Cardinal Gates RC User manual

Brand
Cardinal Gates
Model
RC
Category
Wall & ceiling mounts accessories
Type
User manual

Cardinal Gates RC

are a convenient way to attach a gate to a post without damaging the post with screws. The clamps provide a secure hold, and the shim can be used to adjust for smaller newels. The clamps can be used with a variety of post thicknesses, and the duct tape or weather strip can be used to protect the finish of the post.

Possible use cases:

  • Attaching a gate to a post
  • Replacing a damaged gate clamp
  • Securing a gate in a high-wind area
  • Creating a temporary gate
  • Attaching a gate to a non-standard post size

Cardinal Gates RC

are a convenient way to attach a gate to a post without damaging the post with screws. The clamps provide a secure hold, and the shim can be used to adjust for smaller newels. The clamps can be used with a variety of post thicknesses, and the duct tape or weather strip can be used to protect the finish of the post.

Possible use cases:

  • Attaching a gate to a post
  • Replacing a damaged gate clamp
  • Securing a gate in a high-wind area
  • Creating a temporary gate
  • Attaching a gate to a non-standard post size
ASSEMBLY
INSTRUCTIONS
Round Bracket
A
C
CARDINAL GATES, INC.
79 Amlajack Way • Newnan, GA 30265
770-252-4200 • www.cardinalgates.com
D
Insert bolt with washer through clamp and screw
into T-nut on opposite clamp. The clamp with the
T-nut should be on the outside of the post. Mount
gate according to instructions. Use shim if necessary
to ensure level gate installation.
Wood Clamps provide a means for attaching your
gate to a post without damaging the post with
screws. Please follow these procedures to install a
CARDINAL GATE.
B
C
A
EXTRA SHIM
OPTION
It may be necessary to obtain longer or shorter bolts from a
hardware store, depending on post thickness.
It may be desirable to use a short piece of duct tape or weather
strip between clamp and post to protect finish. CARDINAL
GATES, INC. will not be responsible for any damage to the
finish of a post.
T-NUT
Use shim (D) between bolts
(C) and bracket (A) to adjust
for smaller newels.
B
T-NUT
ASSEMBLY
INSTRUCTIONS
Round Bracket
A
C
CARDINAL GATES, INC.
79 Amlajack Way • Newnan, GA 30265
770-252-4200 • www.cardinalgates.com
D
Insert bolt with washer through clamp and screw
into T-nut on opposite clamp. The clamp with the
T-nut should be on the outside of the post. Mount
gate according to instructions. Use shim if necessary
to ensure level gate installation.
Wood Clamps provide a means for attaching your
gate to a post without damaging the post with
screws. Please follow these procedures to install a
CARDINAL GATE.
B
C
A
EXTRA SHIM
OPTION
It may be necessary to obtain longer or shorter bolts from a
hardware store, depending on post thickness.
It may be desirable to use a short piece of duct tape or weather
strip between clamp and post to protect finish. CARDINAL
GATES, INC. will not be responsible for any damage to the
finish of a post.
T-NUT
Use shim (D) between bolts
(C) and bracket (A) to adjust
for smaller newels.
B
T-NUT
ASSEMBLY
INSTRUCTIONS
Round Bracket
A
C
CARDINAL GATES, INC.
79 Amlajack Way • Newnan, GA 30265
770-252-4200 • www.cardinalgates.com
D
Insert bolt with washer through clamp and screw
into T-nut on opposite clamp. The clamp with the
T-nut should be on the outside of the post. Mount
gate according to instructions. Use shim if necessary
to ensure level gate installation.
Wood Clamps provide a means for attaching your
gate to a post without damaging the post with
screws. Please follow these procedures to install a
CARDINAL GATE.
B
C
A
EXTRA SHIM
OPTION
It may be necessary to obtain longer or shorter bolts from a
hardware store, depending on post thickness.
It may be desirable to use a short piece of duct tape or weather
strip between clamp and post to protect finish. CARDINAL
GATES, INC. will not be responsible for any damage to the
finish of a post.
T-NUT
Use shim (D) between bolts
(C) and bracket (A) to adjust
for smaller newels.
B
T-NUT
  • Page 1 1

Cardinal Gates RC User manual

Brand
Cardinal Gates
Model
RC
Category
Wall & ceiling mounts accessories
Type
User manual

Cardinal Gates RC

are a convenient way to attach a gate to a post without damaging the post with screws. The clamps provide a secure hold, and the shim can be used to adjust for smaller newels. The clamps can be used with a variety of post thicknesses, and the duct tape or weather strip can be used to protect the finish of the post.

Possible use cases:

  • Attaching a gate to a post
  • Replacing a damaged gate clamp
  • Securing a gate in a high-wind area
  • Creating a temporary gate
  • Attaching a gate to a non-standard post size
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents