Cub Cadet 759-05742 User manual

Cub Cadet
Brand
Cub Cadet
Model
759-05742
Type
User manual

Cub Cadet 759-05742 allows you to enhance the capabilities of your mower with a blade extension kit. This kit includes two blade extension scraper plates, two blade extensions, eight carriage bolts, and eight hex flange lock nuts. With this kit, you can easily extend the width of your mower's blade, increasing its cutting capacity and making it more efficient for larger lawns or areas with dense growth. The blade extension scraper plates help to prevent grass and debris from building up on the underside of the blade, ensuring a clean cut and optimal performance.

Cub Cadet 759-05742 allows you to enhance the capabilities of your mower with a blade extension kit. This kit includes two blade extension scraper plates, two blade extensions, eight carriage bolts, and eight hex flange lock nuts. With this kit, you can easily extend the width of your mower's blade, increasing its cutting capacity and making it more efficient for larger lawns or areas with dense growth. The blade extension scraper plates help to prevent grass and debris from building up on the underside of the blade, ensuring a clean cut and optimal performance.

Form No. 769-23030
August 8, 2019
Contents of Carton
Ref
Part # Description
Qty
1 710-0451 Carriage Bolt 8
2 712-04063 Hex Flange Lock Nut 8
3 789-02997 Blade Extension Scraper Plate 2
4 789-03257 Blade Extension 2
Installation Sheet
759-05742 -- Blade Extension Kit
1
1
2
2
3
4
Figure 1
MTD, INC., P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
NOTE: References to left, right, front and rear of the assemblies are from operator’s position, unless
otherwise stated.
1. Remove two outer-most carriage bolts and hex flange lock nuts from blade
assembly and set aside. See Figure 2.
NOTE: Save removed hardware for reinstallation.
2. For right blade extension, attach one blade
extension scraper plate (789-02997) to lower
portion of one blade extension (789-03257) with
two carriage bolts (710-0451) and two hex flange
lock nuts (712-04063), positioning scraper plate
so it sits flush with right outside portion of blade
extension. See Figure 3.
3. For left blade extension, repeat Step 2 with
remaining blade extension scraper plate, blade
extension and associated hardware, positioning
scraper plate so it sits flush with left outside
portion of blade extension. See Figure 4.
4. Attach right blade extension assembly to right side of blade assembly with the
following steps:
a. Align portion of the right
blade extension assembly
not covered by blade
extension scraper plate
with backside of right side
of blade.
b. Secure using three
carriage bolts (710-0451)
and three hex flange
lock nuts (712-04063)
(including one carriage
bolt and one hex flange
lock nut removed in Step
1). See Figure 5.
5. Attach left blade extension assembly to left side of blade assembly with the
following steps:
a. Align portion of the left
blade extension assembly
not covered by blade
extension scraper plate
with backside of left side
of blade.
b. Secure using three
carriage bolts (710-0451)
and three hex flange
lock nuts (712-04063)
(including remaining
carriage bolt and hex
flange lock nut removed in
Step 1). See Figure 6.
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Blade Extension Kit Installation
  • Page 1 1

Cub Cadet 759-05742 User manual

Cub Cadet
Brand
Cub Cadet
Model
759-05742
Type
User manual

Cub Cadet 759-05742 allows you to enhance the capabilities of your mower with a blade extension kit. This kit includes two blade extension scraper plates, two blade extensions, eight carriage bolts, and eight hex flange lock nuts. With this kit, you can easily extend the width of your mower's blade, increasing its cutting capacity and making it more efficient for larger lawns or areas with dense growth. The blade extension scraper plates help to prevent grass and debris from building up on the underside of the blade, ensuring a clean cut and optimal performance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents