2. TruAudio
  3. T100

TruAudio T100 Operating instructions

  • Hello! I've reviewed this user manual for the TruAudio T100 amplifier, OEB, and A.1x. The document provides clear instructions on how to install the OEB and rack mount to the amplifier and how to attach the A.1x to the OEB. I'm ready to answer any questions you have about the installation process or these devices.
  • How many screws should be removed from the T100 amplifier in the first step?
    How many screws removed from the T100 are used to attach the OEB and rack mount?
    What is used to attach the A.1x to the OEB?
INSTALLING THE OEB
Remove the three screws from
the T100 ampliļ¬er.
Attach the OEB and rack mount to the T100 using two of the
removed screws from the T100 and the included screw.
Attach the A.1x to the
two pre-installed screws
on top of the OEB using
the keyholes on the back
of the A.1x.
Finished Installation
www.TruAudio.com | 888.858.1555
1.
2.
3.
4.
SCREW FROM T100
INCLUDED SCREW
SCREW FROM T100
T100 RACK MOUNT
OEB BRACKET
PRE-INSTALLED SCREWS
A.1x KEY HOLES
/