; b) LOSS

OF, OR DAMAGE TO, CUSTOMER’S RECORDS, FILES OR DATA; OR c) DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS),

WHETHER IN CONTRACT, TORT OR OTHERWISE (INCLUDING NEGLIGENCE) ARISING OUT OF YOUR

USE OF THE SOFTWARE, EVEN IF NORTEL NETWORKS, ITS AGENTS OR SUPPLIERS HAVE BEEN

ADVISED OF THEIR POSSIBILITY. The foregoing limitations of remedies also apply to any developer and/or

supplier of the Software. Such developer and/or supplier is an intended beneﬁciary of this Section. Some

jurisdictions do not allow these limitations or exclusions and, in such event, they may not apply.

4.

General

a. If Customer is the United States Government, the following paragraph shall apply: All Nortel Networks

Software available under this License Agreement is commercial computer software and commercial

computer software documentation and, in the event Software is licensed for or on behalf of the United States

Government, the respective rights to the software and software documentation are governed by Nortel

Networks standard commercial license in accordance with U.S. Federal Regulations at 48 C.F.R. Sections

12.212 (for non-DoD entities) and 48 C.F.R. 227.7202 (for DoD entities).

b. Customer may terminate the license at any time. Nortel Networks may terminate the license if Customer

fails to comply with the terms and conditions of this license. In either event, upon termination, Customer

must either return the Software to Nortel Networks or certify its destruction.

c. Customer is responsible for payment of any taxes, including personal property taxes, resulting from

Customer’s use of the Software. Customer agrees to comply with all applicable laws including all applicable

export and import laws and regulations.

d. Neither party may bring an action, regardless of form, more than two years after the cause of the action

arose.

e. The terms and conditions of this License Agreement form the complete and exclusive agreement between

Customer and Nortel Networks.

f. This License Agreement is governed by the laws of the country in which Customer acquires the Software.

If the Software is acquired in the United States, then this License Agreement is governed by the laws of

the state of New York.

