Gigabyte MA785GMT-UD2H Owner's manual

GA-MA785GPMT-UD2H/

GA-MA785GMT-UD2H/

GA-MA785GMT-US2H

AM3 socket motherboard for

AMD Phenom

™

II processor/ AMD Athlon

™

II processor

User's Manual

Rev. 1101

12ME-MA785T2-1101R

Motherboard

GA-MA785GPMT-UD2H/

GA-MA785GMT-UD2H/

GA-MA785GMT-US2H

July 16, 2009

Motherboard

GA-MA785GPMT-UD2H/GA-MA785GMT-UD2H/GA-MA785GMT-US2H

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE with-

out prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentations:



For quick set-up of the product, read the Quick Installation Guide included with the product.



For detailed product information, carefully read the User's Manual.



For instructions on how to use GIGABYTE's unique features, read or download the information

on/from the Support&Downloads\Motherboard\Technology Guide page on our website.

For product-related information, check on our website at:

http://www.gigabyte.com.tw

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"

means the revision of the motherboard is 1.0. Check your motherboard revision before updating

motherboard BIOS, drivers, or when looking for technical information.

Example:

- 4 -

Table of Contents

Box Contents ...................................................................................................................6

Optional Items .................................................................................................................6

GA-MA785GPMT-UD2H/GA-MA785GMT-UD2H(US2H) ................................................7

Motherboard Layout .......................................................................................................7

Block Diagram .................................................................................................................8

Chapter 1 Hardware Installation .....................................................................................9

1-1 Installation Precautions .................................................................................... 9

1-2 Product Specications .................................................................................... 10

1-3 Installing the CPU and CPU Cooler ............................................................... 13

1-3-1 Installing the CPU ...................................................................................................13

1-3-2 Installing the CPU Cooler .......................................................................................15

1-4 Installing the Memory ..................................................................................... 16

1-4-1 Dual Channel Memory Conguration .....................................................................16

1-4-2 Installing a Memory ...............................................................................................17

1-5 Installing an Expansion Card ......................................................................... 18

1-6 Setup of the ATI Hybrid CrossFireX

™

Conguration ....................................... 19

1-7 Back Panel Connectors .................................................................................. 20

1-8 Internal Connectors ........................................................................................ 23

Chapter 2 BIOS Setup ..................................................................................................35

2-1 Startup Screen ............................................................................................... 36

2-2 The Main Menu .............................................................................................. 37

2-3 MB Intelligent Tweaker(M.I.T.) ........................................................................ 39

2-4 Standard CMOS Features .............................................................................. 45

2-5 Advanced BIOS Features .............................................................................. 47

2-6 Integrated Peripherals .................................................................................... 50

2-7 Power Management Setup ............................................................................. 53

2-8 PnP/PCI Congurations ................................................................................. 55

2-9 PC Health Status ............................................................................................ 56

2-10 Load Fail-Safe Defaults .................................................................................. 58

2-11 Load Optimized Defaults ................................................................................ 58

2-12 Set Supervisor/User Password ...................................................................... 59

2-13 Save & Exit Setup .......................................................................................... 60

2-14 Exit Without Saving ........................................................................................ 60

- 5 -

Chapter 3 Drivers Installation ........................................................................................61

3-1 Installing Chipset Drivers ............................................................................... 61

3-2 Application Software ...................................................................................... 62

3-3 Technical Manuals .......................................................................................... 62

3-4 Contact ........................................................................................................... 63

3-5 System ........................................................................................................... 63

3-6 Download Center ........................................................................................... 64

Chapter 4 Unique Features ...........................................................................................65

4-1 Xpress Recovery2 .......................................................................................... 65

4-2 BIOS Update Utilities ..................................................................................... 68

4-2-1 Updating the BIOS with the Q-Flash Utility .............................................................68

4-2-2 Updating the BIOS with the @BIOS Utility .............................................................71

4-3 EasyTune 6 .................................................................................................... 72

