Wacker Neuson WPU1550A User manual

Brand: Wacker Neuson

Model: WPU1550A

Type: User manual

This manual is also suitable for

WPU1550Aw

Wacker Neuson WPU1550Aw is a powerful and versatile vibratory plate designed for soil compaction, concrete consolidation, and asphalt repairs. With its user-friendly design and simple operation, you can easily achieve professional results. Featuring a robust design and reliable engine, this plate compactor is built for durability and efficiency.

Operator’s Manual

Vibroplate

WPU 1550A

WPU 1550Aw

0402359en 001 0110

0402359EN

notice

All rights, including copying and distribution rights, are reserved.

This publication may be photocopied by the original purchaser of the machine. Any

other type of reproduction is prohibited without express written permission from

Wacker Neuson Corporation.

Any type of reproduction or distribution not authorized by Wacker Neuson Corporation

represents an infringement of valid copyrights. Violators will be prosecuted.

Trademarks

All trademarks referenced in this manual are the property of their respective owners.

Manufacturer

Wacker Neuson Manila Incorporated

Lot 2,Blk 1 Phase 3, PEZA Drive, First Cavite Industrial Estate, Brgy. Langkaan

Dasmariñas, Cavite, Philippines

Tel: +63-(0)2-580-7136 Fax: +63-(0)2-580-7122

www.wackerneuson.com

Translated

instructions

This Operator’s Manual presents a translation of the original instructions. The original

language of this Operator’s Manual is American English.

WPU 1550A/Aw Table of Contents

wpm_bo0402359001enTOC.fm 1

Foreword 3

1. Safety Information 4

1.1 Laws Pertaining to Spark Arresters ...................................................... 5

1.2 Operating Safety .................................................................................. 6

1.3 Operator Safety while using Internal Combustion Engines .................. 7

1.4 Service Safety ...................................................................................... 8

1.5 Label Locations .................................................................................... 9

1.6 Warning and Informational Labels ...................................................... 10

2. Technical Data 13

2.1 Engine Data ........................................................................................ 13

2.2 Machine Data ..................................................................................... 14

2.3 Sound and Vibration Measurements .................................................. 14

2.4 Dimensions ......................................................................................... 15

3. Operation 16

3.1 Recommended Fuel ........................................................................... 16

3.2 Application .......................................................................................... 16

3.3 Before Starting ................................................................................... 16

3.4 To Start ............................................................................................... 17

3.5 To Stop ............................................................................................... 17

3.6 Forward and Reverse Motion ............................................................. 18

3.7 Operation ............................................................................................ 19

Table of Contents WPU 1550A/Aw

wpm_bo0402359001enTOC.fm 2

4. Maintenance 20

4.1 Periodic Maintenance Schedule ..........................................................20

4.2 Spark Plug ...........................................................................................22

4.3 Air Cleaner ..........................................................................................23

4.4 Engine Oil ............................................................................................24

4.5 Adjusting Engine Speed ......................................................................24

4.6 Carburetor Adjustment ........................................................................25

4.7 Cleaning Sediment Cup ......................................................................25

4.8 Protection frame ..................................................................................26

4.9 Exciter Lubrication ...............................................................................27

4.10 Cleaning the Plate ...............................................................................27

4.11 Lifting Machine ....................................................................................28

4.12 Transporting Machine ..........................................................................29

4.13 Storage ................................................................................................29

4.14 Troubleshooting ...................................................................................30

wc_tx000001gb.fm 3

CALIFORNIA

Proposition 65 Warning:

Engine exhaust, some of its constituents, and certain vehicle

components, contain or emit chemicals known to the State of

California to cause cancer and birth defects or other reproductive

harm.

Foreword

This manual provides information and procedures to safely operate

and maintain this Wacker Neuson model. For your own safety and

protection from injury, carefully read, understand and observe the

safety instructions described in this manual.

Keep this manual or a copy of it with the machine. If you lose this

manual or need an additional copy, please contact Wacker Neuson

Corporation. This machine is built with user safety in mind; however,

it can present hazards if improperly operated and serviced. Follow

operating instructions carefully! If you have questions about operating

or servicing this equipment, please contact Wacker Neuson

Corporation.

The information contained in this manual was based on machines in

production at the time of publication. Wacker Neuson Corporation

reserves the right to change any portion of this information without

notice.

All rights, especially copying and distribution rights, are reserved.

No part of this publication may be reproduced in any form or by any

means, electronic or mechanical, including photocopying, without

express written permission from Wacker Neuson Corporation.

Any type of reproduction or distribution not authorized by Wacker

Neuson Corporation represents an infringement of valid copyrights

and will be prosecuted. We expressly reserve the right to make

technical modifications, even without due notice, which aim at

improving our machines or their safety standards.

WARNING

Safety Information WPU 1550A/Aw

wpm_si000461gb.fm 4

1. Safety Information

This manual contains DANGER, WARNING, CAUTION, NOTICE,

and NOTE signal words which must be followed to reduce the

possibility of personal injury, damage to the equipment, or improper

service.

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that follow this

symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

NOTICE: Used without the safety alert symbol, NOTICE indicates a

situation which, if not avoided, could result in property damage.

Note: Contains additional information important to a procedure.

DANGER

WARNING

CAUTION

WPU 1550A/Aw Safety Information

wpm_si000461gb.fm 5

1.1 Laws Pertaining to Spark Arresters

Notice: State Health Safety Codes and Public Resources Codes

specify that in certain locations spark arresters be used on internal

combustion engines that use hydrocarbon fuels. A spark arrester is a

device designed to prevent accidental discharge of sparks or flames

from the engine exhaust. Spark arresters are qualified and rated by

the United States Forest Service for this purpose.

In order to comply with local laws regarding spark arresters, consult

the engine distributor or the local Health and Safety Administrator.

Safety Information WPU 1550A/Aw

wpm_si000461gb.fm 6

1.2 Operating Safety

Familiarity and proper training are required for the safe operation of the

machine. Machines operated improperly or by untrained personnel

can be hazardous. Read the operating instructions contained in this

manual and the engine manual, and familiarize yourself with the

location and proper use of all controls. Inexperienced operators should

receive instruction from someone familiar with the machine before

being allowed to operate it.

1.2.1 Do not allow anyone to operate this equipment without proper training.

People operating this equipment must be familiar with the risks and

hazards associated with it.

1.2.2 Do not touch the engine or muffler while the engine is on or

immediately after it has been turned off. These areas get hot and may

cause burns.

1.2.3 Do not use accessories or attachments that are not recommended by

Wacker Neuson. Damage to equipment and injury to the user may

result.

1.2.4 NEVER operate the machine with the beltguard missing. Exposed

drive belt and pulleys create potentially dangerous hazards that can

cause serious injuries.

1.2.5 Never leave the machine running unattended.

1.2.6 Be sure operator is familiar with proper safety precautions and

operation techniques before using machine.

1.2.7 Always wear protective clothing appropriate to the job site when

operating the machine.

1.2.8 Wear hearing protection when operating equipment.

1.2.9 Close fuel valve on engines equipped with one when machine is not

being operated.

1.2.10 Store the machine properly when it is not being used. The machine

should be stored in a clean, dry location out of the reach of children.

1.2.11 Always operate machine with all safety devices and guards in place

and in working order. Do not modify or defeat safety devices. Do not

operate machine if any safety devices or guards are missing or

inoperative.

1.2.12 Read, understand, and follow procedures in the Operator’s Manual

before attempting to operate the machine.

WARNING

WPU 1550A/Aw Safety Information

wpm_si000461gb.fm 7

1.3 Operator Safety while using Internal Combustion Engines

Internal combustion engines present special hazards during operation

and fueling. Read and follow the warning instructions in the engine

owner’s manual and the safety guidelines below. Failure to follow the

warnings and safety standards could result in severe injury or death.

1.3.1 DO NOT run the machine indoors or in an enclosed area such as a

deep trench unless adequate ventilation, through such items as

exhaust fans or hoses, is provided. Exhaust gas from the engine

contains poisonous carbon monoxide gas; exposure to carbon

monoxide can cause loss of consciousness and may lead to death.

