2. Crystorama
  3. 8101-AG

Crystorama 8101-AG User manual

  • Hello! I've reviewed the assembly instructions for the Crystorama 8101-AG wall light. This document provides detailed steps on how to install the fixture, attach the shade and crystal drop, and handle the electrical components, which must be done by a licensed electrician. I am ready to assist you with any questions you may have.
  • What type of bulb is needed?
    Is it safe to install this light fixture by myself?
    What is the recommended use for this fixture?
How to Install
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
®
You will need 1-Candelabra Bulb
60 watts Max Bulb not included
USE LED BULBS FOR EXTENDED USE
This fixture is DRY rated
1.Attach the fixture onto the outlet box in the wall.
2.Put the shade on the candle sleeve and secure it in
place using the socket ring.
3.Install the recommended bulb into the socket and
screw the crystal drop into the bottom.
4.After connecting the wires, fix the back plate on
the mounting plate with screws.
6″
4.5″7.5″
2.9″14″
Ø5″
5.8″
ASSEMBLY INSTRUCTION MODEL #8101-AG
crystorama.com
Part Number
Part Numbers
A
B
C
E
F
PART NUMBER MODEL #8101-AG
A.Mounting Hardware
(1)Mounting Plate
(2)Mounting Screws
(3)Wire Nut
(4)Screws
B.(1)Back plate;4.5″x6″x0.63″h;XMO8101AGBKP6IN
C.(1)Crystal drop
E.(1)Candle Sleeve
F.(1)Shade;Ø5"x5.8"h;XMO8101SHA6IN
D.(1)Crystal Column
D
crystorama.com
/