2. Computers & electronics
  3. Cameras & camcorders
  4. Camera accessories
  5. Camera mounting accessories
  6. JONARD TOOLS
  7. RDT-18K Telescoping Pole

JONARD TOOLS RDT-18K Telescoping Pole, RDT-18K Operating instructions

  • Hello! I've reviewed the instructions for mounting the JONARD TOOLS WISPY™ camera to the telescoping pole. The document outlines the steps for connecting the adapter, gooseneck, and camera. I'm ready to answer your questions about this mounting process and the tools involved.
  • What adapter is used to mount the WISPY™ camera?
    Where is the adapter screwed onto the telescoping pole?
    What is connected to the adapter?
INSTRUCTIONS FOR MOUNTING JONARD TOOLS INSTRUCTIONS FOR MOUNTING JONARD TOOLS WISPY™WISPY™ TO THE JONARD TOOLS TO THE JONARD TOOLS TELESCOPING POLETELESCOPING POLE
1. Select the 8-32 to 1/4-20 adapter that is provided with the WISPY™
2. Screw the 8-32 end of the adapter into the hole on the top of the platform located on
the TELESCOPING POLE
3. Screw the exible gooseneck rod onto the 8-32 to 1/4-20 adapter
4. Screw the WISPY™ onto the end of the gooseneck as shown above
1
3
2
4
Tel 914.793.0700 | Fax 914.793.4527 | jonard.com
GOOSENECKGOOSENECK
RDT18K  RDT18K 
TELESCOPING POLE, 18 FTTELESCOPING POLE, 18 FT ADAPTERADAPTER
CF200  WISPY™ CF200  WISPY™
MULTIPURPOSE WIRELESSMULTIPURPOSE WIRELESS
INSPECTION CAMERAINSPECTION CAMERA
/