Konica Minolta Network Setup User manual

User Manual

PageScope

Network Setup 3.1

i

Foreword

Welcome

Thank you for using KONICA MINOLTA PageScope Network Setup.

PageScope Network Setup is utility software which allows simple

network setup of devices such as printers. It allows setup of devices on

networks connected using TCP/IP or IPX protocol to be handled

together.

PageScope Network Setup supports the following functions.

• Displays a list of devices on the network.

• Allows a user to verify and change the network and print settings for

devices.

• Accesses the Web settings page in the device.

• Allows monitoring of the device status.

• Displays alert and output tray information for a device.

Trademark Acknowledgements

KONICA MINOLTA and KONICA MINOLTA logo are trademarks or

registered trademarks of KONICA MINOLTA HOLDINGS, INC.

PageScope is a trademark or a registered trademark of KONICA

MINOLTA BUSINESS TECHNOLOGIES, INC.

Ethernet is a registered trademark of Xerox Corporation.

Microsoft, Windows, and Windows NT are registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other

countries.

Novell and NetWare are registered trademarks of Novell, Inc., in the

United States and other countries.

All other product names are trademarks or registered trademarks of

their respective holders.

Copyright

©

2002 KONICA MINOLTA BUSINESS

The information contained in this manual is subject to change

without notice.

ii

Contents

CONTENTS

1 System Requirements ................................ 1

2 Installing and Starting PageScope

Network Setup ............................................. 2

2.1 Installing PageScope Network Setup........... 2

2.2 Starting PageScope Network Setup............. 2

2.3 Uninstalling PageScope Network Setup ...... 3

2.3.1 For Windows 95/98/Me/NT/2000........... 3

2.3.2 For Windows XP.................................... 3

3 Browsing Network Devices ........................ 4

3.1 Screen Configuration .................................... 4

3.2 Verifying Device Setup Status ...................... 8

3.3 Displaying the Device Alert Property........... 9

3.4 Displaying Device Output Tray

Information ................................................... 10

Contents

iii

4 Changing the Device Setup...................... 11

4.1 Configuring Device Information ................. 11

4.2 Configuring TCP/IP...................................... 13

4.3 NetWare Print Setup .................................... 15

4.3.1 Setting up the Print Server ................ 16

4.3.2 Selecting the Mode ............................. 17

4.3.3 Selecting the Print Queue .................. 19

4.3.4 Selecting Users for Event

Notification .......................................... 21

4.3.5 Verifying the Setup ............................. 22

5 Option Setup ............................................. 24

5.1 Selecting a Protocol .................................... 24

5.2 Specifying the Search Range ..................... 25

5.3 Specifying BOOTP ....................................... 27

5.4 Specifying Polling Settings......................... 29

5.5 Changing the Password .............................. 30

Appendix Glossary ....................................... 31

iv

Contents

1 System Requirements

1

1 System Requirements

The following are the minimum system requirements for installing

PageScope Network Setup.

*(1) We recommend you to use the latest version service packs when using

Windows NT 4.0 or Windows 2000.

*(2) Although this utility can work without NetWare, it is required when you

set up NetWare.

*(3) The tools provided by this utility differ according to the type of protocol

supported on the user network environment.

OS*(1)

- Windows 95/98/Me

- Windows NT 4.0

- Windows 2000

- Windows XP

Browser

- Internet Explorer 4.0 or later

NetWare Client*(2)

- Novell NetWare Client 32 (latest version)

Protocol*(3)

- TCP/IP

- IPX/SPX

2 Installing and Starting PageScope Network Setup

2

2 Installing and Starting PageScope

Network Setup

2.1 Installing PageScope Network Setup

Use the following procedure to install PageScope Network Setup.

1. Place the CD-ROM into your computer’s CD-ROM drive.

2. Start up the installation program. (setup.exe)

3. Follow the instructions that appear on your computer screen to

proceed with the installation.

The following is the default installation location used by the

installer.

C:\Program Files\KONICA MINOLTA\PageScope

Network Setup

The installer provides you with an opportunity to specify a

different location, if you want.

2.2 Starting PageScope Network Setup

1. Click

Start

→

Programs

→

KONICA MINOLTA

→

PageScope

Network Setup

→

PageScope Network Setup

.

In the case of Windows XP, click

start

→

All Programs

→

KONICA MINOLTA

→

PageScope Network Setup

→

PageScope Network Setup

.

2. When the

Login Password

dialog box appears, type in the

password.

Note

• The default password is “admin”.

• For details on changing the password, refer to

“5.5 Changing the

Password”

.

• When you start up PageScope Network Setup, it searches for devices

on the network. The search procedure can take anywhere from a few

seconds to 20 or 30 seconds or more. Wait for the search procedure to

complete before trying to do anything else.

2 Installing and Starting PageScope Network Setup

3

2.3 Uninstalling PageScope Network Setup

2.3.1 For Windows 95/98/Me/NT/2000

1. Click

Start

→

Settings

→

Control Panel

.

2. Double-click the

Add/Remove Programs

icon.

3. On the

Add/Remove Programs Properties

dialog box, select

KONICA MINOLTA PageScope Network Setup

in the list of

programs, and then click the

Add/Remove

button.

In the case of Windows 2000, click

Change or Remove

Programs

, click

KONICA MINOLTA PageScope Network

Setup

, and then click the

Change/Remove

button.

4. Follow the instructions that appear on the screen to complete the

uninstall procedure.

2.3.2 For Windows XP

1. Click

Start

→

Control Panel

.

2. Double-click the

Add or Remove Programs

icon.

3. On the

Add or Remove Programs

dialog box, select

KONICA

MINOLTA PageScope Network Setup

in the list of programs,

and then click the

Change/Remove

button.

4. Follow the instructions that appear on the screen to complete the

uninstall procedure.

3 Browsing Network Devices

4

3 Browsing Network Devices

This section explains the contents of PageScope Network Setup

screens.

3.1 Screen Configuration

➀

Menu bar

Clicking on a menu pulls it down so you can access its commands.

➁

Toolbar (for the device list)

The toolbar provides one-click access to often-used PageScope

Network Setup operations.

If you cannot see the toolbar on the display, select

Toolbars

on the

View

menu.

...Displays the properties of the device selected in the device list.

...Displays a dialog box for changing the settings of the device

selected in the device list.

...Displays alert information for the device selected in the device

list.

➆

➀

➁

➂

➃

➄

➅

3 Browsing Network Devices

5

...Displays output tray information for the device selected in the

device list.

...Quits PageScope Network Setup.

... Refreshes the device list.

...Displays on-line help.

➂

Device list

This list show devices detected on the network.

To change the width of the device list, drag the border between the

device list and browser display area.

3 Browsing Network Devices

6

Device

This is the device icon and device name. The icon that appears

differs according to the protocol used for connecting the device.

...Device connected using TCP/IP

...Device connected using IPX

Devices connected using both TCP/IP and IPX will be displayed

with the TCP/IP icon.

The background color of the icon indicates the device status.

No color: Ready

Green: Printing

Yellow: Alert

Red: Error

The device status is updated every 30 seconds (default setting).

The interval can be changed with the polling settings.

See 5.4 Specifying Polling Settings for details on changing the

polling interval.

Device Name

This is the device name for management purposes. If asterisks (*)

appear in the device name, non-ASCII characters have been used

for naming the device. In this case, we recommend that the device

name be changed as described in 4.1 Configuring Device

Information.

IP Address

This is the IP address allocated to the device.

Device Model Name

This is the device model name.

• Select

Device Search

from the

File

menu to perform a new device

search and display the latest network information on the device list.

• See 5 Option Setup for details about configuring the device

search operation.

3 Browsing Network Devices

7

➃

Status bar

When you move the mouse pointer to a toolbar button, the status bar

displays an explanation of the button’s function.

If you cannot see the status bar on the display, select

Statusbars

on

the

View

menu.

➄

Browser display area

This area displays the built-in Web setup page for the device

selected in the device list.

➅

Toolbar (for the browser display area)

The toolbar contains buttons for performing various operations in

the browser display area.

...Returns to the previously displayed page.

...Advances to the next page after the pages have been scrolled

through using the button.

...Closes the Web setup page display.

...Refreshes the contents of the Web setup page.

...Displays the current Web setup page in the standard Web

browser installed on your system.

➆

URL field

This field displays the URL of the device selected in the device list.

3 Browsing Network Devices

8

3.2 Verifying Device Setup Status

Verify the current device setup status as follows.

1. On the device list, click on the icon for the device whose setup

status you want to verify.

2. Select

Device Property

on the

File

menu.

You could also click the toolbar button.

This displays the

Properties

dialog which shows the current setup

status for the device.

• Click a button on the tree to expand an item.

• Click a button on the tree to collapse an item.

The

Properties

dialog contains the following information.

General

Displays the settings for managing the device. See 4.1 Configuring

Device Information for details about changing this setup.

NetWare Printing

Displays the setup for device NetWare printing. See 4.3

NetWare Print Setup for details about changing this setup.

3 Browsing Network Devices

9

TCP/IP

Displays the setup for device TCP/IP. See 4.2 Configuring TCP/

IP for details about changing this setup.

3. After you are finished, click the

OK

button to close the dialog box.

Note

3.3 Displaying the Device Alert Property

Follow the procedure described below to display the alert information

for the device selected in the device list.

1. In the device list, click the icon of the device whose alert

information you want to display.

2. Select

Device Alert Property

on the

File

menu. You could also

click the toolbar button.

• You cannot verify the following attributes unless you have NetWare

Client 32 installed on your system and log in to the NetWare server.

- NetWare Service Queue

- NetWare Notify User

3 Browsing Network Devices

10

3.4 Displaying Device Output Tray Information

Follow the procedure described below to display output tray

information for the device selected in the device list.

1. In the device list, click the icon of the device whose output tray

information you want to display.

2. Select

Device Output Tray Information

on the

File

menu. You

could also click the toolbar button.

4 Changing the Device Setup

11

4 Changing the Device Setup

Use the

Device Setup

dialog to change a device setup.

The following are the settings that can be configured when changing a

device setup.

• Device Information

• TCP/IP

• NetWare Print

4.1 Configuring Device Information

Perform the following steps to configure device information.

1. On the device list, click the icon of the device whose information

you want to configure.

2. Select

Device Setup

on the

Setup

menu to display the

Device

Setup

dialog box.

You could also click the toolbar button.

3. Click the

General

tab.

4 Changing the Device Setup

12

You can configure and view the following items on the

General

tab.

Device Model Name

This is the device model name. You cannot change the device

model name here.

Device Name

This is the device management name. You can type up to 16

characters into the text box to input a new name. However, if the

existing device management name exceeds 16 characters, you

can type up to 255 characters for a new name.

Only ASCII characters can be typed in. If asterisks (*) appear in

the device name, non-ASCII characters have been used for

naming the device.

Device Description

This is a description of the device. You can type up to 16

characters into the text box to input a new description. However,

if an existing description of the device exceeds 16 characters,

you can type up to 255 characters for a new description.

Only ASCII characters can be typed in. If asterisks (*) appear in

the device description, non-ASCII characters have been used for

describing the device.

4. After you are finished making the settings you want, click the

OK

button. This displays the device properties with the changed

settings in blue.

5. If the settings are correct, click the

OK

button.

The community name input dialog box appears only if the SNMP

community name has been changed to something other than the default

name. Type in the community name and then click

OK

.

4 Changing the Device Setup

13

4.2 Configuring TCP/IP

Perform the following steps to configure TCP/IP.

1. On the device list, click the icon of the device you want to

configure.

2. Select

Device Setup

on the

Setup

menu to display the

Device

Setup

dialog box.

You could also click the toolbar button.

3. Click the

TCP/IP

tab.

You can configure the following items on the

TCP/IP

tab.

IP Address Setup

• Obtain an IP address automatically

If this option is selected, the IP address is acquired from either

the DHCP server or the BOOTP server.

- DHCP Select to obtain the IP address from the

DHCP server.

- BOOTP Select to obtain the IP address from the

BOOTP server.

4 Changing the Device Setup

14

• Specify an IP address manually

When this option is selected, you can set the IP address

manually. Enter the following values.

- IP Address Device IP address

- Subnet Mask Subnet mask used with the network

- Default Gateway Default IP router address for the device

Raw Port Number

Enter the Raw port number used for peer-to-peer printing.

4. After making the settings you want, click the

OK

button. This

displays the device properties with the changed settings in blue.

5. If the settings are correct, click the

OK

button.

A message asking for confirmation to continue the setup appears.

6. Click the

Yes

button.

A message stating that it is necessary to reset may appear.

For equipment that can be reset, the following dialog appears.

7. If there are no problems with resetting now, click the

Reset Now

button.

Note

• The community name input dialog box appears only if the SNMP

community name has been changed to something other than the default

name. Type in the community name and then click

OK

.

• If both DHCP and BOOTP are selected, DHCP is given priority.

4 Changing the Device Setup

15

4.3 NetWare Print Setup

Note

Perform the following steps to configure a device for NetWare printing.

1. On the device list, click the icon of the device you want to

configure.

2. Select

Device Setup

on the

Setup

menu to display the

Device

Setup

dialog box.

You could also click the toolbar button.

3. Click the

NetWare Printing

tab.

4. Perform the following steps.

• Set up the print server. See 4.3.1 Setting up the Print Server.

• Select the mode. See 4.3.2 Selecting the Mode.

• Set up the print queue. See 4.3.3 Selecting the Print Queue.

• Select users for event notification. See 4.3.4 Selecting Users for

Event Notification.

• Verify the setup. See 4.3.5 Verifying the Setup.

Note

• You must have NetWare Client 32 installed on your system in order to

setup for NetWare printing.

• NetWare supervisor privileges are required in order to change the

NetWare Print Setup. You must login to the NetWare network with

supervisor privileges in order to configure NetWare for printing.

• You must have IPX protocol installed on your device in order to

configure a NetWare print setup.

• If you have already configured a NetWare print setup with another tool,

the existing configuration will be deleted when you complete this setting.

• Clicking the

NetWare Printing

tab downloads the device

configuration. Downloading can take anywhere from a few seconds to

20 or 30 seconds or more. Wait for the download procedure to

complete before trying to do anything else.

• The community name input dialog box appears only if the SNMP

community name has been changed to something other than the default

name. Type in the community name and then click OK.

Page is loading ...

Konica Minolta Network Setup User manual

Konica Minolta Network Setup User manual

Related papers

Other documents