1.3.2 Do not smoke while operating the machine.

1.3.3 Do not smoke when refueling the engine.

1.3.4 Do not refuel a hot or running engine.

1.3.5 Do not refuel the engine near an open flame.

1.3.6 Do not spill fuel when refueling the engine.

1.3.7 Do not run the engine near open flames.

1.3.8 Refill the fuel tank in a well-ventilated area.

1.3.9 Replace the fuel tank cap after refueling.

1.3.10 ALWAYS check the fuel lines and the fuel tank for leaks and cracks

before starting the engine. Do not run the machine if fuel leaks are

present or the fuel lines are loose.

WARNING

Safety Information WPU 1550A/Aw

wpm_si000461gb.fm 8

1.4 Service Safety

A poorly maintained machine can become a safety hazard! In order

for the machine to operate safely and properly over a long period of

time, periodic maintenance and occasional repairs are necessary.

1.4.1 Do not attempt to clean or service the machine while it is running.

Rotating parts can cause severe injury.

1.4.2 Do not crank a flooded engine with the spark plug removed on

gasoline-powered engines. Fuel trapped in the cylinder will squirt out

the spark plug opening.

1.4.3 Do not test for spark on gasoline-powered engines if the engine is

flooded or the smell of gasoline is present. A stray spark could ignite

the fumes.

1.4.4 Do not use gasoline or other types of fuels or flammable solvents to

clean parts, especially in enclosed areas. Fumes from fuels and

solvents can become explosive.

1.4.5 Keep the area around the muffler free of debris such as leaves, paper,

cartons, etc. A hot muffler could ignite the debris and start a fire.

1.4.6 Replace worn or damaged components with spare parts designed and

recommended by Wacker Neuson Corporation.

1.4.7 Disconnect the spark plug on machines equipped with gasoline

engines, before servicing, to avoid accidental start-up.

1.4.8 Keep the machine clean and labels legible. Replace all missing and

hard-to-read labels. Labels provide important operating instructions

and warn of dangers and hazards.

WARNING

WPU 1550A/Aw Safety Information

wpm_si000461gb.fm 9

1.5 Label Locations

wpmgr007350

Safety Information WPU 1550A/Aw

wpm_si000461gb.fm 10

1.6 Warning and Informational Labels

Wacker Neuson machines use international pictorial labels where

needed. These labels are described below.

Label Meaning

WARNING!

To prevent hearing loss, wear hearing protec-

tion when operating the machine.

WARNING!

Hot surface!

Guaranteed sound power level in dB(A).

WARNING!

Hand injury if caught in moving belt.

Always replace beltguard.

CAUTION!

Read and understand the supplied Operator’s

Manual before operating this machine. Failure

to do so increases the risk of injury to yourself

and others.

CAUTION

Lifting point.

WPU 1550A/Aw Safety Information

wpm_si000461gb.fm 11

Throttle control lever:

Rabbit = Full or Fast

Turtle = Idle or Slow

Lifting point (manual).

DANGER!

Engines emit carbon monoxide; operate only

in well-ventilated area. Read the Operator’s

Manual.

No sparks, flames, or burning objects near the

machine. Shut off the engine before refueling.

Label-machine model

Company logo

Label Meaning

Safety Information WPU 1550A/Aw

wpm_si000461gb.fm 12

A nameplate listing the model number, item

number, revision number, and serial number is

attached to each unit. Please record the infor-

mation found on this plate so it will be avail-

able should the nameplate become lost or

damaged. When ordering parts or requesting

service information, you will always be asked

to specify the model number, item number,

revision number, and serial number of the unit.

This machine may be covered by one or more

patents.

Label Meaning

WPU 1550A/Aw Technical Data

wpm_td000398gb.fm 13

2. Technical Data

2.1 Engine Data

Engine Power Rating

Net power rating per SAE J1349. Actual power output may vary due to

conditions of specific use.

WPU 1550A

0630033

WPU 1550AW

0630034

Engine

Engine Make Honda

Engine Model GX 160 UT1 SWX2

Max. rated power @ rated

speed

kW (Hp)

3.6 (4.8) @ 3600 rpm

Spark Plug NGK BPR 6ES

Electrode Gap

mm (in.)

0.7-0.8 (0.028–0.031)

Operating speed

rpm

3600

Air Cleaner

type

Dual element

Engine Lubrication

oil grade

SAE 10W30

SG or SF

Engine Oil Capacity

ml (oz.)