5

Contents

New in this release 15

Features 15

Other changes 15

Introduction 17

Before you begin 17

Text conventions 17

Related publications 19

How to get help 20

Getting help from the Nortel web site 20

Getting help through a Nortel distributor or reseller 20

Getting help over the phone from a Nortel Solutions Center 20

Getting help from a specialist by using an Express Routing Code 20

Ethernet Routing Switch 2500 Series hardware 23

Hardware components of the Ethernet Routing Switch 2500 Series 23

Front panel 23

Back panel 29

Network conﬁguration examples 34

Small ofﬁce desktop switch application 34

Branch ofﬁce workgroup switch application 35

Medium sized ofﬁce wiring closet switch application 36

Nortel Ethernet Routing Switch 2500 Series stacking 39

Stacking capabilities 39

Stacking functionality delivery 40

Stack enabled switches 40

Standalone conﬁguration with license ﬁles 40

Stack conﬁguration 45

Conﬁguring the operational mode on rear ports using the CLI 46

rear-ports mode command 46

show rear-ports mode command 46

Conﬁguring the operational mode of rear ports using the Device Manager 47

Rear ports and stacking 47

Initial stack installation 49

Stack MAC address 49

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

6 Contents

Stack conﬁgurations 49

Temporary base unit 51

Redundant cascade stacking 52

Removing a stack unit 53

Adding/Replacing a stack unit 53

Auto Unit Replacement 54

AUR function 55

Conﬁguring AUR using the CLI 61

Conﬁguring AUR using Device Manager 63

System conﬁguration software features 65

Switch management features 65

Conﬁguration and switch management 65

Console port settings 66

Switch banner 66

User name and password 66

Logging in 67

Autosave feature 68

Using SNTP 68

Using DNS to ping and Telnet 69

BootP automatic IP conﬁguration/MAC address 70

Choosing a BootP request mode 70

Flash memory storage 72

Conﬁguration File Download/Upload 73

Requirements 73

Binary conﬁguration ﬁle 73

ASCII conﬁguration ﬁle 74

Autotopology 74

Link Layer Discovery Protocol (IEEE 802.1ab) 74

Ethernet port management features 77

Autosensing and autonegotiation 77

Custom Autonegotiation Advertisements 77

High speed ﬂow control 78

Rate Limiting Conﬁguration 79

Other features 79

RFCs 79

Standards 80

CLI Basics 81

CLI command modes 82

Port numbering 85

Port numbering in Standalone Mode 85

Accessing CLI 86

Setting the system username and password 87

Getting help 87

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

Contents 7

Basic navigation 87

General navigation commands 88

Keystroke navigation 88

help command 89

no command 90

default command 90

logout command 90

enable command 91

conﬁgure command 91

interface command 91

disable command 92

end command 92

exit command 92

reload command 93

shutdown command 94

Managing basic system information 96

show sys-info command 96

show tech command 97

Managing MAC address forwarding database table 98

show mac-address-table command 98

mac-address-table aging-time command 99

default mac-address-table aging-time command 99

Getting Started with Device Manager 101

Installing Device Manager 101

JDM installation precautions 102

Installing the Device Manager software 102

Installing JDM on Windows 102

Windows minimum requirements 103

Removing previous versions of JDM on Windows 103

Installing JDM on Windows from the CD 104

Installing JDM on Windows from the web 104

Executing the JDM installation software on Windows 105

Installing JDM on UNIX or Linux 110

Minimum requirements 111

Installing JDM on Solaris from the CD 111

Installing JDM on Linux from the CD 111

Installing JDM on UNIX or Linux from the web 112

Executing the JDM installation software on UNIX or Linux 113

Removing JDM in Unix or Linux environments 118

Device Manager basics 119

Starting Device Manager 119

Setting the Device Manager properties 120

Opening a device 123

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

8 Contents

Device Manager window 126

Menu bar 127

Toolbar 127

Device view 128

Shortcut menus 131

Status bar 133

Using the buttons in Device Manager dialog boxes 133

Editing objects 133

Working with statistics and graphs 134

Types of statistics 134

Types of graphs 135

Statistics for single and multiple objects 137

Viewing statistics as graphs 138

Telnet session 140

Opening an SSH connection to the device 140

Opening the web-based management home page 141

Trap log 142

Online Help 143

Using the Web-based management interface 145

Requirements 145

Logging in to the web-based management interface 146

Menu 147

Management page 149

Viewing stack information 151

Viewing summary information 153

Changing stack numbering 154

Identifying unit numbers 155

Power over Ethernet for the Ethernet Routing Switch 2526T-PWR

and 2550T-PWR 157

Diagnosing and correcting PoE problems 158

Status codes on PoE ports 158

Conﬁguring PoE switch parameters using the CLI 158

poe poe-pd-detect-type command 158

poe poe-power-usage-threshold command 159

poe poe-trap command 160

no poe-trap command 160

Conﬁguring PoE port parameters using the CLI 160

no poe-shutdown command 161

poe poe-shutdown command 161