4-4 Easy Energy Saver ........................................................................................ 73

4-5 Q-Share .......................................................................................................... 75

4-6 Time Repair .................................................................................................... 76

Chapter 5 Appendix ......................................................................................................77

5-1 Conguring SATA Hard Drive(s) ..................................................................... 77

5-1-1 Conguring the Onboard SATA Controller ............................................................77

5-1-2 Making a SATA RAID/AHCI Driver Diskette ............................................................83

5-1-3 Installing the SATA RAID/AHCI Driver and Operating System ...............................84

5-2 Conguring Audio Input and Output ............................................................... 88

5-2-1 Conguring 2/4/5.1/7.1-Channel Audio ...................................................................88

5-2-2 Conguring S/PDIF In/Out ......................................................................................90

5-2-3 Enabling the Dolby Home Theater Function

jk

...................................................92

5-2-4 Conguring Microphone Recording ........................................................................93

5-2-5 Using the Sound Recorder .....................................................................................95

5-3 Troubleshooting.............................................................................................. 96

5-3-1 Frequently Asked Questions ..................................................................................96

5-3-2 Troubleshooting Procedure ....................................................................................97

5-4 Regulatory Statements ................................................................................... 99

j

Only for GA-MA785GPMT-UD2H.

k

Only for GA-MA785GMT-UD2H.

- 6 -

Box Contents

GA-MA785GPMT-UD2H, GA-MA785GMT-UD2H,

or GA-MA785GMT-US2H motherboard

Motherboard driver disk

User's Manual

Quick Installation Guide

One IDE cable

Two SATA 3Gb/s cables

I/O Shield

Optional Items

Floppy disk drive cable (Part No. 12CF1-1FD001-7*R)

2-port USB 2.0 bracket (Part No. 12CR1-1UB030-5*R)

2-port IEEE 1394a bracket (Part No. 12CF1-1IE008-0*R)

2-port SATA power cable (Part No. 12CF1-2SERPW-0*R)

S/PDIF In and Out cable (Part No. 12CR1-1SPINO-1*R)

COM port cable (Part No. 12CF1-1CM001-3*R)

LPT port cable (Part No. 12CF1-1LP001-0*R)

• The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

• The motherboard image is for reference only.

- 7 -

GA-MA785GPMT-UD2H/GA-MA785GMT-UD2H(US2H)

Motherboard Layout

"*" The GA-MA785GPMT-UD2H/GA-MA785GMT-UD2H adopts All-Solid Capacitor design.

j

Only for GA-MA785GPMT-UD2H.

(Note) Use this port to connect a PS/2 keyboard or PS/2 mouse.

KB

(Note)

_USB

CPU_FAN

ATX

GA-MA785GPMT-UD2H/

GA-MA785GMT-UD2H/

GA-MA785GMT-US2H

CD_IN

F_AUDIO

AUDIO

SPDIF_IO

PCIEX1

IDE

PWR_LED

DDR3_1

DDR3_2

ATX_12V_2X4

AMD 785G

AMD SB710

SATA2_3

SATA2_0

SATA2_4

SATA2_2

SATA2_1

PCI1

DVI

VGA

CODEC

CI

OPTICAL

HDMI

USB

LAN

PCI2

CLR_CMOS

BATTERY

M_BIOS

FDD

F_PANEL

COM

RTL8111C

B_BIOS

IT8718

TSB43AB23

SYS_FAN

PCIEX16

ESATA

1394

USB

NB_FAN

F_1394_1

F_USB1

F_USB2

F_USB3

SidePort Memory

j

DDR3_3

DDR3_4

LPT

Socket AM3

- 8 -

Block Diagram

AM3 CPU

Hyper Transport 3.0

AMD 785G

PCIe CLK

(100 MHz)

PCI Express Bus

CPU CLK+/- (200 MHz)

1 PCI Express x1

RTL8111C

DDR3 1666 (O.C.)/1333/1066 MHz

PCIe CLK

(100 MHz)

1 PCI Express x16

LAN

RJ45

x1

GFX CLK (100 MHz)

D-Sub

DVI-D or HDMI

(Note)

PCI Express x16

j

Only for GA-MA785GPMT-UD2H.

