Trax XT-JS C12 User manual

Brand: Trax

Model: XT-JS C12

Category: Power banks

Type: User manual

Trax XT-JS C12 is a dual-use portable device that combines the functionality of a jump starter and a power bank.

With its high-capacity rechargeable battery, the Trax XT-JS C12 can jump-start vehicles with engines up to 3 liters petrol or 2.2 liters diesel, making it an ideal tool for emergencies. It also features smart crocodile car clips with LED display and protection against short circuits, overcurrent, overload, overvoltage, and overcharge.

In addition to its jump-starting capabilities, the Trax XT-JS C12 can also be used as a power bank to charge smartphones, tablets, and other electronic devices. It has a USB port that provides fast-speed charging and LED indicators that show the current charging level.

Trax XT-JS C12 is a dual-use portable device that combines the functionality of a jump starter and a power bank.

X-TraX Group

[email protected] - www.xtrax.it

ITALY

This device is manufactured in China.

All information are subjected to change without notice.

Imported from: X-TraX S.r.l. Via Bosisio Orlando, 16 - 22035 - Canzo (CO) ITALY

_______________________________________________________________

X-TraX: Manuale d’Uso XT-JS C12 (12/2016_rev.00_EN)

User Manual

X-TraX Group

XT-JS C12

Jump starter & Power bank

Attention please:

- Please strictly follow installation rules and suggestions reported into this manual.

- In order to avoid any warranty restriction please don’t not open the housing and / or modify the

- device in any way.

- Using of this device is under the full responsibility of the user. It is therefore necessary to use it

- carefully and in full compliance with the local legislation in force.

- Please don’t get the device wet.

- Please don't take the device apart. There are no user serviceable parts inside.

- Please don’t expose the device to extreme temperature or rapid changes from hot to cold, or

- vice versa. It may explode if disposed of in a fire.

- Do not physically touch crocodile clips together especially when the device is switched On.

- High power device: do not open the casing.

- High power device: risk of electrical shock or burn hazard.

- X-TraX S.r.l. is not responsible for any damage or disservice due to improper use of the device.

INDEX

1. Package list

2. General description

3. Specifications

4. Device general overview

5. How to use the device

6. Power bank LED indicator

Note:

6. Power bank LED indicators

By pressing the Power button, the LED indicators will show current charging

level for power bank device:

Blue

LED

1st Flash

1st Solid

2 Solid 3 Solid 4 Solid

Power status Low power

25%

50%

75%

100%

1. Package list

- Dual-use Jump starter & Power bank functions portable device

- High capability Li-Polymer rechargeable battery (12000mA/h)

- AC charger (Input: AC 100~240V / Output: DC 5V)

- Micro USB cable

- Clamps cable with LED indicators display

- Nylon bag

2. General description

XT-JS C12 is a dual-use for Jump starter & Power bank functions portable

device.

Thanks to built-in rechargeable battery with high capacity & long standby, it

helps you to start your vehicle when the battery is dead, and also useful to

recharge your own portable devices, such as smartphones and tablets,

whenever you want, wherever you are.

It comes with smart crocodile car clips with LED display and protection against

short circuit, overcurrent, overload, overvoltage and overcharge.

It is also supplied a LED torch with solid and strobe functions.

Easy use, compact and robust casing, XT-JS C12 is the best and reliable

solution when you need backup power in emergency conditions.

3. Specifications

- Size: 162 x 80 x 40mm. Weight: 495gr

- Operating temperature: from 0°C to 45°C (shell temperature must be less

- than 60°C)

- Recommended storage temperature: 20°C (±20%)

- Working humidity: 65-20%RH

- High capability rechargeable battery: 12000mA/h Li-Polymer – up to 6

- months in stand-by

- Full charging time: 15h (typical)

- Input charging port (micro USB): DC 5V / 2A

- Jump starter output: DC 12V (400A peak current)

- Power bank output (USB): DC 5V / 2,4A (Fast speed charge)

- Jump start DC 12V vehicles up to 10 times without extra charging (up to 3

- liters engine petrol / up to 2,2 liters engine diesel)

- Duty clamps cable with LED indicator display

- Protection against short circuit, overcurrent, overload, overvoltage and

- overcharge

- Built-in LED torch (solid and flashing functions)

- Power status LED indicators

- Special design, robust housing and compact size

4. Device general overview

1. LED indicators display

2. Red crocodile clip: positive +

3. Black crocodile clip: negative –

4. Positive end (+)

5. Negative end (–)

6. USB port output for recharging external devices

7. Micro USB port input for recharging power bank device

8. Charging level Blue LED indicators for power bank

9. Power button for power bank

10. LED torch

5. How to use the device

How to jump start the vehicle

1. Make sure the device is charged to at least 75%

2. Connect the clamps cable to the device making sure the “positive +” (4) and

2. “negative –“ (5) ends are inserted correctly

3. Once connected, both Green and Red LED indicators (1) on the clamps cable

2. will flash

4. Open the bonnet of the vehicle

5. Using the clamps cable attach Red crocodile clip (2) to the 'positive +' and

2. Black crocodile clip (3) to the 'negative –' of the vehicle battery

6. Once connected, turn On the engine by switching the vehicle starting

2. system

7. After the vehicle has been started, the LED indicator on clamps cable (1) will

2. flash Red and will make a buzzer sound

8. Unclip clamps cable from the vehicle battery within 15 seconds

9. If the vehicle requires another jump start, please unclip the clamps cable

2. from the vehicle battery for 5 sec. and then repeat steps from point 2 to 8

Attention please: jump starter function is suitable for DC 12V vehicles up to

3 liters engine petrol and up to 2,2 liters engine diesel.

How to charge the power bank

1. Connect the micro USB end of the charging cable to the device (7), and the

2. USB end to the AC charger

2. The Blue LED power indicators (8) will light up when the device is under

2. charging

3. When the Blue LED power indicators (8) are solid On then the device is fully

2. charged

4. Remove the charging cable when finished

How to charge external devices

1. Connect your external device to the USB port (6) of power bank

2. Press the Power button (9) to tum On the power bank

3. The power bank will start charging your external device

4. Remove the charging cable from the external device when finished

How to use the built-in torch

1. Hold down the Power button (9) until the LED torch (10) turns On

2. Once the LED torch is On, repeat to make the light flashing

3. Repeat to turn Off the LED torch

Trax XT-JS C12 User manual

Brand: Trax

Model: XT-JS C12

Category: Power banks

Type: User manual

Trax XT-JS C12 is a dual-use portable device that combines the functionality of a jump starter and a power bank.

Download PDF

report

Trax XT-JS C12 User manual

Trax XT-JS C12 User manual

Other documents