El Rey 2083 is a versatile and high-performance device designed to enhance your productivity and creativity. With its advanced capabilities, El Rey 2083 empowers you to tackle a wide range of tasks efficiently and effectively.
Key Features:
- 4K Ultra HD Resolution: Experience stunning clarity and detail with vibrant colors and sharp images.
- HDR Support: Enjoy a wider range of colors and contrasts, resulting in more realistic and immersive visuals.
- 10-Point Multi-Touch Display: Navigate and interact with content effortlessly using intuitive gestures.
- Powerful Processor: Handle demanding applications, multitask seamlessly, and enjoy smooth performance.
El Rey 2083 is a versatile and high-performance device designed to enhance your productivity and creativity. With its advanced capabilities, El Rey 2083 empowers you to tackle a wide range of tasks efficiently and effectively.
Key Features:
- 4K Ultra HD Resolution: Experience stunning clarity and detail with vibrant colors and sharp images.
- HDR Support: Enjoy a wider range of colors and contrasts, resulting in more realistic and immersive visuals.
- 10-Point Multi-Touch Display: Navigate and interact with content effortlessly using intuitive gestures.
- Powerful Processor: Handle demanding applications, multitask seamlessly, and enjoy smooth performance.
Adacryl Admix & Bonder
Admix and Bonding Agent
DESCRIPTION:
n 100% Acrylic emulsion additive
for portland cement based
products
n Admixture in portland cement
based mixes
n High-performance acrylic
polymer bonding agent
n Non re-emulsifying bonding
agent
USES:
As an admix for stucco base coats:
n Improves workability and
handling
of stucco bases
n Promotes better hydration and
curing of stucco bases
n Improves bond between
stucco bases and strong, dense
masonry surfaces
As an admix for stucco cement
finishes:
n Increases strength of stucco
finishes
n Improves bond between stucco
finish and base coat surface
As a bonding agent:
n Increases shear bond adhesion
n Portland cement–based
products may be applied while
Parex USA Adacryl Admix &
Bonder Admix and Bonding
Agent is tacky within 3 days of
drying.
n Suitable for application with a
brush, roller, or sprayer
COMPOSITION:
n Single component liquid
n Viscosity: Low
n Color: Milky white liquid
n Water-based VOC compliant
LIMITATIONS:
n Ambient and surface temperature
must be 40ºF (4.4ºC) or higher during
application and curing time. Provide
supplemental heat and protection from
precipitation as needed.
n Use only on surfaces that are sound
clean, dry, unpainted and free from any
residue which may affect the ability of
the product to bond with the substrate.
n Avoid application in direct sunlight in
hot weather.
n Do not use with air entraining cement
or air entraining lime.
WARNING
n Read complete Warning information
printed on product container prior
to use. For medical emergency
information, call 1-800-424-9300.
n
For more information on handling this
product refer to its Material Safety Data
Sheet (MSDS). The most current MSDS and
Product Data Sheet (PDS) can be found on
our website.
n
This Product Data Sheet has been prepared
in good faith on the basis of information
available at the time of publication.
It is intended to provide users with
information about the guidelines for the
proper use and application of the covered
product(s) under normal environmental
and working conditions. Because each
project is different, Parex USA, Inc. cannot
be responsible for the consequences
of variations in such conditions, or for
unforeseen conditions.
COVERAGE:
As an acrylic bonding agent:
Approximately 200-300 sq. ft. (19-28
sq. m) per gallon depending on the
method of application and the surface
to which it is applied.
CONTAINER:
1 quart (1.0 L), 1 gal. (3.8 L) jug and
5 gal. (19 L) pail
n Storage: Protect from direct sunlight
and freezing at all times
n Do not stack more than 3 pails high
n
Shelf Life: Reference Parex USA
Expiration Date of Products Technical
Bulletin.
DRYING TIME:
As an admix, provide adequate air
circulation for drying. In enclosed
areas, external ventilation should be
used to provide air circulation. Where
temporary heated enclosures are
used, provide venting of the enclosure
to limit humidity build-up. Portland
cement based mixes with Adacryl
Admix & Bonder should cure 4 days
prior to exposure to standing water.
CLEAN-UP:
Water soluble prior to drying. Clean
tools and containers with water prior
to drying.
SURFACE PREPARATION:
As an admix:
n Clean surfaces and dampen them.
Eliminate any standing water.
Concrete with a glossy or glazed
surface appearance should be dulled
by mechanical treatment.
As an bonding agent:
n Substrate must be clean. Remove all
foreign matter, alkali deposits, oil,
dirt, etc.
n
Concrete with a glossy or glazed
surface appearance should be dulled
by chemical or mechanical treatment.
n Portland cement surfaces should be
fully cured.
n Do not apply over paint.
n
For additional options, contact
Parex USA Technical Support.
MIXING:
As an admix:
n
Use up to 1 gal (3.8 L) to 1 bag of
any Scratch & Brown or Stucco Base
Concentrate. Use up to 1 qt (1 L)
per bag of Stucco Base Sanded or
Stucco Cement Finishes. After the
dry components and the majority of
the water has been mixed, add the
acrylic admix. Mix no longer than
required to provide a uniform mixture.
DO NOT OVER-MIX. Over- mixing
entrains excessive amounts of air
which weaken the material. Do not
re-temper mixes over 20 minutes old.
As an bonding agent:
n Gently shake or stir Adacryl Admix
& Bonder before applying. DO NOT
DILUTE.
APPLICATION:
As an bonding agent:
n IMPORTANT: Stucco base coats and
cement finishes must be applied
within 3 days of application of
Adacryl Admix & Bonder.
n For best results, apply in the shade
at the rate of 250 sq. ft. per gallon
using a low-pressure sprayer.
May be brush or roller-applied.
n Stucco base coats and cement
finishes or other cement products
can still be applied after Adacryl
Admix & Bonder becomes tacky, but
not while wet.
EIFS SOLUTIONS •
STUCCO ASSEMBLIES •
TILE AND STONE SYSTEMS
ENVISION IT ALL
Facilities
French Camp, CA
North Hollywood, CA
Riverside, CA
San Diego, CA
Parex USA, Inc.
4125 E. La Palma Ave., Suite 250
Anaheim, CA 92807
(866) 516-0061 Tech Support: (800) 226-2424
Colorado Springs, CO
Haines City, FL
Duluth, GA
Redan, GA
Albuquerque, NM
Allentown, PA
San Antonio, TX
© Parex USA, Inc. January 2014 • PU AA&B DS 0114
-
1
-
2
El Rey 2083 is a versatile and high-performance device designed to enhance your productivity and creativity. With its advanced capabilities, El Rey 2083 empowers you to tackle a wide range of tasks efficiently and effectively.
Key Features:
- 4K Ultra HD Resolution: Experience stunning clarity and detail with vibrant colors and sharp images.
- HDR Support: Enjoy a wider range of colors and contrasts, resulting in more realistic and immersive visuals.
- 10-Point Multi-Touch Display: Navigate and interact with content effortlessly using intuitive gestures.
- Powerful Processor: Handle demanding applications, multitask seamlessly, and enjoy smooth performance.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
LaHabra 2085 Installation guide
-
Riverside 100069997 Installation guide
-
LaHabra 3050 Installation guide
-
LaHabra 3051 Installation guide
-
LaHabra 2502 Installation guide
-
Sika 187782 User guide
-
BriskHeat ACR 3 Hot Bonder FREE Software Update User manual
-
LaHabra 3324-00820 Installation guide
-
LaHabra 2169 Installation guide
-
Custom Building Products CBTSW50 Specification
