BYD AUTO F0 Owner’s Manual
14
3. Take the used battery.
4. Place a new battery in with the anode
(+) facing upward.
5. Close the remote controller firm and
screw up the screw.
Notice
Make sure the anode and cathode
of the remote controller battery are
correctly positioned.
Do not replace the battery with
wet hands; water may lead to
unexpected rustiness.
Do not touch or move any part in
the remote controller; otherwise, correct
operation may be affected.
When positioning a new battery in
the remote controller, pay attention not
to bend the electrodes and remove dust
and oil in the remote controller box.
After battery replacement, check whether
the remote controller can work normally. If
it still cannot work, please contact
authorized service stations of BYD.
Notice
Without permission, do not
alter the emission frequency, increase
the emission power (by including but
not limited to adding emission
frequency amplifiers), equip external
antennas or use other emission
antennas.
Use of the remote controller
should not produce any harmful
interference to any legal wireless
communication services; stop use of
the remote controller immediately if
any interference is found and do not
use it until measures have been taken
and the interference has been
eliminated.
Do not use the remote controller
near aircrafts or airports.