Home Decorators Collection 0258435-270X48 Installation guide

Brand: Home Decorators Collection

Model: 0258435-270X48

Type: Installation guide

PREPARING FOR INSTALLATION

□ Place bracket on the shade by

putting bolt through slot on top

of shade. Secure and tighten the

bracket using a wing nut. (Fig.A)

□ Brackets can be mounted behind

shade (Fig.A) or brackets can be

mounted to the side of shade (Fig.B)

2 POSITION SHADE

□ With brackets attached to the

shade, hold the shade against

the window where the shade will

be mounted. Mark position of

brackets with a pencil. Remove

brackets from shade.

3 INSTALL BRACKETS

□ Place brackets at pencil marks.

Predrill small holes for screws.

Brackets may be mounted to

ceiling (Fig.C) or to wall (Fig.D).

Screw brackets into place.

Installation

Use and Care Guide

Natural Roman Shade

Fig. C

Fig. D

Fig. B

Fig. A

3/4”

1,905 cm

1/2”

1,27cm

Fig. B

Fig. A

3/4”

1,905 cm

1/2”

1,27cm

Fig. B

Fig. A

3/4”

1,905 cm

1/2”

1,27cm

TOOLS REQUIRED

Tape Measure Drill & 1/16" bit Pencil

PACKAGE CONTENTS

Fig. C

Fig. B

Fig. A

3/4”

1,905 cm

1/2”

1,27cm

THIS IS NOT RECOMMENDED FOR USE AROUND CHILDREN!

CLEANING

May be cleaned with vaccum attachement or duster.

Please contact 1-877-527-0313 for further assistance.HOMEDEPOT.COM

Part Description Quantity

MOUNTING BRACKET 2 (23"-48") / 3 (52"-72")

BRACKET SCREWS 8 (23"-48") / 12 (52"-72")

CLEAT SCREWS 2

WING NUTS 2 (23"-48") / 3 (52"-72")

CORD CLEAT 1

Home Decorators Collection 0258435-270X48 Installation guide

Home Decorators Collection 0258435-270X48 Installation guide

Home Decorators Collection 0258435-270X48 Installation guide

Related papers

Other documents