2. Home
  3. Lighting
  4. Floor lighting
  5. TALA
  6. FL Series

TALA FL Series Installation guide

  • Hello! I have examined the installation guide for the Tala Poise Adjustable Floor Lamp, covering models BRAS-FL-01-US, NICK-FL-01-US, and GRAP-FL-01-US. The guide provides instructions for assembling the lamp, adjusting its height and using it with dimmable light. I am ready to answer any questions you have about your new lamp.
  • What should I do before starting the installation?
    What should I do if the cable is damaged?
    How long is the warranty on the product?
Thoughul lighng, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at us.tala.co.uk
INSTALLATION GUIDE
Poise Adjustable Floor Lamp
SKU - BRAS-FL-01-US
SKU - NICK-FL-01-US
SKU - GRAP-FL-01-US IP20 120V
US
Scan me for more
technical help
BEFORE STARTING
Please read instrucons thoroughly before installaon and
keep them for future reference. Please take extreme
care when dealing with electrical equipment.
WARNING
Bulbs must be installed in xture before turning on.
Ensure power is turned OFF before inserng plug.
CARE AND CLEANING
We recommend cleaning with a so dry cloth. Do not
use abrasive materials as these will damage the nish
of the product. Do not use alcohol or other solvents.
POISE ADJUSTABLE FLOOR LAMP - PROVIDED COMPONENTS
x1 Base Plate
x1 Lamp Stem
A
B
A
B
STEP 1
Place the base on the oor.
Screw the Lamp Stem A into
the centre of the Base Plate
turning clockwise unl ght.
Be careful not to tangle the cable
around the stem.
B
STEP 3
To adjust the height, loosen the
central clutch by turning the handle
an-clockwise and gently slide the
top half of the pole up or down unl
it reaches your desired height.
Turn the clutch clockwise to ghten.
STEP 2
Insert the bulb into the top of
the Lamp Stem and rotate
clockwise unl ght.
A
STEP 5
Insert the plug into your chosen
wall socket.
Join the Community
[email protected] | Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: ligholiveby
Tala North America, Inc. P.O. Box 89, 1051 Port Washington Blvd. Port Washington,
NY 11050
STEP 6
To turn on, rotate the dial on the top of the
lamp unl the bulb lights up.
Adjust the dimmer for your desired light
output.
WARRANTY AND AFTER-CARE
This product has a two-year warranty. If there appears to be a funconal
defect with the product during this me, please contact our team at
[email protected].
Please note, the exible cable aached to this luminaire cannot be replaced; if
the cable is damaged, recycle the luminaire and seek a replacement.
REGISTER YOUR PRODUCT
Extend your warranty on this product to up to ve years - free of charge.
Scan the QR code below to register:
/