Fan motor replacement instructions
6282255A page 1
Before servicing or cleaning the unit, switch power off at the service panel and lock the service disconnecting
means to prevent power from being switched on accidentally. When the service disconnecting means cannot
be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
Remove the fan &
venturi assembly
from the cooler.
Unplug the fan motor
from the junction box
receptacle.
Mark a line across the
venturi and spigot to assist
with alignment when
refitting the assembly.
Invert the fan assembly to access the nuts and bolts retaining
the fan blade to the motor.
Remove the LEFT HAND thread bolt and wave washer and
retain for later use.
Remove the nuts and bolts (x2) and retain for later use.
LEFT HAND thread
bolt and wave washer