600 (20)

Fuel

type

Regular unleaded gasoline

Fuel Tank Capacity

l (qts.)

3.6 (3.7)

Valve Clearance (cold)

Inlet:

Outlet:

mm (in.)

0.15 (0.006)

0.20 (0.008)

Technical Data WPU 1550A/Aw

wpm_td000398gb.fm 14

2.2 Machine Data

2.3 Sound and Vibration Measurements

The required sound specification, Paragraph 1.7.4.f of 89/392/EEC

Machinery Directive, is:

• The guaranteed sound power level (L

) = 108 dB(A).

• The sound pressure level at operator’s location (L

) = 97 dB(A).

These sound values were determined according to ISO 3744 for the

sound power level (L

) and ISO 6081 for the sound pressure level

) at the operator’s location.

The weighted effective acceleration value, determined according to

EN ISO 5349, is approximately 4.5 m/s

The sound and vibration measurements were obtained with the

machine operating on crushed gravel at nominal engine speed.

WPU 1550A

0630033

WPU 1550AW

0630034

Plate

Weight

kg (lbs.)

96 (211) 100 (220)

Water Tank Capacity

Exciter Speed

rpm

5800 ± 100

Exciter Lubrication

ml (oz.)

266 ( 9 )

Automatic Transmission Fluid

Dextron III / Mercon or equivalent

Dimensions

mm(in)

1012 (39.84) x 500 (19.69) x 586(23)

WPU 1550A/Aw Technical Data

wpm_td000398gb.fm 15

2.4 Dimensions

mm (in.)

500 (19.69)

wpmgr007349

586( 23.07 )

1012 ( 39.84)

Operation WPU 1550A/Aw

wpm_tx001424gb.fm 16

3. Operation

3.1 Recommended Fuel

The engine requires regular grade unleaded gasoline. Use only fresh,

clean gasoline. Gasoline containing water or dirt will damage fuel

system. Consult engine owner’s manual for complete fuel

specifications.

3.2 Application

This plate is designed for compacting loose granular soils, gravel, and

paving stones. It is intended to be used in confined areas and areas

next to structures such as walls, curbs, and foundations.

This plate is not recommended for compacting cohesive soils with a

heavy clay content.

3.3 Before Starting

3.3.1 Read and understand the safety and operating instructions at the

beginning of this manual.

3.3.2 Check:

• Oil level in the engine

• Fuel level

• Condition of the air cleaner

• Tightness of the external fasteners

• Condition of the fuel lines

WPU 1550A/Aw Operation

wpm_tx001424gb.fm 17

3.4 To Start

See Graphic: wc_gr007337

3.4.1 Open fuel valve by moving lever to the right (a1).

Note: If engine is cold, move choke lever to close position (b1). If

engine is hot, set choke to open position (b2).

3.4.2 Turn engine switch to “ON” (e1).

3.4.3 Pull starter rope (c).

Note: If the oil level in the engine is low, the engine will not start. If this

happens, add oil to engine. Some engines are equipped with an oil

alert light (f) that will come on while pulling the starter rope.

3.4.4 Open choke as engine warms (b2).

3.4.5 Open throttle fully to operate. (g1)

3.5 To Stop

See Graphic: wc_gr007337

3.5.1 Reduce engine RPM to idle by moving throttle completely to the left

(g2).

3.5.2 Turn engine switch to “OFF” (e2).

3.5.3 Close fuel valve by moving lever to the left (a2).

wpm_gr007337

Operation WPU 1550A/Aw

wpm_tx001424gb.fm 18

3.6 Forward and Reverse Motion

See Graphic: wpmgr007354

Depending on the position of the control lever the vibration plate compacts in

forward direction (a3), on the spot (a2) or in reverse (a1).

wpmgr007354

Page is loading ...

Wacker Neuson WPU1550A User manual

Brand: Wacker Neuson

Model: WPU1550A

Type: User manual

This manual is also suitable for

WPU1550Aw

Download PDF

report

in other languages

Deutsch: Wacker Neuson WPU1550A Benutzerhandbuch

Wacker Neuson WPU1550A User manual

This manual is also suitable for

Wacker Neuson WPU1550A User manual

in other languages

Related papers

Other documents