American Standard Mezzo 9960.001 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard Mezzo 9960.001 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
J28
© 2008 AS America Inc.
MEZZO
SEMI-COUNTERTOP SINK
FIRECLAY
MEZZO™ SEMI - COUNTERTOP SINK
Space saving design installs on a minimum
countertop depth of 13"
Made from reclay china
Rear overow
Recessed self-draining deck
Barrier-free design
Self rimming with sealant
Cutout template and mounting kit provided
(Faucet shown not included)
9960.803 Faucet holes on 8" (203mm) centers
(illustrated)
9960.403 Faucet holes on 4" (102mm) centers
9960.001 Center hole only
Nominal Dimensions:
22" (559mm) wide, 21-1/2" (546mm) deep
Bowl sizes:
19" (482mm) wide
15" (381mm) front to back
6-7/8" (175mm) deep
Fixture Dimensions conform to ANSI Standard
A112.19.9M
Compliance Certications -
Meets or Exceeds the Following Specications:
ASME A112.19.9M for Non-Vitreous
Ceramic Fixtures
• CAN/CSA B45 series
• A1995 National Building Code, section 3.7 and
CAN/CSA-B651-02 and OBC 3.8
To Be Specied:
Color: White Bone Linen Black
Faucet*:
Faucet Finish:
Supplies & Stops:
Trap 1-1/4" (32 mm):
* See faucet section for additional models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP
ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS
USE TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation.
No responsibility is assumed for use of superseded or voided pages.
19"
(482mm)
1-3/8" (35mm) Dia.
1 Hole for CHO
9960 001
1-3/8" (35mm) Dia. 3 Holes
for 8" (203mm) centres
9960 803
1-1/4" (32mm) Dia. 3 Holes
for 4" (102mm) centres
9960 403
2-3/4"
(70mm)
8"
(203mm)
22"
(559mm)
4"
(102mm)
8"
(203mm)
15"
(381mm)
21-1/2"
(546mm)
Countertop
10-1/2"
(267mm)
11"
(279mm)
13" min.
(330mm)
10-1/2"
(267mm)
2-1/2"
(64mm)
10-1/2"
(267mm)
(cut out size)
Countertop
By Others
Finished
Floor
Finished
Wall
8-1/4"
(210mm)
6"
(152mm)
34"
(864mm)
IN ONTARIO
33"
(838mm)
1-3/8"
(35mm)
4-3/8"
(111mm)
*
10-5/8"
(270mm)
*
12-7/8"
(327mm)
1-1/4 O.D.
WASTE
SUPPLY
SCREW
NUT
FLAT
WASHER
#10 SCREW
MOUNTING BRACKET
COUNTERTOP -
BY OTHERS
WATERPROOF
SEALANT
BASIN
Revised 2/08
/