poe poe-priority command 162

poe poe-limit command 163

Displaying PoE conﬁguration using the CLI 164

show poe-main-status command 164

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

Contents 9

show poe-port-status command 165

show poe-power-measurement command 166

Conﬁguring PoE using web-based management 167

Displaying and conﬁguring power management for the switch 168

Displaying and conﬁguring power management for the ports 170

Editing and viewing switch PoE conﬁgurations using Device Manager 172

PoE tab for a single unit 172

Device Manager display for PoE ports 174

PoE tab for ports 175

System conﬁguration using the CLI 177

Conﬁguring the switch IP address, subnet mask and default gateway 177

IP notation 177

Assigning and clearing IP addresses 178

Pinging 183

Resetting the switch to default conﬁguration 184

Using DNS to ping and telnet 184

show ip dns command 185

ping command 185

ip name-server command 186

no ip name-server command 187

ip domain-name command 187

no ip domain-name command 188

default ip domain-name command 188

Conﬁguration Management 188

Automatically loading Conﬁguration ﬁle 188

ASCII Conﬁguration Generator 191

Customizing your system 193

Setting the terminal 193

Displaying system information 195

Setting boot parameters 196

Setting TFTP parameters 197

Customizing the opening banner 200

Displaying the ARP table 202

Displaying interfaces 202

show interfaces command 202

show interfaces conﬁg command 204

Saving the conﬁguration to NVRAM 205

copy conﬁg nvram command 205

write memory command 205

save conﬁg command 206

Enabling and disabling autosave 206

show autosave command 206

autosave enable command 207

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

10 Contents

no autosave enable command 207

default autosave enable command 207

Setting time on network elements using Simple Network Time Protocol 208

show sntp command 208

sntp enable command 209

no sntp enable command 209

sntp server primary address command 209

sntp server secondary address command 210

no sntp server command 210

sntp sync-now command 211

sntp sync-interval command 211

default sntp command 212

Setting local time zone 212

clock time-zone 213

no clock time-zone 213

clock summer-time 213

no clock summer-time 214

show clock time-zone 214

show clock summer-time 215

Enabling Autopology 215

autotopology command 216

no autotopology command 216

default autotopology command 216

show autotopology settings 216

show autotopology nmm-table 217

Conﬁguring LLDP using the CLI 217

lldp command 218

default lldp command 219

lldp conﬁg-notiﬁcation command 219

no lldp conﬁg-notiﬁcation command 220

default lldp conﬁg-notiﬁcation command 220

lldp tx-tlv command 221

no lldp tx-tlv command 221

default lldp tx-tlv command 222

lldp status command 222

no lldp status command 223

default lldp status command 223

show lldp command 224

show lldp port command 226

Conﬁguring LEDs to blink on the display panel 229

Upgrading software 229

download command 230

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

Contents 11

Ethernet port management using the CLI 233

Enabling or disabling a port 233

shutdown command for the port 233

no shutdown command 234

Naming ports 235

name command 235

no name command 236

default name command 236

Setting port speed 237

speed command 237

default speed command 238

duplex command 239

default duplex command 239

Enabling ﬂow control 240

ﬂowcontrol command 240

no ﬂowcontrol command 241

default ﬂowcontrol command 242

Enabling rate-limiting 242

show rate-limit command 243

rate-limit command 243

no rate-limit command 244

default rate-limit command 244

Enabling Custom Autonegotiation Advertisements (CANA) 244

show auto-negotiation-advertisements command 245

show auto-negotiation-capabilities command 245

auto-negotiation-advertisements command 246

no auto-negotiation-advertisements command 247

default auto-negotiation-advertisements command 247

Conﬁguring the switch using Device Manager 249

Viewing Unit information 249

Unit tab 250

Rate Limit tab 250

Viewing switch IP information 253

Globals tab 253

Addresses tab 254

ARP tab 255

TCP tab 256

TCP Connections tab 257

UDP Listeners tab 257

Editing the chassis conﬁguration 258

System tab 259

Agent tab 265

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

12 Contents

PowerSupply tab 267

Fan tab 268

Banner tab 269

Custom Banner tab 271

Working with conﬁguration ﬁles 272

FileSystem dialog box 272

ASCII conﬁg ﬁle 273

Save Conﬁguration tab 274

Working with SNTP 276

Conﬁguring SNTP 276

Conﬁguring local time zone using the device manager 278

Conﬁguring daylight savings time using the device manager 278

Displaying topology information using Device Manager 279

Topology tab 279

Topology Table tab 280

Conﬁguring LLDP using Device Manager 281

LLDP Globals tab 282

Port tab 285

TX Stats tab 287

Graphing LLDP transmit statistics 288

RX Stats tab 289

Graphing LLDP receive statistics 291

Local System tab 291

Local Port tab 292

Local Management tab 294

Neighbor tab 295

Neighbor Mgmt Address tab 297

Unknown TLV tab 299

Organizational Deﬁned Info tab 300

Conﬁguring ports using Device Manager 303

Viewing and editing a single port conﬁguration 303

Interface tab for a single port 304

Viewing and editing multiple port conﬁgurations 307

Interface tab for multiple ports 308

Administering the switch using web-based management 311

Viewing system information 311

Quick Start 312

Conﬁguring system security 314

Rebooting the Ethernet Routing Switch 2500 Series 315

Changing the Ethernet Routing Switch 2500 Series to system defaults 316

Logging out of the management interface 316

Conﬁguring the switch using web-based management 319

Conﬁguring BootP, IP, and gateway settings 319

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

Contents 13

Modifying system settings 322

Conﬁguring switch port status 324

Conﬁguring high speed ﬂow control 327

Downloading switch images 328

Downloading ASCII conﬁguration ﬁles 330

Storing and retrieving a switch conﬁguration ﬁle from a TFTP server 331

Requirements for storing and retrieving conﬁguration parameters on a TFTP

server 333

Enabling and disabling autosave 333

Conﬁguring port communication speed 334

Conﬁguring Rate Limiting 335

Troubleshooting 337

Interpreting the LEDs 337

Diagnosing and correcting problems 337

Normal power-up sequence 338

Port connection problems 339

Appendix A DB-9 (RS-232-D) Console/Comm Port connector 341

Appendix B Default settings 343

Appendix C Sample BootP conﬁguration ﬁle 351

Appendix D Command List 353

Appendix E Technical speciﬁcations 375

Environmental speciﬁcations 375

AC power speciﬁcations 375

Physical dimensions 376

Performance speciﬁcations 376

Network protocol and standards compatibility 376

Safety agency certiﬁcation 377

Electromagnetic emissions 377

Electromagnetic immunity 378

Index 379

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

14 Contents

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

15

New in this release

The following sections detail what’s new in Overview — System

Conﬁguration (NN47215-500) for Release 4.1:

•

Features

•

Other changes

Features

For information about changes that are feature related, see the following

sections:

•

"Stacking capabilities" (page 39)

•

"Stacking functionality delivery" (page 40)

•

"Stack conﬁgurations" (page 49)

•

"Auto Unit Replacement" (page 54)

Other changes

For information about changes that are not feature-related, see the following

sections:

•

Information on the new ﬁelds StackInsertionUnitNumber and

AutoUnitReplacementEnabled are updated for the System tab under

Conﬁguring the switch using Device Manager chapter. For more

information, see "System tab" (page 259)

•

Changed the screen for License File tab. For more information, see

"Copying the license ﬁle using the Java Device Manager" (page 42)

•

Information on the new tabs Time Zone and Daylight Saving Time are

updated with new procedure and screens. For more information, see

"Conﬁguring local time zone using the device manager" (page 278)

•

"Conﬁguring daylight savings time using the device manager" (page 278)

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

16 New in this release

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

17

Introduction

This guide provides information about conﬁguring and managing basic

switching features on the Nortel Ethernet Routing Switch 2500 Series.

This guide describes the features of the following Nortel switches.

•

Nortel Ethernet Routing Switch 2526T

• Nortel Ethernet Routing Switch 2526T-PWR

•

Nortel Ethernet Routing Switch 2550T

•

Nortel Ethernet Routing Switch 2550T-PWR

The term "Ethernet Routing Switch 2500 Series" is used in this document to

describe the features common to the switches mentioned above.

A switch is referred to by its speciﬁc name while describing a feature

exclusive to the switch.

The Ethernet Routing Switch 2500 Series operates in the Standalone Mode

and Stacking Mode in this product release.

Before you begin

This guide is intended for network administrators who have the following

background:

•

basic knowledge of networks, switching, Ethernet bridging, and IP

routing

•

familiarity with networking concepts and terminology

•

basic knowledge of network topologies

Text conventions

This guide uses the following text conventions:

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

18 Introduction

angle brackets (< >) Indicate that you choose the text to enter based on the

description inside the brackets. Do not type the brackets

when entering the command.

Example: If the command syntax is

ping <ip_address>, you enter

ping 192.32.10.12

bold body text

Indicates objects such as window names, dialog box

names, and icons, as well as user interface objects such

as buttons, tabs, and menu items.

braces ({}) Indicate required elements in syntax descriptions where

there is more than one option. You must choose only

one of the options. Do not type the braces when

entering the command.

Example: If the command syntax is

show ip {alerts|routes}, you must enter either

show ip alerts or show ip routes, but not both.

brackets ([ ]) Indicate optional elements in syntax descriptions. Do

not type the brackets when entering the command.

