Topeak TW009 Owner's manual

Type
Owner's manual
GB
User's Guide
minimum
2.54 cm (1")
Repair & storage solutions
2
PARTS LIST
1a
1b
2a
2b
2c
1d
1c
2d
2h
2g
2j
3a
3b
3c
3d
2f
2e
2i
1 2 3
Q'TY
1.
2.
3.
Side Bar Unit
1a. Side Bar
1b. Knob
1c. Hook
1d. M10 x 12L Bolt
Main Unit
2a. M15 x 13.5L Bolt
2b. Spacer
2c. Front Wheel Fixed Bar
2d. Bracket
2e. ø4.5 x 34L Screw
2f. ø7 x 37L Wall Plug
2g. M5 x 14L Bolt
2h. Metal Plate
2i. M4 x 6L Bolt
2j. Front Wheel Holder
Rear Wheel Holder Unit
3a. Rear Wheel Holder
3b. ø4.5 x 34L Screw
3c. ø7 x 37L Wall Plug
3d. Adhesive Strip
1
2
2
1
1
1
1
1
3
3
1
1
1
1
1
2
2
1
UNIT DESCRIPTION
* Tools Required: 3 mm Allen key, 8 mm Allen key and Phillips screw driver
Repair & storage solutions
3
ASSEMBLING MAIN UNIT TO THE WALL
INSTALLATION
1. Assembling Main Unit
2.Assembling Side Bar Unit
Mark locations for drilling.
Note:
8 mm
Allen key
3 mm
Allen key
3 mm
Allen key
8 mm
Allen key
Repair & storage solutions
4
ASSEMBLING REAR WHEEL HOLDER TO THE WALL
INSTALLATION
Option A
Option B
Two options for installing rear wheel
holder; screws or adhesive strip.
Note:
3.Assembling Rear Wheel Holder Unit
Hang the bike on main unit and mark the rear wheel
position for rear wheel holder installation.
Note:
* Helmet is not included.
WARNING
Topeak products are available only from professional bicycle shops.
Please contact your nearest Topeak authorized bicycle dealer for any questions.
For customers in the USA, call: 1-800-250-3068 Website: www.topeak.com
2-year Warranty: All mechanical components against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the
warranty begins on the date of manufacture. All warranties will be void if the product is damaged due to user abuse, system
alteration, modification, or used in any way not intended as described in this operating manual.
M-TW009-GB 9/06
* The specifications and design are subject to change without notice.
WARRANTY
Repair & storage solutions
5
Copyright © Topeak, Inc. 2006
1. DO NOT INSTALL OneUp bike holder on unsupported wall surfaces, plasterboard or
paneling. Make sure OneUp is mounted to a solid stud, beam, or wall. Be careful to avoid
electrical, gas, or water pipes and conduits.
2. The bottom wheel must have a ground clearance
of 1" (2.54 cm) when a bike is in the OneUp
bike holder.
3. Inspect the OneUp installation carefully before
hanging a bike. Failure to check the mounting
securely can result in possible bodily harm
and bicycle damage.
4. When hanging a bike, check to see that both
wheels are properly inserted in their
respective holders.
5. Maximum tire width: 6 cm (2.35”)
6. Maximum weight capacity: 16 kgs (35 lbs)
minimum
2.54 cm (1")
6 cm
(2.35")
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Topeak TW009 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI