Harris NEXIO AMP Generation 6 Hardware Installation And User's Manual

NEXIO AMP

®

Generation 6

Hardware Installation and

User Guide

175-100423-00

Rev A

Copyright

©

method, for the purpose, without the written consent of Harris Corporation. Harris Corporation reserves the right to revise and

improve its products as it chooses. This publication is designed to assist in the use of the product, as it exists on the date of

publication of this manual, and may not reflect the product at the current time or an unknown time in the future. This

publication does not in any way warrant description accuracy or guarantee the use for the product to which it refers.

The Harris logo and assured communications are trademarks of Harris Corporation. All other trademarks are the property of their

respective

holders.

For more information about Harris products, contact Harris at Regional Service below.

Regional Service Contact Information

Technical support is available 24 hours a day, 7 days a week. You can contact technical support by phone or at

[email protected].

US,CANADA, CENTRAL AMERICA AND LATIN AMERICA:

 Call: +1 416 445 4032

 Toll Free: +1 888 534 8246

ASIA PACIFIC:

Monday to Friday: 9 am-5p

mHKT

 Call: +852 2776 90628

 After-Hour Hotline: +1 888 534 8246

 Email: [email protected]

EUROPE AND AFRICA:

 Support Line: +44 118 964 8100

MIDDLE EAST AND SOUTH ASIA (MESA):

Sunday to Thursday: 9 am-6 pm (Dubai/standard Gulf Time)

 Call: +971 4 4338250

 After-Hour Hotline: +44 118 964 8100

3

Table of Contents

Chapter 1 Introduction.......................................................................................................7

NXAMP3801HDX/HDI Configurations .....................................................................7

NXAMP3801HDX/HDI Software Options .................................................................8

Key Features ...........................................................................................................8

Specifications .......................................................................................................10

System ......................................................................................................10

Video ........................................................................................................11

Audio ........................................................................................................11

Video Compression Information ................................................................12

RAID Redundancy ......................................................................................13

Optional Operating System RAID 1 ............................................................13

Timecode Connection Options ...................................................................13

Remote GPI Control ...................................................................................14

Remote Serial Interface ..............................................................................14

Controls ....................................................................................................15

Physical .....................................................................................................15

Power Supply ............................................................................................15

Chapter 2 Chassis Components................................................................................17

NXAMP3801HDX/HDI Front Panels ....................................................................... 17

Front Panel - HDX Only ..............................................................................17

Front Panel - HDI Only ...............................................................................18

Front Panel Components ...........................................................................19

LED Indicators .....................................................................................19

LCD and Keypad .................................................................................19

Fiber Optical Drive Carrier Indicator .....................................................20

USB Ports ............................................................................................20

SYS ID Front Panel Indicator/Switch .....................................................21

Drive Configuration ...................................................................................21

RAID Configurations ...........................................................................21

NXAMP3801HDX/HDI Back Panel .........................................................................24

Back Panel Components ............................................................................26

SYS ID Back Panel Indicator/Switch ......................................................26

Power Supply Alarm Reset ..................................................................26

Power Supply ......................................................................................26

HD/SD SDI Video .................................................................................27

Table of Contents

4

175-100423-00

Reference Ports .................................................................................. 27

AES Audio .......................................................................................... 27

USB Ports ........................................................................................... 27

RS232 ................................................................................................ 28

Fibre Channel (HDX Only) ................................................................... 28

DVI 1/ DVI 2 ....................................................................................... 28

Ethernet ............................................................................................. 28

GPI Ports ............................................................................................ 28

COM Ports ......................................................................................... 29

Chapter 3 System Installation .................................................................................. 31

NXAMP3801HDX/HDI Rack Installation ................................................................ 31

Rack Location ........................................................................................... 31

Prepare for Setup ...................................................................................... 31

Choosing a Setup Location ................................................................. 32

Warnings and Precautions ......................................................................... 32

Rack Precautions ................................................................................ 32

General System Precautions ................................................................ 32

Rack Mounting Considerations ................................................................. 33