Example: If the command syntax is

show ip interfaces [-alerts], you can enter

either show ip interfaces or

show ip interfaces -alerts.

italic text Indicates variables in command syntax descriptions.

Also indicates new terms and book titles. Where a

variable is two or more words, the words are connected

by an underscore.

Example: If the command syntax is

show at <valid_route>,

valid_route is one variable and you substitute one

value for it.

plain Courier

text

Indicates command syntax and system output, for

example, prompts and system messages.

Example: Set Trap Monitor Filters

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

Related publications 19

separator ( > ) Shows menu paths.

Example: Protocols > IP identifies the IP command on

the Protocols menu.

vertical line ( | )

Separates choices for command keywords and

arguments. Enter only one of the choices. Do not type

the vertical line when entering the command.

Example: If the command syntax is

show ip {alerts|routes}, you enter either

show ip alerts or show ip routes, but not both.

Related publications

For more information about using the Ethernet Routing Switch 2500, see

the following publications:

• Nortel Ethernet Routing Switch 2500 Series Release NotesNortel

Ethernet Routing Switch 2500 Series Release Notes — Software

Release 4.0 (NN47215-400)

Documents important changes about the software and hardware that

are not covered in other related publications.

•

Nortel Ethernet Routing Switch 2500 Series Conﬁguration — VLANs,

Spanning Tree, and MultiLink Trunking (NN47215-501)

Describes how to conﬁgure Virtual Local Area Networks (VLAN),

Spanning Tree Protocol (STP), and MultiLink Trunk (MLT) features for

the Nortel Ethernet Routing Switch 2500.

•

Nortel Ethernet Routing Switch 2500 Series Conﬁguration — Quality

of Service (NN47215-504)

Describes how to conﬁgure and manage Quality of Service and IP

Filtering features for the Nortel Ethernet Routing Switch 2500.

•

Nortel Ethernet Routing Switch 2500 Series Security — Conﬁguration

and Management (NN47215-505)

Describes how to conﬁgure and manage security for the Nortel Ethernet

Routing Switch 2500.

•

Nortel Ethernet Routing Switch 2500 Series Performance Management

— System Monitoring (NN47215-502)

Describes how to conﬁgure system logging and network monitoring,

and how to display system statistics for the Nortel Ethernet Routing

Switch 2500.

•

Nortel Ethernet Routing Switch 2500 Series Conﬁguration — IP

Multicast (NN47215-503)

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

20 Introduction

Describes how to conﬁgure IP Multicast Routing Protocol features for

the Nortel Ethernet Routing Switch 2500.

How to get help

This section explains how to get help for Nortel products and services.

Getting help from the Nortel web site

The best way to get technical support for Nortel products is from the Nortel

Technical Support web site:

w

ww.nortel.com/support

This site provides quick access to software, documentation, bulletins, and

tools to address issues with Nortel products. More speciﬁcally, the site

enables you to:

• download software, documentation, and product bulletins

•

search the Technical Support web site and the Nortel Knowledge Base

for answers to technical issues

•

sign up for automatic notiﬁcation of new software and documentation

for Nortel equipment

•

open and manage technical support cases

Getting help through a Nortel distributor or reseller

If you purchased a service contract for your Nortel product from a distributor

or authorized reseller, contact the technical support staff for that distributor

or reseller.

Getting help over the phone from a Nortel Solutions Center

If you do not ﬁnd the information you require on the Nortel Technical Support

web site, and have a Nortel support contract, you can also get help over the

phone from a Nortel Solutions Center.

In North America, call 1-800-4NORTEL (1-800-466-7835).

Outside North America, go to the following web site to obtain the phone

number for your region:

w

ww.nortel.com/callus

Getting help from a specialist by using an Express Routing Code

An Express Routing Code (ERC) is available for many Nortel products and

services. When you use an ERC, your call is routed to a technical support

person who specializes in supporting that product or service. To locate the

ERC for your product or service, go to:

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

.

Page is loading ...

Nortel Networks 2500 SERIES User manual

Nortel Networks 2500 SERIES User manual

Related papers

Other documents