2. Contec
  3. FAN0412

Contec FAN0412 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Contec FAN0412 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the purpose of the FAN0412?
    What components are included with the FAN0412?
    What are the applicable connectors for the FAN0412?
    What precautions should be taken when handling the FAN0412?
    What is the manufacturer's stance on modifying the FAN0412?
    Is there a copyright associated with the FAN0412 user manual?
    What company manufactures and supports the FAN0412?
1
FAN0412
Fan 41x12
FAN0412 User’s Guide
CONTEC CO.,LTD.
Thank you for purchasing the FAN0412. The FAN0412 is FAN of ECH-PCI-CE-H2C for installation.
Please use it referring to the following matter.
Product Configuration List
- FAN…1
[FAN0412]
- Bracket…1
- This User’s Manual (this booklet) …1 -
Bracket fixed screw…2
- Fan fixed screw(M3X18 ) …4
Applicable connector on the connector side
Housing : 50802-8100 (mfd. by MOLEX) Equivalent types
Contact : 51191-0200 (mfd. by MOLEX) Equivalent types
Attaching the Fan
(1) Use screws to attach the FAN with a screw.
(2) Connector connecting to CN2.
(3) Fasten the Brackets with attached Brackets fixed screwes.
Figure 1. Attaching the Fan
(1)
(2)
(3)
FAN0412 User’s Guide
Copyright 2011 CONTEC CO., LTD. ALL RIGHTS RESERVED.
CONTEC CO., LTD. June 2011 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/ NA90000 (LYMY921)
Chinese http://www.contec.com.cn/ [06142011]
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
Bracket dimensions
Figure 2. Bracket dimensions
CAUTION
- Do not strike or bend this product.
Otherwise, this may malfunction, overheat, cause a failure or breakage.
- When plugging or unplugging the power cable, be sure to hold it by the plug itself.
- Do not insert or remove the connector while the power is turned on to the PC.
Failure to observe this precaution may cause malfunction, overheating.
- Insert or remove the cable straightly.
Otherwise, the part of connector may distort, cause a failure or breakage.
- No part of this document may be copied or reproduced in any form by any means without prior
written consent of CONTEC CO., LTD.
- All relevant issues have been considered in the preparation of this document.
Should you notice an omission or any questionable item in this document, please feel free to notify
CONTEC CO., LTD.
- The specifications of this product are subject to change without notice for enhancement and quality
improvement.
Even when using this product continuously, be sure to read the manual and understand the contents.
- Do not modify this product. CONTEC will bear no responsibility for any problems, etc., resulting
from modifying this product.
- Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for any results of using the product.
/