DIGITAL MEDIA PLAYER PHOTO FRAME
BASIC MANUAL
Thank you for purchasing MICRODIA
®
Digital Media Player Photo Frame. This basic manual contains all the
information you need to start your Digital Media Player Photo Frame.
Digital Media Player Photo Frame Basic Manual
Nov 2006 MICRODIA Ltd.
Getting Started
1. Swing the Digital Media Player Photo Frame bracket on the back of the frame to the widest position for
greatest stability than Plug the power adapter into an electrical outlet.
2. Power on the Digital Media Player Photo Frame by pressing the power button on the remote control or on
the left side of the Digital Media Player Photo Frame
Inserting Memory Cards
The Digital Media Player Photo Frame is compatible with the following memory cards
•
Secure Digital
TM
card (SD)
• MultiMediaCard
TM
(MMC)
• Memory Stick
TM
, Memory Stick Pro
TM
& Memory Stick Duo
TM
• Compact Flash
TM
(CF)
• Microdrive
®
1. Insert the memory card with the front label facing [AWAY] from you. Do not force the memory card into the
memory slot
2. If you are not able to easily insert the memory card completely, you may have inserted it the wrong way.
3. If the card is inserted correctly and you have more than one supported media file on the card, you will see
[PHOTO], [MUSIC], [VIDEO] and [FILE] icons.
Installing and replacing battery
1. Place the remote control with the control buttons facing downward
2. While pressing down on the ridged area of the battery cover pull the tray out
3. Place a [CR2025] lithium battery on the tray with the positive [+] end facing toward you
4. Close the tray
TV Connection
1. Use the supplied RC out cable to connect the Digital Media Player Photo Frame to a TV.
2. Turn off both the Digital Media Player Photo Frame and the TV before you make the connection
Speaker Connection
Connect speakers to the earphone jack located on the right side of the Digital Media Player Photo Frame
Mounting Digital Media Player Photo Frame
1. The 7 mm mounting hole on the back of the Digital Media Player Photo Frame is used to mount your Digital
Media Player Photo Frame.
2. First secure a #6 size screw into your mounting surface
3. Gently hang the Digital Media Player Photo Frame onto the screw
4. Make any necessary adjustments by rotating the Digital Media Player Photo Frame on the screw.
Most problems or technical issues can be resolved by simply visiting our Support Section in MICRODIA
®
website,
www.microdia.com
or send us an email to [email protected].
/