Ambient Operating Temperature ........................................................ 33

Airflow ............................................................................................... 33

Mechanical Loading ............................................................................ 33

Circuit loading .................................................................................... 33

Reliable Ground .................................................................................. 33

Rack Mounting ......................................................................................... 33

To Rack Mount NXAMP3801HDX/HDI ................................................ 34

To Remove NXAMP3801HDX/HDI from a rack .................................... 34

Connecting NXAMP3801HDX/HDI Redundant Power Supplies .................. 35

Prevent Damage and Malfunction ........................................................................ 35

Hardware .................................................................................................. 35

Anti-Virus Software ................................................................................... 35

Operating System Updates ........................................................................ 35

Automatic Updates ................................................................................... 36

Chapter 4 Connector Pinouts..................................................................................... 37

COM PORT Pinouts .............................................................................................. 37

RJ-12 to DB-9 ........................................................................................... 37

Weidmüller GPI Connectors ................................................................................. 37

Specifications ............................................................................................ 37

GPI In ........................................................................................................ 38

GPI Out ..................................................................................................... 39

How to Wire Your NEXIO Weidmüller Male Connectors ............................ 40

Chapter 5 Monitoring Your NXAMP3801HDX/HDI.................................. 41

Status Monitoring ................................................................................................ 41

NXAMP3801HDX/HDI

NEXIO AMP Generation 6 Hardware Installation and User Guide

5

175-100423-00

Remote Monitoring Using IPMI ..................................................................41

BIOS Setup ................................................................................................41

NEXIO Monitor .....................................................................................................44

To Open NEXIO Monitor ............................................................................44

Selecting Monitored Diagnostics ................................................................45

LCD Keypad Buttons ............................................................................................46

Chapter 6 System Drive Recovery ..........................................................................47

System Recovery ...................................................................................................47

Initial WIM Recovery Image ........................................................................47

Prepare the Drive for Capture ............................................................. 47

Format a Third-Party USB Stick ............................................................47

Capture the WIM Image .....................................................................48

Apply the WIM Recovery Image .................................................................50

Chapter 7 How to Create or Rebuild a RAID 1 Boot Drive ..............53

Creating a New RAID 1 Boot Drive ....................................................................... 53

Rebuilding a RAID 1 Boot Drive ............................................................................57

Chapter 8 Maintenance....................................................................................................61

Installation Tools ..................................................................................................61

Important Safety Guidelines .................................................................................61

Chassis Cover .......................................................................................................61

Removal ....................................................................................................61

Replacement .............................................................................................62

Replacing the Onboard CR2032 Battery ...............................................................62

Hot Swap Power Supplies .....................................................................................63

Replacing a Power Supply Module .............................................................64

Hard Drive Removal or Replacement .....................................................................65

Removing a Hard Drive Carrier from the Chassis ........................................65

Installing a Hard Drive into a Drive Carrier ..................................................65

Replacing a RAID 1 Boot Drive ...................................................................66

Replacing Media Drive - HDI Only ..............................................................67

AMI BIOS Recovery ...............................................................................................67

Fan Replacement ..................................................................................................69

Chapter 9 Troubleshooting ..........................................................................................71

BIOS Error Beep Codes .........................................................................................71

Non-fatal errors .........................................................................................71

Fatal errors ................................................................................................ 71

Power Supply Module Failure ............................................................................... 72

System Cooling ....................................................................................................72

CMOS Battery ......................................................................................................72

Table of Contents

6

175-100423-00

7

1

Introduction

This hardware and user guide provides important information for owners of the NEXIO AMP Generation 6

video server, the latest edition of the advanced media platform from Harris Broadcasting. This guide includes

information for both the Integrated and Shared Storage Transmission Server, the NXAMP3801HDI and

NXAMP3801HDX, respectively.

The 3RU NEXIO AMP

®

Server has undergone a transformation under the hood as it incorporates new

hardware including new processors, motherboard, graphic card and much more. As with its predecessor, the

NEXIO AMP Generation 6 supports up to 8 channels of SD-only I/O or up to 4 channels of mixed HD and SD

media. It is a resolution-independent platform supporting concurrent streams of SD, 720P, 1080i and 1080p

NXAMP3801HDX/HDI Configurations

NEXIO AMP Generation 6 is available in a variety of configurations. The available configurations are shown in

Table 1-1. The Software License Card provided with your server shows which configuration you have

purchased. If you want to upgrade to a different configuration, contact Harris BCD Support for an additional

license.

Table 1-1 NEXIO AMP Models

Model SD-Only Configuration

HD/SD- Mixed

Configuration

NXAMP3801HDX1  2-channel

NXAMP3801HDI1

NXAMP3801HDX2  4-channel  2-channel

NXAMP3801HDI2

NXAMP3801HDX3  6-channel  3-channel

NXAMP3801HDI3

NXAMP3801HDX4  8-channel  4-channel

NXAMP3801HDI4

Refer to Regional Service Contact Information on page 2.

Chapter 1

Introduction

8

175-100423-00

NXAMP3801HDX/HDI Software Options

The following software options are available for your NXAMP3801HDX/HDI:

 Software License Upgrades — The software license upgrades enable additional HD or SD channels, and

optional Media Applications.

Table 1-2 lists the additional software applications that are available for NXAMP3801HDX/HDI:

Table 1-2 Optional

Software Applications

Application Description

Closed Caption Import Support for exporting from a clip and importing to a clip closed caption data via FTP.

DNxHD Support Support for the recording and play out of DnxHD encoded clips.

H.264 Codec Support Support for the play out of h.264 encoded clips.

NEXIO AMP ChannelView Software that provides multiviewer I/O monitoring, enabling up to four NEXIO AMP

inputs

and four NEXIO AMP outputs to be viewed in real time on a computer

monitor.

NEXIO ClipSync Play back two separate clips together at the same time frame accurately.

NEXIO Instrinsic Mirroring

1

Software that controls and monitors mirroring of volumes on the NEXIO SAN. A

license is only required for SANs using the NXS3100

2

series of storage arrays.

NEXIO PlayList

3

Event sequencing application that runs on NEXIO NXOS or NEXIO Remote for media

playback.

NEXIO PRX Encoder Generate a simultaneous low resolution proxy of content being ingested via

baseband.

NEXIO Remote Remotely administer and control NEXIO video servers from any 64-bit Windows 7 PC

on

the same LAN as your NEXIO server.

NEXIO Track Router Software for NEXIO Remote and NXOS that controls the routing of audio on ingest,

the

addition of external audio and closed captions to stored media, and audio routing

rules on playout for multilingual broadcasts.

1

Optional for HDX only

2

NXS3100

3

Is included on the HDI model

Key Features

Table 1-3 outlines some of the key features of NXAMP3801HDX/HDI:

Table 1-3 Key Features

Features

HDX HDI

 3RU form factor

 

 8X internal SATA-2 hot-swappable drives (standard); additional 8X internal

SATA-2 hot-swappable drives (available for purchase)



 Automatic Aspect Ratio Conversion (ARC) using AFD (HD configured

servers only)

 

 Dolby® Digital and Dolby E audio pass-through

 

 Dual hot-swappable power supplies

 

NXAMP3801HDX/HDI

NEXIO AMP Generation 6 Hardware Installation and User Guide

9

175-100423-00

 Dual port 8 Gbps Fibre Channel support



 Easy integration with IP networks using Gigabit Ethernet for media

transfers

 

 EIA-608 <> EIA-708 and WST <> OP-47 closed caption transcoding using

software based real time processing (HD configured servers only)

 

 HD scales to 500+ channels with NEXIO Farad High-Performance Storage,

and 210+ channels with NEXIO NXS3100 SBOD Storage Arrays



 Includes FTP Server to move media from NEXIO to NEXIO or between

NEXIO and general purpose storage using the following file formats:

 GFX

 MOV

 MPEG2 transport and program streams

 MPEG4

 MXF OP-1A

 MXF OP-ATOM from P2 devices

 Native LXF

 WAV

 

 Integrated up/down/cross conversion support using software based real

time processing (HD configured servers only)

 

 Multitier user account access, prevents unauthorized operators from

altering video/audio procamps or deleting media

 

 Off-speed play

 

 Read, generate, and write continuous and discontinuous VITC

 

 Record and playback HD:

 MPEG-2 MP@HL l-frame 4:2:0 profile up to 100 Mbps, and 4:2:2

profile up to 150 Mbps

 MPEG-2 MP@HL Long GOP 4:2:0 profile and 4:2:2 profile up to 80

Mbps

 XDCAM HD at 35 Mbps (not available in 720p)

 DVCPRO HD at 100 Mbps

 XDCAM EX at 35 Mbps

 XDCAM HD422 at 50 Mbps

 H.264 playback only (optional)

 DNxHD (optional)

 AVC - Intra (playback optional)

 

 Record and playback SD:

 MPEG-2 l-frame and MPEG-2 Long GOP 4:2:0 profile up to 15 Mbps,

and 4:2:2 profile up to 50 Mbps

 IMX 30, IMX 40, and IMX 50

 DVCPRO25 and DVCPRO50

 DVCAM at 25 Mbps (625 only)

 H.264 playback only (optional)

 

 Runs NEXIO operating system (NXOS) software for ingest, playout, file

transfers, content management, and additional optional applications

 

 SD scales to 1600+ channels with NEXIO Farad High-Performance

Storage, and 450+ channels with NEXIO NXS3100 SBOD Storage Arrays



Table 1-3 Key Features (Continued)

Features

HDX HDI

Chapter 1

Introduction

10

175-100423-00

Specifications

This section describes the hardware and software specifications for NXAMP3801HDX/HDI.

System

Table 1-4 describes the general specifications for NXAMP3801HDX/HDI:

Table 1-4 General Specifications

Specifications HDX HDI

 32 GB RAM

 

 Dual-head DVI monitor interface

 

 Four 10/100/1000Base-T Ethernet adapters

 

 Four USB 2.0 ports on back panel

 

 PCI Express platform

 

 Single boot drive with optional second drive for RAID1

 

 Two redundant 8 Gb Fibre Channel ports



 Two Six-Core Intel Xeon 64-bit processors

 

 Two USB 2.0 ports on front panel

 

 USB keyboard and mouse (included)



 Windows 7 Ultimate (64-bit)

 

 Single boot drive with an option for a second drive for RAID 1

 

 Software-based codecs for coding and decoding SD and HD media

 

 Supports HD-SDI (SMPTE-292M) and AES/EBU interfaces

 

 Supports NEXIO Farad shared storage with hundreds of terabytes of

usable shared storage with RAID-601 storage protection



 Supports redundant Ethernet, which automatically switches operation

from one Ethernet network to the other, if one Ethernet network fails



 Supports SD (525i, 625i) and HD (1080i, 1080p, 720p) content on the

same chassis

 

 Supports up to 8 SD channels, or up to 4 HD channels

 

 Two Six-Core Intel Xeon

®

64-bit processors



 Works with a wide range of 3

rd

party automation, archiving, and media

management applications

 

Table 1-3 Key Features (Continued)

Features

HDX HDI

NXAMP3801HDX/HDI

NEXIO AMP Generation 6 Hardware Installation and User Guide

11

175-100423-00

Video

Table 1-5 describes the NXAMP3801HDX/HDI video specifications:

All SD and HD Input/Output Configurations require that you have registered your software. To

register your software, see the Software License Card provided with your system.

Table 1-5 NXAMP3801HDX/HDI Video Specifications

Aspect Ratio Conversion Up/down/cross conversion support

EIA-608 <> 708 & WST <> OP-47 caption conversion

AFD aspect ratio conversion

Port based aspect ratio conversion

User-based aspect ratio conversion

Channels SD = SDI (SMPTE-259M)

HD = HD-SDI (SMPTE-292M)

HD Aspect Ratio 16:9

HD Resolution and Frame

Rates

720p @ 25fps

720p @ 29.97fps

720p @ 50fps

720p @ 59.94fps

1080i @ 25fps

1080i @ 29.97fps

1080P @ 25fps

1080p @ 29.97fps

1080PsF @ 25fps

1080PsF @ 29.97fps

SD Aspect Ratio 4:3

16:9

SD Resolution and Frame

Rates

525 @ 29.97fps

625 @ 25fps

Audio

Table 1-6 describes the NXAMP3801HDX/HDI audio specifications:

Table 1-6 Audio Specifications

Channels & Formats 4 AES/EBU pairs per input channel

4 AES/EBU pairs per output channel

8 pairs embedded per input channel

8 pairs embedded per output channel

Compressed Audio Dolby Digital (AC-3) and Dolby E pass-through

Chapter 1

Introduction

12

175-100423-00

Video Compression Information

Table 1-7 lists HD and SD Compressions and Bit Rates for NXAMP3801HDX/HDI:

Table 1-7. Compressions

and Bit Rates

HD Compressions Bit Rate Audio Notes

MPEG2 4:2:0 I-Frame 50,80,100 Any audio configuration All HD resolutions

MPEG2 4:2:0 Long GOP 18,25,35,50,60,70,80

MPEG2 4:2:2 I-Frame 50,70,80,100,120,150

MPEG2 4:2:2 Long GOP 25,35,50,70,80

DVCPRO HD 100 8 ch @ 16-bit 720p, 1080i and 1080psf

XDCAM HD 35 4 ch @ 16-bit 1080i, 1080psf only

XDCAM EX 720p, 1080i and 1080psf

XDCAM HD422 50 4 ch or 8 ch @ 24-bit

AVC-Intra encode 50,100 Any audio configuration 720p, 1080i and 1080psf only, 2

channel

maximum

AVC-Intra decode 720p, 1080i, and 1080psf only,

NXCP

required

MPEG4 (h.264) decode

only

1-40 720p, 1080i and 1080psf, license

required

DNxHD 60-220

720p, and 1080i, license required

SD Compressions Bit Rate AUDIO Notes

MPEG2 4:2:0 4-15 Any audio configuration up to

8c

h

Long GOP and I-frame include the

same ranges

MPEG2 4:2:2 10-50

IMX 30,40,50

4 ch @ 24-bit or 8 ch @ 16-bit

DVCPRO 25,50 4 ch @ 16-bit

DVCAM 25

MPEG4 (h.264) decode

only

1-40 Any audio configuration License required (same as HD license)

Inputs 4 pairs HD-BNC, unbalanced (AES/EBU)

75 termination

1V p-p nominal levels

Outputs 4 pairs HD-BNC, unbalanced (AES/EBU)

75 termination

1V p-p nominal levels

Processing & Storage 16, 20, or 24-bit, PCM, 48kHz

Table 1-6 Audio Specifications (Continued)

NXAMP3801HDX/HDI

NEXIO AMP Generation 6 Hardware Installation and User Guide

13

175-100423-00

RAID Redundancy

Table 1-8 lists both the Integrated and Shared Storage versions of the NXAMP3801HDX/HDI level of

redundancy to protect against the failure of one or more storage drives:

Table 1-8 RAID Redundancy Specifications

Redundancy Specifications HDX HDI

Controller RAIDsoft™ software RAID management system

 

RAID Protection Schemes

Per Volume

RAID 3 (single drive parity; single drive failure

protection)

 

RAID 6 (double distribution parity; 2 drive failure

protection)



ECC (multiple drive parity; dual drive failure

protection)



Intrinsic Mirroring

Protection Scheme

Choice of RAID 3 or ECC storage protection plus

fully mirrored storage area networks

1



NEXIO Farad RAID-601 RAID 6 (drive protection) + RAID 0 (striping by

NEXIO's RAIDsoft to add bandwidth) + Intrinsic

Mirroring



1

Requires 2 SANs with identical configuration and capacity

Optional Operating System RAID 1

Table 1-9 explains RAID 1

Table 1-9 RAID 1 with optional boot drive

RAID 1 Description

HDX HDI

RAID 1 (Mirroring) protects data from drive failure

by simultaneously writing the same data to two

hard drives. Since each drive is an exact duplicate

of the other, you can continue working if one fails.

 

when an optional second OS drive is installed.

Timecode Connection Options

The following is a list of the timecode connection options for NXAMP3801HDX/HDI:

 RS-232

 TCP/IP

 Leitch clock interface

 VITC reader, writer, and generator

Chapter 1

Introduction

14

175-100423-00

Remote GPI Control

Table 1-10 and Table 1-11 describes the GPI control specifications for the NXAMP3801HDX/HDI:

Table 1-10 GPI output Specifications for the NXAMP3801HDX/HDI

Item Symbol Rating Unit

OUT 8 outputs (16 pin connector)

Load voltage (AC peak/DC) VOFF 20 VAC

Continuous load current IO 450 mA

ON resistance .8 ohms (typical)

5pF

Information correct according to data obtained by OMRON.

WARNINGS:

1 Be sure to turn OFF the power when wiring the Relay, otherwise an electric shock may be

received.

2 Do not apply overvoltage or overcurrent to the I/O circuits of the SSR, otherwise the SSR may

malfunction

or burn.

Table 1-11 GPI input Specifications for the NXAMP3801HDX/HDI

Item Symbol Rating Unit

IN 8 inputs (16 pin connector)

Forward current-continuous IF 60 mA

Forward Current-Peak IF (pk) 1.0A A

Reverse Voltage VR 6.0 V

LED Power Dissipation @ TA=25

ºC PD 150 mW

Information correct according to data obtained by Fairchild

Remote Serial Interface

The following is a list of the remote serial interface specifications for NXAMP3801HDX/HDI:

 RS-422 ports for control of up to eight channels; one port can be allocated for a VTR

 RJ-12 connector

 Harris ADC VDCP pinout. Refer to Chapter 4, Connector Pinouts on page 37.

NXAMP3801HDX/HDI

NEXIO AMP Generation 6 Hardware Installation and User Guide

15

175-100423-00

Controls

Table 1-12 describes the NXAMP3801HDX/HDI control specifications:

Table 1-12 Control Specifications

Input/Output

 Ethernet, TCP/IP via socket or UDP

 RS-422

 GPI

Protocols

 NEXIO Native Protocol

 VDCP

 Sony 9-Pin

Physical

Table 1-13 describes the NXAMP3801HDX/HDI size specifications:

Table 1-13 Size Specifications

Height 5.25 in. (13.4 cm); 3RU

Width 19 in. (48.3 cm)

Length 26 in. (71.4 cm) from the rack ears to the rear panel

Weight 47 lbs. (21.3 kg)

1

62 lbs. (28.12 kg)

2

1

HDX only

2

HDI only

Power Supply

Table 1-14 describes the system power specifications of the redundant power supplies:

Table 1-14 Redundant dual hot-swappable, dual load-sharing

Item Specification

Efficiency Level Certification 80 PLUS - Gold Level Certified

AC Input High Efficiency Power Supply

(1+1) 750W Redundant AC-DC

AC Input

 700 W: 100-140 V, 50/60 Hz, 12 Amp

 750 W:180-240V, 50/60 Hz, 6 Amp

DC Output (+12V) 62 Amp

DC Output (+5V) Standby 3 Amp

Chapter 1

Introduction

16

175-100423-00

17

2

Chassis Components

This chapter provides details on the front and back components of the NXAMP3801HDX and

NXAPMP3801HDI system.

NXAMP3801HDX/HDI Front Panels

A description of the front panel is shown in Table 2-1. The front panel of NXAMP3801HDX is shown in

Figure 2-1 and front panel of NXAMP3801HDI is shown in Figure 2-2 on page 18.

