Unbranded 16GS-20329 User manual

Type
User manual
2 1/2” 1 3/8”
2 3/8”
2 3/8”
1 5/8”
1 1/2”
2.58”
1.87”
1.4”
2”
2 7/8”
2 5/8”
4 7/8”
4 7/8”
1
2
3
4
6
7
8
9
10
11
5
1
2
3
4
6
7
8
9
5
1. Drain Cap
2. Silicon Gasket
3. Silicon Gasket
4. Drain Body
5. Overow
6. Silicon Gasket
7. Plastic Washer
8. Brass Locking Nut
9. Rubber Gasket
10. Chrome Locking Nut
11. Tail Pipe
1. Drain Cap
2. Silicon Gasket
3. Rubber Gasket
4. Drain Body
5. Overow
6. Rubber Gasket
7. Plastic Washer
8. Brass Locking Nut
9. Tail Pipe
vessel sink
vessel sink
counter top
supporting plywood
tail pipe
drain body
brass locking nut
silicon gasket
(with plumbers putty)
silicon gasket
(with plumbers putty)
silicon gasket
(with plumbers putty)
tail pipe
drain body
overow
overow
channel
brass locking nut
3 1/2” 3 1/2”
counter top
supporting plywood
1 5/8” Pop up Drain
Overall Drain Height: 8 1/2” (with drain open) / 8“ (with drain closed)
1 1/2” Pop up Drain
Overall Drain Height: 8 ” (with drain open) / 7 1/2“ (with drain closed)
Without Overow
Vessel Sink / Drain Installation (non-overow) Vessel Sink / Drain Installation (overow)
With Overow Without Overow With Overow
*measurements approximate
*measurements approximate
Important Information
- This installation guide is subject to change
without notice, please contact seller to request the
most updated version of this installation guide.
- Observe all local plumbing and building codes.
- This is a general installation guideline, actual
installation may vary. Consult a professional if
necessary.
- Product drawings in this installation guide is for
illustration purpose only. Actual product may vary
by models.
- Read and understand this installation guide
completely.
- It is recommended that the installation of this
product be performed by trained and experienced
installers.
- Plumers putty is recommended when installing
this product.
2015 Rev. B
  • Page 1 1

Unbranded 16GS-20329 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI