JUE-60GX Inmarsat Global Xpress GX
URL http://www.jrc.co.jp 1 Code No.
7ZPSC0588
JUE-60GX Operation Guide
1 BDE power on and satellite acquisition
1 Set the BDE power switch to on.
The LED indicators on the front side lights in the following sequence.
YRG
STS2 STS3 STS4ANT STS1READY
RX2 STATUS CM
PWR
TX RX1NET
How to read the LED panel
Green On
Green Blink
Red On
Red Blink
Yellow On
Off
Undecided
GR
The shapes and precise colors of LED are different from
the actual shapes and colors.
Notes
• When the LED indication is different from any of the above, an error is assumed. For error
indications and the meanings, refer to “Appendix F.1” and for error handling procedures, refer to
“Appendix E”.
• Even if a large sound is emitted from ADE at power on, this does not mean a fault.
BDE power switch on
Starting boot loader
Starting OS
Completed OS start, starting core module (CM)
Completed CM start
To satellite search status
GY
Y
YR
R
RRR
R
R
R
R
G
G
GG
G
G
G
R
G
G
GGGGG
JUE-60GX Inmarsat Global Xpress GX
URL http://www.jrc.co.jp 2 Code No.
7ZPSC0588
2 The automatic satellite search (acquisition) function operates.
• JUE-60GX calculates the satellite position from the current positon information that was measured
by GPS, automatically directs the antenna to the satellite direction, and acquires the satellite.
• After acquisition, the antenna direction angle is automatically controlled so that the received wave
strength becomes the maximum.
• The LED indication at the front switches in the following sequence.
Searching satellite
Tracking satellite
Acquiring satellite
Completed satellite acquisition, tracking
From completion of CM start
G
G
GGGGG
G
G
G
G G GG G
G
G
G
G
G G GGG
G
G
G G
G
G
GGGGG
G
G
GG
This will make the JUE-60GX service available.
Notes
• When the LED indication is different from any of the above, an error is assumed. For
error indications and the meanings, refer to “F.1” and for error handling procedures,
refer to “Appendix E”.
• When the statellite search function fails, please consult with your distributor or JRC
sales office.
JUE-60GX Inmarsat Global Xpress GX
URL http://www.jrc.co.jp 3 Code No.
7ZPSC0588
2 BDE power off
Turn off the power switch.
READY LED starts blinking in red and power disconnection processing is executed during this time. At
completion of power disconnection processing, all the LED indicators go off and the power is turned off.
Power switch off
Completion of power disconnection
GG
GGG G
G
G
GG
R
Do not unplug the power cable while power disconnection is in progress.
01JTM
ISO 9001, ISO 14001 Certified
May. 2017 Second Edition JRC
Not use the asbestos
/
