Hyundai e2-SPRAY E2S-7000 Operating instructions

Type
Operating instructions

This manual is also suitable for

Before using this product, please read "Directions for the safe use" and use it appropriately.
For the performance of the product, following images of the product might be slightly different from real ones.
Sterilizing Washer E2S-7000
Operating Manual
Regarding the electrolysis reducing water (function water) that you should know before using the product
Classification of the electrolysis reducing water
The range of nature-friendly function water that can be used safely
Strong acid
Acid
Alkali
Sterilizing water
Washing water
Strong Alkali
Sodium hypochlorite
legally valid concentration
volume of catalysis
Nacl (culinary salt)
safe sterilization
(fruit, vegetable)
general sterilization
(kitchen material)
strong sterilization
(dishcloth bleaching)
Functions of e2 SPRAY !!
Sterilizing effect for restaurantst
sterilizing small kitchenware,
sterilizing water towel to clean
the table,sterilizing the drains,
removing a bad smell
Electrolysis washing water
(detergent)
removing oil stain, washing grill plate and so on
(alternative chemical detergent)
(ion-lax)
Washing effect for restaurants
sterilizing kitchenware like knife,
cutting board, dishcloth, etc.,
washing and sterilizing
fruits and vegetables,
sterilizing the drains,
removing a bad smell
Electrolysis sterilizing water
Sterilizing effect for household goods
removing oil stain and old mold
(alternative detergent for washing machine)
Washing effect for household goods
Regarding the electrolysis reducing water (function water) that you should know before using the product
Examples of applying the electrolysis sterilizing
For the safe sterilization, the product is not working in case of using excessive catalysis.
Examples of applying the electrolysis
washing water (potassium carbonate)
classification classification
spray container
1-1.5g
1-2g
2-3g
safe sterilization
1g (1 spoon)
general sterilization
2g (2 spoons)
strong sterilization
3g (3 spoons)
sterilization of food
materials, such as
vegetables, fruits,
etc.
(decomposition of
agricultural chemicals)
sterilization of
dishcloth, knife,
cutting board,
and dishes
bleaching the
dishcloth, sterilizing
the drains, and so on
spray sterilization of
tables in restaurants
removing old stain
and oil stain on
the kitchen wall, etc.
washing laundry,
oil stain, frying pan,
grill plate, etc.
spray container
large container
large container
application application
volume of catalysis
(salt)
volume of catalysis
(potassium carbonate)
How to use - easy instructions for everyone - How to use
User guide
connect it to the
electric source
(The light of Muldori
(water-boy) charater is on.)
after pouring water up to the max.
line of the container (1-1.2L), add 1-3g of
catalysis (salt or potassium carbonate)
the container on the main controller.
The indicator of "stand-by mode" is on.
Press the "START" button.
connect it to the electric source
(The light of Muldori (water-boy) charater is on.)
According to the container,
the corresponding indicator is automatically on.
The operation indicator is flashing in
regular sequence.
After 1 or 2 min., only the center of the operation indicator is blinking with "beep" sound, indicating the completion of the manufacturing process.
(informing twice at 30 sec. intervals.)
Although you press the START button again without using the manufactured water (without replacing the container), the device does not operate.
(Only the container indicator is blinking.)
In case of too much catalysis or too little water, with "beep" sound, the operation indicator and the stand-by mode indicator are blinking fast,
indicating warning.
Depending on the volume of catalysis, the property of water produced varies. (safe sterilization 1g/ general sterilization 2g/ strong sterilization 3g)
classification
User guide
1. Fill the tap water (or filtered water, underground water) in the spray container or storage container up to the marked line,
and then place it on the main body. (At this time, fit the arrow on the container to the arrow on the main body.)
2. Put one to two measuring spoons (1-3g) of the designated catalysis or the catalysis used at home
(possible to use refined salt, but impossible to use burned salt and flavored salt).
3. Check the indicator on the main body, and press the button.
4. With "beep" sound, the water is automatically electrolyzed for about 1-2 minutes, and then sterilizing water is created.
(The operation indicator and the floodlight are on, and a lot of white bubbles rise.)
5. When the sterilizing water is created, it generates the completion signal of "beep-beep" sound twice at 30 second intervals.
1. Fill the tap water (or filtered water, underground water) in the spray container or storage container up to the marked line,
and then place it on the main body. (At this time, fit the arrow on the container to the arrow on the main body.)
