Fujitsu W530 User manual

System

Operating Manual

CELSIUS W530 / W530power

Thank you for buying an inno

vative product from Fujitsu.

Latest information abo

ut our products, useful tips, upda tes etc. is available

on our website: "

http:

//www.fujitsu.com/fts/"

You can ﬁnd driver upda

tes at: "

http://support.ts.fujitsu.com/download"

Should you have any te

chnical questions, please contact:

• our Hotline/Service

Desk (see Service D esk list or from the Internet at:

"

http://support.t

s.fujitsu.com/c ontact/servicedesk")

• Your sales partner

• Your sales ofﬁce

We hope you enjoy using your new Fujitsu system!

Published by / Contact address in the EU

Fujitsu Te

chnology Solutions GmbH

Mies-van-der-Rohe-Straße 8

80807 Munich, Germany

"

http://

www.fujitsu.com/fts/"

Copyright

©Fujits

Publication Date

06/2013

Order No.: A26361-K1445-Z320-1-7619, edition 1

CELSIUS W530 / W530power

Operating Manual

Your CELSIUS... 5

Ports and operating elements 7

Important notes 9

Getting started 13

Operation 23

Troubleshooting and tips 30

System expansions 34

Technical data 57

Index 58

Remarks

Information on the product d e scription meets the design speciﬁcations of Fujitsu and

is provided for comparison purposes. Several factors may cause the actua l results to

differ. Technical data is subject to change without prior notiﬁca tion. Fujitsu rejects any

responsibility with r egard to technical or editorial mistakes or o m issions.

Trad em arks

Fujitsu, the Fujitsu logo an d CELSIUS are registered trademarks of F ujitsu Limited or its

subsidiaries in the United S ta tes of America and other countries.

PS/2 is a registered trademark of International Business Machines, Inc.

Pentium is a registered trademark of Intel Corporation, USA.

Kensington and MicroSaver are registered trademarks of ACCO Brands.

Microsoft and Window s are trademarks or registered trademarks of the Microsoft

Corporation in the United Sta tes and/or other countries.

All other trademarks speciﬁed here are the property of their respective owners.

Copyright

No part of this publication may be copied, reproduced or translated without

the prior written consent of Fujitsu.

No part of this publication may be saved or transferred by any electronic means

without the written approval of Fujitsu.

Contents

YourCELSIUS... ....................................................................... 5

Validityof the Reference Manual ......................................................... 5

Notational conventions .................................................................. 6

Ports and operating elemen

ts .........................................................

7

Front ................................................................................... 7

Rear ................................................................................... 8

Important notes ........................................................................ 9

Safetyinformation ....................................................................... 9

Transportingthedevice .................................................................. 9

Cleaning thedevice ..................................................................... 10

Energy saving,disposaland recycling .................................................... 10

CEmarking ............................................................................ 11

FCCComplianceStatement ............................................................. 12

FCCClass BComplianceStatement .................................................. 12

Getting started ......................................................................... 13

Unpacking and che

ckingthe delivery .....................................................

13

Steps for initial

setup ....................................................................

13

Setting up the de

vice ....................................................................

14

Connecting the m

achineto themains .....................................................

14

Connecting ext

ernaldevices .............................................................

15

Cable c onnect

ing ....................................................................

15

Disconnectin

gcables ................................................................

15

Ports on the de

vice ..................................................................

16

Connecting a

monitor ................................................................

17

Connecting t

hemouse ...............................................................

18

Connecting t

he keyboard . ...........................................................

19

Connecting

external devices to the parallel (optional) or serial port . .....................

20

Connecting

externaldevicesto theUSBports .........................................

20

Switching

on for the ﬁrst time:installing thesoftware .......................................

21

Switchin g

onmonitoranddevice .....................................................

22

Installi

ngthesoftware ...............................................................

22

Operation .............................................................................. 23

Indicatorsonthedevice ................................................................. 23

Switchthe deviceon .................................................................... 23

Switching offthedevice ................................................................. 24

Keyboard ............................................................................... 24

Important keys and keyboard shortcuts . . . . ............................................ 25

Settingsin BIOSSetup .................................................................. 26

Property an d data protection . . ........................................................... 27

Anti-theft protection and lead-sealing . . . . . . ............................................ 27

Mechanical casing lock (optional) . . ................................................... 28

BIOSsetup securityfunctions ........................................................ 28

Accessauthorisationvia SmartCard .................................................. 29

Operating the Sma rtCard reader (optional) ............................................ 29

Tro

ubleshooting andtips ..............................................................

