INSTRUCTIONS FOR MOUNTING JONARD TOOLS INSTRUCTIONS FOR MOUNTING JONARD TOOLS WISPY™WISPY™ TO THE JONARD TOOLS TO THE JONARD TOOLS TELESCOPING POLETELESCOPING POLE
1. Select the 8-32 to 1/4-20 adapter that is provided with the WISPY™
2. Screw the 8-32 end of the adapter into the hole on the top of the platform located on
the TELESCOPING POLE
3. Screw the exible gooseneck rod onto the 8-32 to 1/4-20 adapter
4. Screw the WISPY™ onto the end of the gooseneck as shown above
1
3
2
4
Tel 914.793.0700 | Fax 914.793.4527 | jonard.com
GOOSENECKGOOSENECK
RDT18K RDT18K
TELESCOPING POLE, 18 FTTELESCOPING POLE, 18 FT ADAPTERADAPTER
CF200 WISPY™ CF200 WISPY™
MULTIPURPOSE WIRELESSMULTIPURPOSE WIRELESS
INSPECTION CAMERAINSPECTION CAMERA