(Note) Simultaneous output for DVI-D and HDMI is not supported.

Dual Channel Memory

DDR3 SidePort

Memory

j

PS/2 KB or Mouse

AMD SB710

IT8718

Floppy

ATA-133/100/66/33 IDE Channel

COM Port

12 USB Ports

LPC

Bus

6 SATA 3Gb/s

LPT Port

Center/Subwoofer Speaker Out

Line Out

MIC

Line In

S/PDIF In

S/ PDIF Out

Side Speaker Out

Surround Speaker Out

CODEC

2 PCI

PCI Bus

PCI CLK

(33 MHz)

TSB43AB23

2 IEEE 1394a

Dual BIOS

- 9 - Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can

become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read

the user's manual and follow these procedures:

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard,

make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic com-

ponents such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keep your hands dry and rst touch a metal object to eliminate static electricity.

•

Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power sup-

ply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your hard-

ware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface

.

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to sys-

tem components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

Chapter 1 Hardware Installation

Hardware Installation - 10 -

1-2 Product Specications

CPU



Support for AM3 processors:

AMD Phenom

™

II processor/ AMD Athlon

™

II processor

(Go to GIGABYTE's website for the latest CPU support list.)

Hyper Transport Bus



5200 MT/s

Chipset



 North Bridge: AMD 785G





 South Bridge: AMD SB710

Memory



4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory

(Note 1)



Dual channel memory architecture



Support for DDR3 1666 (O.C.)/1333/1066 MHz memory modules





 (Go to GIGABYTE's website for the latest memory support list.)

Intergrated Memory



128MB DDR3 SidePort memory

Onboard Graphics



Integrated in the North Bridge:

- 1 x D-Sub port

- 1 x DVI-D port

(Note 2) (Note 3)

- 1 x HDMI port

(Note 3)

Audio

   

Realtek ALC889A codec



High Denition Audio



2/4/5.1/7.1-channel



Support for Dolby

®

Home Theater

jk

    

Support for S/PDIF In/Out



Support for CD In

LAN



RTL8111C chip (10/100/1000 Mbit)

Expansion Slots



1 x PCI Express x16 slot, running at x16

(The PCI Express x16 slot conforms to PCI Express 2.0 standard.)



1 x PCI Express x1 slot



2 x PCI slots

Storage Interface



South Bridge:

- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices

- 5 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3,

SATA2_4) supporting up to 5 SATA 3Gb/s devices

- 1 x eSATA 3Gb/s port on the back panel supporting up to 1 SATA 3Gb/s

device

- Support for SATA RAID 0, RAID 1, RAID 10, and JBOD



iTE IT8718 chip:

- 1 x oppy disk drive connector supporting up to 1 oppy disk drive

"*" The GA-MA785GPMT-UD2H/GA-MA785GMT-UD2H adopts All-Solid Capacitor design.

j

Only for GA-MA785GPMT-UD2H.

k

Only for GA-MA785GMT-UD2H.

- 11 - Hardware Installation

USB



Integrated in the South Bridge



Up to 12 USB 2.0/1.1 ports (6 on the back panel, 6 via the USB brackets

connected to the internal USB headers)

IEEE 1394



T.I. TSB43AB23 chip



Up to 2 IEEE 1394a ports (1 on the back panel, 1 via the IEEE 1394a bracket

connected to the internal IEEE 1394a header)