30

Hel

pifproblemsoccur ...................................................................

30

Tr

oubleshooting . . . ......................................................................

30

Fujitsu 3

Contents

Power-on indicatorremains unlitafteryouhave switchedon yourdevice ................. 30

The device c anno t be switched off with the ON/OFF switch . . . .......................... 31

Monitorremainsblank ............................................................... 31

Nomousepointer displayed onthescreen ............................................ 32

Time and/or date is not correct . . . . . . ................................................. 32

Errormessageson thescreen ........................................................ 32

Installingnewsoftware .................................................................. 32

Restoring thehard diskcontents ......................................................... 33

Tips .................................................................................... 33

Systemexpansions .................................................................... 34

Information about boards ................................................................ 35

Opening the casing . . ................................................................... 36

Closingthe casing ...................................................................... 37

Overview ofdrivebays anddrives inyourdevice .......................................... 37

Installing and removing the accessible 5

1

/

4

inchdrive ...................................... 38

Fitting th e drive cover for the 5

1

/

4

inchdrive ........................................... 38

Installingan accessibledrive ......................................................... 39

Removing anaccessible drive ........................................................ 40

Installing/removing the SmartCard reader and/or WLAN module (optional, 3½-Z oll) ........... 41

Installing/removing a 3½" reader in a 3½" bay (optional, SmartCard or MultiCard) . ........... 41

Removing t he module holder . ........................................................ 42

Screwing theWLAN moduleonto themodule holder ................................... 42

Screwing the SmartCard reader onto the module holder . . .............................. 43

Installing the m odule holder with SmartCard reader and/or W LAN module . ............... 43

Removing t he module holder with SmartCard reader and/or WLAN module . . . ........... 44

Removing the S martC a rd reader from the module holder . .............................. 45

Removing t he WLAN module from the module holder .................................. 45

Removing and installing the memory card reader (optional, 3½ inch, MultiCard) . . . ........... 46

Installing the m emory card reader . . . ................................................. 46

Removing t he memory card reader . . ................................................. 47

Installingandremoving theharddiskdrive ................................................ 48

Installinga harddiskdrive ........................................................... 49

Removing thehard diskdrive ........................................................ 50

Installing and removing a board . . ........................................................ 51

Installing a board . . . . ................................................................ 51

Removing a board . . . ................................................................ 53

Replacing theprocessor ................................................................. 54

Installingandremoving processorcoolingdevices ......................................... 54

Removing t he heat sink . . ............................................................ 54

Installing the heat sink . . . ............................................................ 54

Mainboard expansions . . ................................................................ 55

Upgrading mainmemory ............................................................. 55

Replacing thelithium battery ......................................................... 56

Technicaldata ......................................................................... 57

Index .................................................................................. 58

4 Fujitsu

Your CELSIUS...

Overview

... is available with various conﬁguration levels which differ in terms of hardware and software

equipment. You can install accessible drives (e.g. DVD drives) and other modules.

This manual tells yo u how to start using your device and how to operate it in daily u se.

This manual applies for all c onﬁguration levels. Depending on the chosen conﬁguration

level, some of the hardware components described may not be ava ilable on y our PC.

Please also read the notes about your operating system.

Depending on the conﬁguration selected, the operating system is preinsta lled

on your hard disk (e.g. Windows 7).

Further information on this device is also provided:

• in the "Quick Start Guide" po ster

• in the "Safety/regul

ations" manual

• in the "Warranty" manu al

• in the op erating ma

nual for the monitor

• in the manual for the mainboard

• in the documentat

ion for your operating system

• in the informatio n ﬁles (e.g. *.PD F, *.HTML, *.DOC, *.CHM, *.TXT, *.HLP)

Some of the manuals listed can be found in electronic form on the "Drivers & Utilities" DVD.

You can access and view the required information using the Acrobat Reader program,

which is also included on the DVD. If necessary, you can also print out the manuals.

ValidityoftheReferenceManual

This Reference Manual is valid for the following systems:

• CELSIUS W530

• CELSIUS W530power

Fujitsu 5

Your CELSIUS...

Notational conventions

Pay particular attention to text marked with this symbol. Fa ilure to observe

these warnings could p ose a risk to health, damage the device or lead

to loss of data. The warranty will be invalidated if the device becomes

defective throu gh failure to observe these warnings.

Indicates important informa

tion for the proper use of the device.

►

Indicates an activity that must be performed



Indicates a result

This font

indicates data entered

using the keyboard in a pro gram d ialogue or at

the command line, e .g.

your password (Name123) or a command used to

start a program (star

t.exe)

This font

indicates information that is displayed on the screen by a program, e.g.:

Installation is complete.

This font

indicates

• terms and texts used in a software interface, e.g.: Click on Save

• names of programs or ﬁles, e.g. Windows or setup.exe.

"This font"

indicates

• cross-references to another section, e.g. "Safety information"

• cross-references to an external s ource, e.g. a web address: For more

information, go to "

http://www.fujitsu.com/fts"

• Names of CDs, DVDs and titles or designations for other materials,

e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" m anua l

Key

indicates a key on the keyboard, e.g:

F10

This font

indicates terms and texts that are emphasised or highlighted, e.g.: Do

not switch off th e d evice

6 Fujitsu

Ports a nd operating elem en ts

Ports and operating elements

Ports

This chapter presents the individual hardw are components of your device. This will provide

you with an overview of the ports and operating elements on the device. Please familiarise

yourself with these components before starting to work with your device.

Front

1

2

3

4

5

6

7

9

8

1 = Module bays for 5

1

/

4

" dri ves

2 = Module bays for 3

1

/

2

" dri ves

3 = ON/OFF switch

4 = Headphone port

5 = Microphone jack

6 = USB 2.0 ports

7 = USB 3.0 ports

8 = Hard disk front panel (removable)

9 = Casing lock (optional)

Fujitsu 7

Ports and operating elements

Rear

1

2

3

1=Alternatingv

oltage socket (AC IN)

2 = Ports for external devices

(device-dependent)

3 = Slot covers

8 Fujitsu

Important notes

ImportantnotesNotes

In this chapter you will ﬁnd information regarding safety which it is essential to

take note of when working with your device.

Safety information

SafetyinformationNote

Please note the informat

ion provided in the "Safety/regulations" manual

and in the following safe

ty notes.

When installing and ope

rating the device, please observe the notes on

environmental conditi

ons in Chapter "

Technical data", Page 57 as well as

the instructions in Cha

pter "

Getting s tarted", P age 13.

When setting up the dev

ice, make sure there is clearance all around it so that

thecasingreceives

enough ventilation. In order to avoid overheating, do not

cover the ventilati

on are as of the mon itor or the device.

You must only opera

te the device if the rated voltage used by the

device is set to the

local mains voltage.

You must remove the

power plug from the pow er socket so that the

mains voltage is c

ompletely disconnected.

Operate the devic

e only with the casing closed.

Replace the lit

hium battery o n the mainboard in accordance with the instructions

in "

Replac ing t

he lithium battery", Page 56.

Caution, comp

onents in the system can get very hot.

The activitie

s described in these instructions must always be

performed wi

th the greatest care.

Repairs to th

e device must only be performed by qualiﬁed technicians.

Incorrect re

pairs could put the user at great risk or cause serious dam age

to the equ ip

ment (electric shock, risk of ﬁre).

Transport

ing the device

Device,Tr anspo r

tation

Retransp

ortation

Transport all parts separa tely in their original packaging or in a packaging which

protects them from knocks and jolts, t o the new site.

Do not unpack them until all transportation manoeuvres are completed.

If the device is brought from a cold environment into the room where it will be

used, condensation may occur. To avoid dam aging the device, wait until it has

reached room temperature and is abso lutely dry before initial startup.

Fujitsu 9

Important notes

Cleaning the device

Device,Tran sporta tionRetransportationSystemunit,see Device

Turn off all power and equipment switches and disconnect the pow er

plug from the mains outlet.

Do not clean any interior pa rts yourself, leave this job to a service technician.

Do not use any cleaning agents that contain abrasives or may corrod e

plastic (alcohol, thinner or acetone).

Never clean the device with water! Water enterin g into th e device could

present a serious risk to users (e.g. electric shock).

Ensure that no liquid enters the system.

The surface can be clea

ned with a dry cloth. If particularly dirty, use a cloth that has been

moistened in mild dome

stic detergent and then carefully wrung out.

Use disinfectant wi

pes to clean the keyboard and the mouse.

Energy saving, disposal and recycling

DisposalEnergysavingR ecyclingDrivers&UtilitiesDVDUserDocumentationDVD

You can ﬁnd information on these subjects on the "Drivers & Utilities" DVD or on our

website ("

http://www.fujitsu.com/fts/about/fts/ environment-care/").

10 Fujitsu

Important notes

CE marking

CEmarkingCEmarkingNotesElectromagneticcompatibilityLowvoltagedi rective

The shipped version of this device complies with the requirements of European U nion

directives 2004/108/EC "Electromagnetic compatibility", 2006/95/EC "Low voltage directive" and

2009/125/EC "Ecodesign".

CE marking for devices with radio component

This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament

and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment

and mutual recognition of conformity.

The CE marking valid for your device can be found on the device label.

Explanation: CE nnnn (!) ; nnnn deﬁnes the type of CE marking and the exclamation mark

indicates a device with radio components.

You can ﬁnd more information and declarations of c onfo rmity on the Internet at:

"

http://globalsp.t s.fujitsu.com/sites/cert iﬁcates".

This equipment can be used in the following countries:

Belgium Bulgaria Denmark

Germany

Estonia Finland France

Greece

UK Ireland Iceland Italy

Croatia

Latvia Liechtenstein Lithuania

Luxembourg Malta Netherlands Norway

Austria Poland Portugal Rumania

Sweden Switzerland Slovakia Slovenia

Spain Czech Republic

Hungary

Cyprus

Contact the corresponding government ofﬁce in the respective country for cu rrent information on

possible operating restrictions. If your country is not included in the list, then please contact

the corresponding supervisory authority as to whether the use of this product is permitted in

your country.

Fujitsu 11

Important notes

FCC Compliance Statement

If th e device complies with the FCC regulations, the FCC sign can be found on the type rating plate.

FCC Class B Compliance State

ment

DOC ( INDU STRY CANA DA) NOTICES

Notice to Users of Radios and Television:

This class B digital a pparat us complies with Canadian I CES-003.

The following statement applies to the pro duct s covered in this manual, unless otherwise speciﬁed

herein. The statement for other products will appear in the accompanying documentation.

NOTE:

This equipment has been tested and found to comply with the limits for a "Class B" digital

device, pursuant to Part 15 of the FCC rules and meets all require ments of th e Canadian

Interference-Causing E quipment Standard ICES-003 for digital app aratus. These limits are

designed to provide reasonable protection against harmful interference in a residen tial installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in strict accordance with the instructions, may cause harmful interference to radio

communications. However, there is no gu arantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to r adio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the s

eparation between equipment and the rece iver.

• Connect the equipment into an outlet on a circuit different from th at to

which the receiver is connected.

• Consult the d

ealer or an experienced radio/TV technician for help.

Fujitsu is not responsible for any radio or tel evision interference caused by unauthorized

modiﬁcations of this equipment or the substitution or attachment of connecting cables and

equipment other than those speciﬁed by Fujitsu. The c orrection of interferences caused by such

unauthorized mod iﬁ cation, substitution or attachment will be the responsibility of the user.

The use of shielded I/O cables is required when connecting this equipment to any and all optional

peripheral or host devices. Failure to do so may violate FCC and ICES rules.

12 Fujitsu

Getting started

Gettingstarted

Please observe the safety information in the "Important notes", Page 9 chapter.

Unpacking and checking the delivery

It is recommend ed not to throw away the original packaging material! It may be

required for reshipment at some later date.

PackagingContentsofd eliveryPackaging,

► Unpack all the individual parts.

► Check the conten ts of the package for any visible damage caused during transpo rt.

► Check whether the delivery conforms to th e details in the delivery note.

► Should you discover that the delivery does not correspond to the delivery

note, notify your local sales outlet immediately.

Steps for initial setup

Preparingforﬁ rstuse, overviewPreparingforuse,

Only a few steps are necessary to put your new device into operation for the ﬁrst tim e:

• Select a location for device and set up device

• Connect external devices such as mouse, keyboard and monitor

• Check the voltage at the mains outlet and connect the device to an electrical outlet

• Switch the device on

You will learn more about the individual steps in the following sections.

External devices

If you have received other external devices in addition to your own device (e.g.

a printer), do not connect these until after the initial installation. The following

sections describe how to connect these external devices.

Drives and boards

If you have received drives or boards with your device, please do not insta ll

them until after ﬁrst-time setup. H ow to install drives and boards is described

in the "

System expansions", Page 34 chapter.

Fujitsu 13

Getting started

Setting up the device

WorkstationErgonomicDevice

When installing your device, please read the recommendations and safety

notes in the "Safety/regulations" manual.

We recommend that you place your device on a surface which is not slippery. In

view of the man y different ﬁnishes and varnishes used on furniture, it is possible

that the rubber feet w ill mark the surface they stand on.

Depending on the location of your device, bothersome vibrations and no ises may

occur. To pre vent this, a distance of at least 10 mm / 0.39" should be maintained

from other devices on casing sides without ventilation surfaces.

In order to avoid overheating, do not cover the ventilation areas

of the monitor or the device.

A minimu m distance of 200 mm / 7.87" from the device must be

observed for ventilation areas.

Do not stack several devices on top of each other.

Do not expose the device to extreme ambient conditions (see "

Technical data", Page 57,

section "Ambient conditions"). Protect the device against du st, humidity and heat.

Connecting the machine to the mains

Mainsadapter,

2

1

► Connect the mains cable to t he machine (1).

► Plug th

e mains plug into a three -pin socket (2).

After

the mains power cable has been atta ched, the device automatically switches

itsel

f on for a few seconds to run a system test, then switches off again.

14 Fujitsu

Getting started

Connecting external devices

Read the documentation on the external device before connecting it.

With the exception of USB devices, always remove all power plugs

before con necting external devices!

Do not connect or disconnect cables d uring a thunderstorm.

Always take hold of the actual plug when discon nect ing a cable . Never pull the cable!

Connect and disconnect the cables in the order described below.

Cable connecting

► Switch off all affected device s.

CordCable

► Remove power plugs from the mains outlets for all devices.

► Plug all cables into the device and peripherals. Please make sure that you always

observe the safety notes provided in "

Important notes", Page 9.

► Plug all data communication cables into the sockets provided for the data

/ telecommunication networks.

► Plug all power cables into the grounded mains outlets.

USB devices are hot-pluggable. This means you can connect and disconnect

USB cables while your device is switched on.

Additional information c an be found in "

Connecting external devices to the USB

ports", Page 20 and in the documentation for the USB devices.

Disconnecting cables

► Switch off al

l affected devices.

Cable

► Remove power plugs from the mains outlets for all devices.

► Unplug a ll

data communication ca bles from the utility sockets.

► Unplug all cables from the d evice and peripherals.

Fujitsu 15

Getting started

Ports on the device

PortsExternaldevicesDevice

The ports are located on the front and back of the device. Not all ports are necessarily present on

your device. The standard ports are marked with the symbols shown below (or similar). Detailed

information on the location of the ports is provided in the manual for the mainboard.

PS/2 keyboard port

Keyboa rdport

Parallel port/printer (optional)

ParallelportPrinter

1

Serial port 1

Serialport

2

Serial port 2

Serialport

VGA monitor port

Monitorport

Microphone port

Microphone jack

Headphones

Audio input (Line in)

AudioinputLinein

Audio output (Line out)

AudiooutputLineout

PS/2 mouse port

MouseportPS/2mouseport

USB 2.0 - Universal Serial Bus

UniversalSerialBus

LAN

LAN port

LANport

USB 3.0 - Universal Serial Bus

UniversalSerialBus

SCSI connection

DVI-I monitor port DP Displ a yP ort

Some of the connected devices req uire special software (e.g. drivers) (refer to the

documentation for the connected device and operating system).

16 Fujitsu

Page is loading ...

Fujitsu W530 User manual

This manual is also suitable for

Fujitsu W530 User manual

Related papers

Other documents