No. 342 Internal Wrench Instruction Sheet
999-998-250.10
REV. A
Printed 3/15
EC41467
©1967, 2015, RIDGID, Inc.
The Emerson logo and RIDGID logo are registered trademarks of Emerson Electric Co. or RIDGID, Inc. in the U.S. and other countries.
All other trademarks belong to their respective holders.
Retainer Spring Ring
Jaw Set
Handle & Body Assembly
No. 342 Internal Wrench Instruction Sheet
To reverse position of jaws...
Spread jaws apart with thumb on side where ring is split. Slide jaws away from handle about
1
/
2
jaw length. It is not necessary to remove
spring ring.
Maintain grip on jaws. Keep jaws in firm contact with
body of wrench turning jaws 180°.
Push jaws back against hex shoulder of body.
1
2
3
4
-
1
-
2