Front Panel - HDX Only

Figure 2-1 NXAMP3801HDX

Chapter 2

Chassis Components

18

175-100423-00

Front Panel - HDI Only

Figure 2-2 NXAMP3801HDI

Table 2-1 NXAMP3801HDX/HDI Front Panel

Item Number

Description For Additional Information

HDX

(

Figure 2-1)

HDI

(Figure 2-2)

1 1 LED Indicators used to monitor NEXIO AMP.

LED Indicators on page 19

2 2 LCD and Keypad work together to provide a

user

interface.

 LCD and Keypad on

page 19

 LCD Display Navigation

Sample

on page 46

3 3

4 4 Operating system (drive 0).

Drive Configuration on page 21

5 5 Optional drive, requires drive 0 for RAID 1.

6 6 USB Ports.

USB Ports on page 20

7 7 Alternate action illuminated pushbutton switch

used

to identify NXAMP3801HDX/HDI from

both the front and back panel. The blue

indicator can be turned on/off from either the

front or back panel.

SYS ID Front Panel Indicator/

Switch

on page 21

8 Optional Hot swappable media drives

configured RAID 3 or RAID 6.

Drive Configuration on page 21

NXAMP3801HDX/HDI

NEXIO AMP Generation 6 Hardware Installation and User Guide

19

175-100423-00

Front Panel Components

LED Indicators

The LED Indicators, Table 2-2, are used to monitor status and health of the frame. For more information on

monitoring NXAMP3801HDX/HDI, see Selecting Monitored Diagnostics on page 45.

Table 2-2 LED Front panel LED indicators

Front Panel LEDs

LED

Color

Description

TEMP Green Displays the current status of the CPU temperature.

Red Indicates temperature above critical threshold.

FAN Green Displays the current status of the fan.

Red Indicates fan stopped rotating or falls below programmed RPM limit.

PS Green Indicates the power supply is operating correctly.

Red Indicates power supply fault, drive problem or drift.

MEDIA Green Displays the current status of the LLM.

Red Indicates a critical problem due to drift or a drive problem.

LCD and Keypad

The LCD and keypad (Figure 2-3) work together to provide a user interface that enables you to power on,

power off, and reset the system. You can also view status and monitor the system using the arrow keys. (For

more information, see LCD Keypad Buttons on page 46).

Figure 2-3 LCD and Keypad

Power On/Reset Button:

The power on/reset button enables you to turn on NXAMP3801HDX/HDI, and reset the system.

 Turn On — press and hold the button for 5 seconds to power on the system.

 System Reset — when powered on; press and hold the button for 3 seconds to

reset the system.

Chapter 2

Chassis Components

20

175-100423-00

.

Power Off Button:

The power off button enables you to shut down the system as described below

 Power Off — press and hold the power off button for 5 seconds to shut down the

system.

Arrow Button:

 The arrow buttons enable you to access information and system status. For more

information on using the arrow buttons, see LCD Keypad Buttons on page 46.

Fiber Optical Drive Carrier Indicator

Each SAS3/SATA drive carrier (Figure 2-4) has one fiber optical carrier indicator on the front of the carrier.

Figure 2-4 Carrier status indicator

Blue:

 When flashing indicates drive activity.

 When solid indicates possible drive fault

USB Ports

The NXAMP3801HDX/HDI has two Universal Serial ports on the front panel.

The following USB devices can be used as sources and destinations when moving content in and out of the

server:

 NXUSBLTC

 NXUSBTC (for time code power only)

 USB CD-ROM/R/RW drives (source only)

 USB DVD-ROM/RW/RAM drives (source only)

 USB hard drives

 USB thumb drives

NXAMP3801HDX/HDI supports USB 1.0, 1.1, and 2.0.

Page is loading ...

Harris NEXIO AMP Generation 6 Hardware Installation And User's Manual

This manual is also suitable for

Harris NEXIO AMP Generation 6 Hardware Installation And User's Manual

Related papers

Other documents