Internal



1 x 24-pin ATX main power connector

Connectors



1 x 8-pin ATX 12V power connector



1 x oppy disk drive connector



1 x IDE connector



5 x SATA 3Gb/s connectors



1 x CPU fan header



1 x system fan header



1 x North Bridge fan header



1 x front panel header



1 x front panel audio header



1 x CD In connector



1 x S/PDIF In/Out header



3 x USB 2.0/1.1 headers



1 x IEEE 1394a header



1 x serial port header



1 x parallel port header



1 x power LED header



1 x chassis intrusion header



1 x clearing CMOS jumper

Back Panel



1 x PS/2 keyboard port or PS/2 mouse port

Connectors



1 x D-Sub port



1 x DVI-D port

(Note 2) (Note 3)



1 x HDMI port

(Note 3)



1 x optical S/PDIF Out connector



1 x eSATA 3Gb/s port



1 x IEEE 1394a port



6 x USB 2.0/1.1 ports



1 x RJ-45 port



6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/

Side Speaker Out/Line In/Line Out/Microphone)

I/O Controller



iTE IT8718 chip

Hardware Monitor



System voltage detection



CPU/System temperature detection



CPU/System fan speed detection



CPU overheating warning



CPU/System/Power fan fail warning



CPU/System fan speed control

(Note 4)

Hardware Installation - 12 -

(Note 1) Due to Windows Vista/XP 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than 4 GB.

(Note 2) The DVI-D port does not support D-Sub connection by adapter.

(Note 3) Simultaneous output for DVI-D and HDMI is not supported.

(Note 4) Whether the CPU/system fan speed control function is supported will depend on the CPU/system

cooler you install.

(Note 5) Available functions in EasyTune may differ by motherboard model.

BIOS



2 x 8 Mbit ash



Use of licensed AWARD BIOS



Support for DualBIOS

™



PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

Unique Features



Support for @BIOS



Support for Q-Flash



Support for Xpress BIOS Rescue



Support for Download Center



Support for Xpress Install



Support for Xpress Recovery2



Support for EasyTune

(Note 5)



Support for Easy Energy Saver



Support for Time Repair



Support for Q-Share

Bundled Software



Norton Internet Security (OEM version)

Operating System



Support for Microsoft

®

Windows

®

Vista/XP

Form Factor



Micro ATX Form Factor; 24.3cm x 24.3cm

- 13 - Hardware Installation

1-3 Installing the CPU and CPU Cooler

1-3-1 Installing the CPU

A. Locate the pin one (denoted by a small triangle) of the CPU socket and the CPU.

Read the following guidelines before you begin to install the CPU:

• Make sure that the motherboard supports the CPU.

(Go to GIGABYTE's website for the latest CPU support list.)

• Always turn off the computer and unplug the power cord from the power outlet before installing

the CPU to prevent hardware damage.

• Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

• Apply an even and thin layer of thermal grease on the surface of the CPU.

• Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and dam-

age of the CPU may occur.

• Set the CPU host frequency in accordance with the CPU specications. It is not recommended

that the system bus frequency be set beyond hardware specications since it does not meet the

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications, please do so according to your hardware specications including the CPU, graph-

ics card, memory, hard drive, etc.

AM3 CPU

AM3 Socket

A Small Triangle Marking

Denotes CPU Pin One

A Small Triangle Mark

Denotes Pin One of the

Socket

Hardware Installation - 14 -

B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.

• Before installing the CPU, make sure to turn off the computer and unplug the power cord from the

power outlet to prevent damage to the CPU.

• Do not force the CPU into the CPU socket. The CPU cannot t in if oriented incorrectly. Adjust the

CPU orientation if this occurs.

Step 1:

Completely lift up the CPU socket locking lever.

Step 2:

Align the CPU pin one (small triangle marking) with the triangle mark

on the CPU socket and gently insert the CPU into the socket. Make

sure that the CPU pins t perfectly into their holes. Once the CPU is

positioned into its socket, place one nger down on the middle of the

CPU, lowering the locking lever and latching it into the fully locked

position.

CPU Socket

Locking Lever

- 15 - Hardware Installation

1-3-2 Installing the CPU Cooler

Follow the steps below to correctly install the CPU cooler on the CPU. (The following procedure uses the

GIGABYTE cooler as the example.)

Step 1:

Apply an even and thin layer of thermal grease

on the surface of the installed CPU.

Step 2:

Place the CPU cooler on the CPU.

Step 3:

Hook the CPU cooler clip to the mounting lug

on one side of the retention frame. On the other

side,push straight down on the the CPU cooler

clip to hook it to the mounting lug on the reten-

tion frame.

Step 4:

Turn the cam handle from the left side to the

right side (as the picture above shows) to lock

into place. (Refer to your CPU cooler installation

manual for instructions on installing the cooler.)

Step 5:

Finally, attach the power connector of the CPU cooler to the CPU

fan header (CPU_FAN) on the motherboard.

Use extreme care when removing the CPU cooler because the thermal grease/tape between the

CPU cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler may damage

the CPU.

Hardware Installation - 16 -

1-4 Installing the Memory

DDR3_1

DDR3_2

DDR3_3

DDR3_4

Read the following guidelines before you begin to install the memory:

• Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest memory support list.)

• Always turn off the computer and unplug the power cord from the power outlet before installing

the memory to prevent hardware damage.

• Memory modules have a foolproof design. A memory module can be installed in only one direc-

tion. If you are unable to insert the memory, switch the direction.

If two memory modules are to be installed, it is rec-

ommended that you install them in the DDR3_1 and

DDR3_2 sockets.

Dual Channel Memory Congurations Table

(SS=Single-Sided, DS=Double-Sided, "- -"=No Memory)

DDR3_1 DDR3_2 DDR3_3 DDR3_4

DS/SS DS/SS - - - -

- - - - DS/SS DS/SS

DS/SS DS/SS DS/SS DS/SS

Two Modules

Four Modules

1-4-1 Dual Channel Memory Conguration

This motherboard provides four DDR3 memory sockets and supports Dual Channel Technology. After the

memory is installed, the BIOS will automatically detect the specications and capacity of the memory. En-

abling Dual Channel memory mode will double the original memory bandwidth.

The four DDR3 memory sockets are divided into two channels and each channel has two memory sockets as

following:

Channel 0: DDR3_1, DDR3_3

Channel 1: DDR3_2, DDR3_4

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one DDR3 memory module is installed.

2. When enabling Dual Channel mode with two or four memory modules, it is recommended that

memory of the same capacity, brand, speed, and chips be used and installed in the same colored

DDR3 sockets for optimum performance.

- 17 - Hardware Installation

1-4-2 Installing a Memory

Notch

Before installing a memory module, make sure to turn off the computer and unplug the power

cord from the power outlet to prevent damage to the memory module.

DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs. Be sure to install

DDR3 DIMMs on this motherboard.

DDR3 DIMM

A DDR3 memory module has a notch, so it can only t in one direction. Follow the steps below to correctly

install your memory modules in the memory sockets.

Step 1:

Note the orientation of the memory module. Spread the retaining

clips at both ends of the memory socket. Place the memory module

on the socket. As indicated in the picture on the left, place your n-

gers on the top edge of the memory, push down on the memory and

insert it vertically into the memory socket.

Step 2:

The clips at both ends of the socket will snap into place when the

memory module is securely inserted.

Hardware Installation - 18 -

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

• Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

• Always turn off the computer and unplug the power cord from the power outlet before installing

an expansion card to prevent hardware damage.

Follow the steps below to correctly install your expansion card in the expansion slot.

1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.

2. Align the card with the slot, and press down on the card until it is fully seated in the slot.

3. Make sure the metal contacts on the card are completely inserted into the slot.

4. Secure the card’s metal bracket to the chassis back panel with a screw.

5. After installing all expansion cards, replace the chassis cover(s).

6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for your

expansion card(s).

7. Install the driver provided with the expansion card in your operating system.

Example: Installing and Removing a PCI Express Graphics Card:

• Installing a Graphics Card:

Gently push down on the top edge of the card until

it is fully inserted into the PCI Express slot. Make

sure the card is securely seated in the slot and

does not rock.