2. Put one to two measuring spoons (1-3g) of the catalysis (potassium carbonate) provided by the manufacturer.
3. Check the indicator on the main body, and press the button.
4. With "beep" sound, the water is automatically electrolyzed for about 1-2 minutes, and then sterilizing water is created.
5. When the sterilizing water is created, it generates the completion signal of "beep-beep" sound twice at 30 second intervals.
Making sterilizing water (ion-lax)
Making washing water (detergent)
stand-by modestand-by mode
stand-by modestand-by mode
※ Advisable amount of catalysis with the measuring spoon depending on the container:
spray container (600mL): about one to two spoons (1-2g)
large storage container (1,200mL): about one to three spoons (1-3g)
The range of nature-friendly function water that can be used safely
Components and contents of the product
Large container
(large capacity)
spray container (spray)
controller main body
(container support)
electric source provider
the others, catalysis
container and spoon
-material: transparent or
semi-transparent PC
-capacity: 1,200ml
-separative design from the
main body
-including electrolysis part
-material: transparent or
semi-transparent PC
-capacity: 600ml
-including electrolysis part
-MICOM automatic control
-adoption of electrostatic
touch-switch
-function of detecting the
container automatically
-function of detecting the
catalysis volume automatically
-function of washing the
electrode automatically
-external adapter with
safe structure
-AC100-240V, 50-60Hz
SMPS method
-capacity of the catalysis container:
salt 80g, potassium carbonate 140g
-capacity of spoon: 1-1.2g
The name of each part and its product specification
mouth, opening
for pouring water
spray
container part
-capacity: 600mL, 1,200mL
electrolysis part
(electrode part)
electrode
connecting pin
front display
panel
electric control part electric source provider (SMPS)
(for both 100/240V)
lighting part
1. spray container indicator (capacity: 600mL)
2. storage container indicator (capacity: 1,200mL)
3. stand-by mode (blinking)
- Indicating stand-by mode
4. start button
5. waterdrop indicator (operation indicator)
- during the operation, diffusion of light
6. HYUNDAI logo
- indicating electric power status
Components and contents of the product
Product specifications
model name
rated voltage
rated power consumption
incoming voltage
durability of electrode
sterilizing power
manufacturing duration
of function water
used catalysis
controlling method
product size
materials
components
E2S-7000
AC 100-240V 50/60Hz
45W
DC 12V 3.5A
about 5 years
over 99.9%
1-2 min.
sterilization: salt(NaCL 80g), washing: potassium carbonate (K2Co3 140g)
MICOM automatic control
PC, ABS
spray container (600mL), large capacity storage container (1,200mL), controller main body,
electric source provider, catalysis container (100mL), spoon (1g)
Check points before calling your service provider
Problem
Check points
Solution
nothing on the LCD display
panel
Only the center of the operation
indicator (diffusion of waterdrop)
is blinking.
Why does "beep" sound keep
ringing?
I pressed the start button again,
but only the container indicator
is blinking without the operation.
Operation indicator, container
indicator, and stand-by indicator
are blinking fast with "beep-beep"
sound.
White bubbles does not rise
in the water!
Is the electric power connected
properly for AC adapter and behind
of the main body?
Did you press the "START" button?
Did you put catalysis?
Is it ringing for 1 min. at 30 sec.
intervals, after the completion of the
production?
Did you press the start button again
for the already-manufactured water?
Did you put too much catalysis?
Put the plug into the socket and connect the adapter to the main
body properly.
It's normal. When the electrolysis is completed, only the center of the
operation indicator (diffusion of waterdrop) is blinking.
Oxygen, hydrogen, and chlorine gas are created during the electrolysis.
Only when the catalysis reacts with the gases, white bubbles rise and
electrolysis water is created.
For the normal process, production using electrolysis is completed in
1 min. 30sec. after pressing the start button. The "beep" sound indicates
the completion of the production and rings twice at 30 sec. intervals.
Therefore, you just need to use it as sterilizing water or washing water
after the beep sound.
After the operation is completed and electrolysis water is made, the
device is not reoperating due to the safety reason.
(You can just use the water.)
Standard capacity for spray container (600mL) is one measuring spoon
(1g), and that for large container (1,200mL) is one and half measuring
spoon. If the capacity is exceeded, it is designed not to operate due to
the safety reason. When you put too much catalysis comparing with
water volume, please discard the water, fill new water, add proper
amount of catalysis, and then operate the device again.
Directions for the safe use
"Directions for the safe use" aim to guide users to use this product safely and appropriately, and protect them in advance from unexpected
danger or damage. Therefore, please keep the important directions for the safety by all means.
"Directions for the safe use" aim to guide users to use this product safely and appropriately, and protect them in advance from unexpected
danger or damage. Therefore, please keep the important directions for the safety by all means.
※ Expected directions for the use are classified with WARNING and CAUTION.
When the directions are violated, light injury or product damage is expected.
You must use the original adapter for the electric source, provided by the manufacturer.
[It can lead to fire or product damage.]
Do not put the plug into the socket with wet hands.
[It can lead to electric shock or fire.]
Do not bend nor pull the electric cord excessively.
[It can lead to fire due to electric shock or short circuit.]
Do not give severe shock to the product nor dissemble and repair it on your own authority.
[It can lead to product damage, fire, or electric shock.]
You must be careful so that water does not get into the controller main body.
[Particularly, since the electrode of the connecting part to the container is conductive, it can lead to electric shock or fire.]
Do not use this product in the area where there is risk for the product to get wet or moisturized, such as in the bath room,
the shower room, or outside.
[It can lead to product damage, fire, or electric shock.]
When the directions are violated, serious injury or death is expected.
WARNING
WARNING
CAUTION
Directions for the safe use
CAUTIONS
Produce it as much as necessary, and use it where
it is necessary.
Keep it away from children.
Do not keep the completed electrolysis water in the
refrigerator.(It can be confused with drink water.)
When creating strong sterilizing water, the complex
gas with oxygen, hydrogen, and chlorine is generated.
Therefore, do not breath the air in the container, when
transferring it into another container.
Never drink catalysis nor produced electrolysis water.
When producing electrolysis water in a closed place,
do not use fire around the outlet.
[It can lead to explosion because of the creation of
oxygen, hydrogen, and chlorine gas.]
Never spray toward eyes of human beings and use it
only for the sterilizing and washing purpose.
Do not move it during the operation.
[The leakage of electrolysis reducing water can lead to
electric shock or product damage.]
Unplug it from electric source after the use.
Do not expose this device directly to the sun.
[It can lead to fire or damage.]
Never put too much catalysis.
[Depending on the amount of catalysis, toxic
material can be created.]
(For the safe sterilization, the device automatically
stops its operation in case that excessive catalysis
is used.)
Use the designated catalysis only.
[It has influence on the durability of the product.]
Sterilizing and washing power of electrolysis water
can be reduced in case of long-term keeping.
After the sterilizing process with more than general
sterilization, rinsing process must be applied.
Electrolysis sterilizing water should be used only for
sterilization.
Electrolysis washing water should be used only as
washing water.
This product can be used with electric source of
AC 100-240V, 50/60Hz.
Guarantee
This product is guaranteed as follows.
product name
Model name
place of
purchase
name of
customer
address of
customer
term of
guarantee
date of
purchase
telephone
number
telephone
number
e-mail
for 1 year after the date of purchase
year, month, date
1. This product was made through a series of thorough and strict inspection processes.
2. In case that our product has functional defects during the term of quality guarantee and that the defects are caused by normal
use, our company will repair them without charge, and if it is not possible to repair the product, it will be exchanged with new one.
This guarantee can not be applied in following cases, and consequently the product can be repaired with charge.
1) When the malfunction or damage of the product occurred after the term of guarantee was expired
2) When the customer caused the damage on purpose or by mistake
3) When other repair center caused the damage
4) When the damage was caused by malfunction of the electric source or connector (regardless of the term of guarantee)
5) When the durability of the part itself is over (only when it is included in the operating manual)
6) When a natural disaster caused the damage or defect of the product
3. If you want our company to repair the product, please contact our customer service center.
This product will be exchanged, repaired, or paid back in case of justifiable customer damage, based on the compensation
regulations of customer damage notified by Ministry of Finance and Economy.
The cases not written in this guarantee will follow the compensation regulations of customer damage item by item.
WacorTec.Co.,Ltd.
684 - 49, Gongreung - Dong, Nowon - Ku, Seoul , Korea
http://www.hyundaiwater.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Hyundai e2-SPRAY E2S-7000 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI