EZ Slide Cabinet Hardware 080 Installation guide

To install EZ Slide Cabinet Hardware, (metal slide on handles and pulls)

1. Place inside edge of handle over back edge of cabinet door or drawer.

2. Place other hand on the handle, and gently but firmly slide handle down, allowing the

handle to spread over the cabinet edge.

To fit your specific cabinet width, the handles can flex wider or narrower. You may need

to try this for a good fit.

www.YouTube.com/EZSlide1 for installation videos

EZ Slide Cabinet Hardware –Pulls and Handles – No Drilling needed

Made with recycled aluminum

Like us on EZ Slide Cabinet Hardware

Thank you!

This manual is also suitable for

Download PDF