JRC JUE-60GX Owner's manual

Brand: JRC

Model: JUE-60GX

Type: Owner's manual

JUE-60GX Inmarsat Global Xpress GX

URL http://www.jrc.co.jp 1 Code No.

7ZPSC0588

JUE-60GX Operation Guide

1 BDE power on and satellite acquisition

1 Set the BDE power switch to on.

The LED indicators on the front side lights in the following sequence.

YRG

STS2 STS3 STS4ANT STS1READY

RX2 STATUS CM

PWR

TX RX1NET

How to read the LED panel

Green On

Green Blink

Red On

Red Blink

Yellow On

Off

Undecided

The shapes and precise colors of LED are different from

the actual shapes and colors.

Notes

• When the LED indication is different from any of the above, an error is assumed. For error

indications and the meanings, refer to “Appendix F.1” and for error handling procedures, refer to

“Appendix E”.

• Even if a large sound is emitted from ADE at power on, this does not mean a fault.

BDE power switch on

Starting boot loader

Starting OS

Completed OS start, starting core module (CM)

Completed CM start

To satellite search status

RRR

GGGGG

JUE-60GX Inmarsat Global Xpress GX

URL http://www.jrc.co.jp 2 Code No.

7ZPSC0588

2 The automatic satellite search (acquisition) function operates.

• JUE-60GX calculates the satellite position from the current positon information that was measured

by GPS, automatically directs the antenna to the satellite direction, and acquires the satellite.

• After acquisition, the antenna direction angle is automatically controlled so that the received wave

strength becomes the maximum.

• The LED indication at the front switches in the following sequence.

Searching satellite

Tracking satellite

Acquiring satellite

Completed satellite acquisition, tracking

From completion of CM start

GGGGG

G G GG G

G G GGG

G G

GGGGG

This will make the JUE-60GX service available.

Notes

• When the LED indication is different from any of the above, an error is assumed. For

error indications and the meanings, refer to “F.1” and for error handling procedures,

refer to “Appendix E”.

• When the statellite search function fails, please consult with your distributor or JRC

sales office.

JUE-60GX Inmarsat Global Xpress GX

URL http://www.jrc.co.jp 3 Code No.

7ZPSC0588

2 BDE power off

Turn off the power switch.

READY LED starts blinking in red and power disconnection processing is executed during this time. At

completion of power disconnection processing, all the LED indicators go off and the power is turned off.

Power switch off

Completion of power disconnection

GGG G

Do not unplug the power cable while power disconnection is in progress.

01JTM

ISO 9001, ISO 14001 Certified

May. 2017 Second Edition JRC

Not use the asbestos

JRC JUE-60GX Owner's manual

JRC JUE-60GX Owner's manual

JRC JUE-60GX Owner's manual

Related papers

Other documents