Repairing Tears and Holes:

We recommend applying the patch to a clean dry surface on both the inside and outside of

the damaged fabric.

No ironing required.

1. Cut patch so it extends 1" beyond all sides of tear.

2. Partially peel back one edge of paper liner.

3. Press exposed area to fabric, slowly peel remaining paper liner while pressing carefully

to apply patch over tear.

4. Rub entire patch vigorously to seal.

Our return policy is limited to the replacement of original purchase. No other liability, responsibility or warranty is expressed or

implied. Including any regarding merchantability or suitability for a particular purpose.

Camco Manufacturing, Inc.

121 Landmark Dr. / Greensboro, NC 27409

1-800-334-2004 / www.camco.net

SFS — Top

9" x 6'

PATCH

High-tech breathable middle

layer repels rain and snow

while allowing trapped

moisture to escape.