PCI Slot

PCI Express x1 Slot

PCI Express x16 Slot

• Removing the Card from the PCIEX16_1 slot:

Gently push back on the lever on the slot and then lift the card straight out from

the slot.

- 19 - Hardware Installation

1-6 Setup of the ATI Hybrid CrossFireX

™

Conguration

Combining the onboard GPU with a discrete graphics card, ATI Hybrid CrossFireX can provide signicantly

advanced display performance for AMD platform. This section give instructions on conguring an ATI Hybrid

CrossFireX system.

A. System Requirements

- Windows Vista or Windows XP

(Note 1)

operating system

- An ATI Hybrid CrossFireX-supported motherboard and correct driver

- An ATI Hybrid CrossFireX-supported graphics card

(Note 2)

B. Connecting the Graphics Cards

Step 1:

Observe the steps in "1-5 Installing an Expansion Card" and install an ATI Hybrid CrossFireX-supported

graphics card on the PCI Express slot.

Step 2:

Plug the display cable into the onboard graphics port on the back panel.

C. BIOS Setup

Enter BIOS Setup to set the following items under the Advanced BIOS Features menu:

- Set Internal Graphics Mode to UMA+SidePort.

j

(Note 3)

- Set Internal Graphics Mode to UMA.

kl

(Note 3)

- Set UMA Frame Buffer Size to 256MB or 512MB.

(Note 3)

- Set Surround View to Disabled.

- Set Init Display First to OnChipVGA.

D. Conguring the Graphics Driver

After installing the motherboard driver in the operating system, go

to the ATI Catalyst

™

Control Center. Select CrossFire

™

on the

Graphics menu on the upper left corner and ensure the Enable

CrossFire

™

check box is selected.

(Note 1) For Windows XP, you must install AMD chipset driver version 8.51 or later.

(Note 2) You do not have to install the graphics card driver if the motherboard chipset driver has been in-

stalled.

(Note 3) To change the Internal Graphics Mode or UMA Frame Buffer Size setting in BIOS Setup, be sure

to disable the CrossFire function in the operating system rst.

j

Only for GA-MA785GPMT-UD2H.

k

Only for GA-MA785GMT-UD2H.

l

Only for GA-MA785GMT-US2H.

Hardware Installation - 20 -

1-7 Back Panel Connectors

USB Port

The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as a USB key-

board/mouse, USB printer, USB ash drive and etc.

PS/2 Keyboard or PS/2 Mouse Port

Use this port to connect a PS/2 keyboard or PS/2 mouse.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector. Connect a monitor that supports D-Sub connection

to this port.

DVI-D Port

(Note 1)(Note 2)

The DVI-D port supports DVI-D specictation. Connect a monitor that supports DVI-D connection to this

port.

HDMI Port

(Note 2)

The HDMI (High-Denition Multimedia Interface) provides an all-digital audio/video interface to transmit

the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI audio/video device to

this port. The HDMI Technology can support a maximum resolution of 1920x1080p but the actual resolu-

tions supported depend on the monitor being used.

In Windows Vista, select Start>Control Panel>Sound, select Realtek

HDMI Output and then click Set Default.

(Note 1) The DVI-D port does not support D-Sub connection by adapter.

(Note 2) Simultaneous output for DVI-D and HDMI is not supported.

(Note 1) (Note 2)

(Note 2)

• After installing the HDMI device, make sure the default device for sound playback is the HDMI

device. (The item name may differ by operating system. The following screen is from Win-

dows Vista.)

• Please note the HDMI audio output only supports AC3, DTS and 2-channel-LPCM formats.

(AC3 and DTS require the use of an external decoder for decoding.)

Page is loading ...

Gigabyte MA785GMT-UD2H Owner's manual

This manual is also suitable for

Gigabyte MA785GMT-UD2H Owner's manual

Related papers

Other documents