De Dietrich DVH1342JDVH 1342 J Owner's manual

Brand: De Dietrich

Model: DVH1342JDVH 1342 J

Category: Dishwashers

Type: Owner's manual

This manual is also suitable for

DVH1342J

EN INSTRUCTION MANUAL

Reviewing the section on troubleshooting Tips will help

you solve some common problems by yourself.

Dea r Customer,

Please carefully read th is manual before using the

dishwasher, it will help you use and mainta in the

dishwasher properl y.

Pass it on to any subsequen t owner of the app liance.

This manual contains sections on safety Instructions,

Operating Instructions, Inst allat ion Instructions and

Troubleshooting Tip s, etc.

The man ufacture r, following a policy of con stant

dev elopment and updating of the product, may

make modificatio ns witho ut giving prior notice.

If lost or out-of-date, you can receive a new user

manual from the manufacturer or responsible

vendor.

Keep this manual for future reference.

If you cannot solve the problems by yourself,

please ask for help from a professional technician.

Dishwasher Features.................................... ........6

A Water So ftener............ ......... ......... .... .... ..........7、

................................... ............... 12

Recommendations fo r loading and unl oading

the dishwasher

Filter System................ ......... ........................ ......16

Caring for the Dishwasher........... .......... ............. .17.

B Loading th e Salt into the Softener......................8、

C Filling the Rinse Aid Dispenser........ ........ ......... 8、

D Function of Detergent ........... ........................ ...9、

Loading the upper ....................................13Basket

Loading the Lower ....................................13Basket

Wash Cycle Table................................................14

Turning on the Appliance.....................................14

... ......... ..............15

Changing the Program mid-cyc le

At the en d of th e Wash Cycle................................15

Before calling for service........................... ..........25.

Error codes.................................... ...................26.

Technical information.............................. ..... .....27..

Control Panel.. ........... .... ........... .... ............... .........6

Inst allation preparation. ......... ........................ .....18

........19Aesthetic panel's dimensions and installation

Tension adjustment of the door spring ...................21

Connection of drain hoses...... ........................ .....21

Dishwasher installation steps......................... .....22

About Electricity Con necting................................23

Cold Water Conne ction. ................... .............. .....24

This appliance is intended to be used in household

and similar applications such as:

-staff kitchen areas in shops, offices and other

working environments;

-farm houses;

-by clients in hotels, motels and other residential type

environments;

-bed and breakfast type environments.

This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision

or instruction concerning use of the appliance in a

safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning

and user maintenance shall not be done by children

without supervision.(For EN60335-1)

Packaging material could be dangerous for children!

This appliance is for indoor household use only.

To protect against the risk of electrical shock,

do not immerse the unit, cord or plug in water or

other liquid.

Please unplug before cleaning and performing

maintenance on the appliance.

Use a soft cloth moistened with mild soap, and then

use a dry cloth to wipe it again.

When using your dishwasher,

follow the precautions listed below:

This appliance must be earthed. In the event of a

malfunction or breakdown, earthing will reduce the

risk of an electric shock by providing a path of least

resistance of electric current. This appliance is

equipped with an earthing conductor plug.

The plug must be plugged into an appropriate outlet

that is installed and earthed in accordance with all

local codes and ordinances.

Improper connection of the equipment-earthing

conductor can result in the risk of an electric shock.

Check with a qualified electrician or service

representative if you are in doubt whether the

appliance is properly grounded.

Do not modify the plug provided with the appliance;

If it does not fit the outlet.

Have a proper outlet installed by a qualified electrician.

Do not abuse, sit on, or stand on the door or dish

rack of the dishwasher.

Do not operate your dishwasher unless all enclosure

panels are properly in place.

Open the door very carefully if the dishwasher is

operating, there is a risk of water squirting out.

Do not place any heavy objects on or stand on the door

when it is open. The appliance could tip forward.

When loading items to be washed:

1) Locate sharp items so that they are not likely to

damage the door seal;

2) Warning: Knives and other utensils with sharp points

must be loaded in the basket with their points

down or placed in a horizontal position.

Check that the detergent powder is empty after

completion of the wash cycle.

Do not wash plastic items unless they are marked

dishwasher safe or the equivalent.

For check the

manufacturer's recommendations.

Use only detergent and rinse agents recommended for

use in an automatic dishwasher.

The door should not be left open, since this could increase

the risk of tripping.

If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified

person in order to avoid a hazard.

During installation, the power supply must not be

excessively or dangerously bent or flattened.

Do not tamper with controls.

The maximum number of place settings to be washed

is 13.

The maximum permissible inlet water pressure is 1MPa.

The minimum permissible inlet water pressure is 0.04MPa.

facing

“ ”

unmarked plastic items not so marked,

Never use soap, laundry detergent, or hand washing

detergent in your dishwasher.

The appliance needs to be connected to the main water

valve using new hose sets. Old sets should not be reused.

This appliance's packaging materials are recyclable.

Dispose of the packaging into a suitable waste

collection container to recycle it.

It is prohibited to dispose of this appliance as

household waste.

Correct Disposal of this product: this symbol on the

product or in its packing indicates that this product

may not be treated as household waste. Instead,

it should be taken to the appropriate waste collection

point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of

correctly, you will help prevent potential negative

consequences for the environment and human health,

which could otherwise be caused by the inappropriate

waste handling of this product.

For more detailed information about the recycling of

this product, please contact your local council your

household waste disposal service, or the shop where

you purchased the product.

For disposing of package and the appliance please

go to a recycling centre. Therefore cut off the power

supply cable and make the door closing device

unusable.

Cardboard packaging is manufactured from recycled

paper and should be disposed in the waste paper

collection for recycling.

By ensuring this product is disposed of correctly, you

will help prevent potential negative consequences

for the environment and human health, which could

otherwise be caused by inappropriate waste handling

of this product.

For more detailed information about recycling of this

product, please contact your local city office and your

household waste disposal service.

DISPOSAL: Do not dispose this product as unsorted

municipal waste. Collection of such waste separately

for special treatment is necessary.

For detailed operating method read the corresponding content on the instruction manual.

For each wash cycle.

For programs with pre-wash,please put the detergent anywhere inside the

inner tank except in compartment A

(Follow the user instructions!)

Electric indicator on control panel (if provided).

Check the rinse aid level

(On models with water softener system only.)

Electric indicator on control panel (if provided).

If there is no salt warning light in the control panel

(for some models), you can estimate when to fill the salt into

the softener by the number of cycles the dishwasher has run.

Check the regeneration

salt level

Load the baskets

Select a programme

Turn on the water tap ,close the door . The machine will start working at once.

Running the dishwasher

Switch off the appliance

Turn off the water tap,

unload the baskets

Fill the detergent dispenser

Warning: wait a few minutes (abou t 15 minutes ) before unlo ading the dishwas her to avoid

han dling the dishes and utensils while they are still hot and more s uscep tible to brea k.

The dishes will also dry bett er. Firs t start unloading the lower basket.

Changing the programme

Adding forgotte n dishes

in t he dishwash er.

To load the baskets, ref er to th e sect ion en titled Load ing th e Dish washe r Baskets .“ ”

Touc h any progra mme button until the sele cted p rogram me li ghts u p.

( See the section entitled Op eratio n instr uction )“ ”

If the appliance is switched

off during a wash cycle.

Open the door care fully.

Look out for hot ste am

when openin g the door!

If the appliance is switched off during a wash cycle, when switched

on again, please re-select the washing cycle and operate the dishwasher

according to the original Power-on state ).

Switch on the appliance Open the door, the On/Off button to switch on the appliance .

touch

1.Open the door a little to stop the dishwasher.

2.After the spray arms stop working, you can open the door completely.

3.Add the forgotten dishes.

4.Close the door, the dishwasher will start running again .

1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent

may have already been released and the water already drained. If this is the case, the detergent

dispenser must be refilled.

2.Open the door.

3. for more than 3 seconds to cancel the running programme.

4. Select a new programme.

5. Restart the dishwasher.

Touch any programme button

When the working cycle has finished, the buzzer of the dishwasher will sound 8 times, then stop.

Turn off the appliance using the On/Off Button.

Since the appliance is standing by, it will power off automaticly after 30 minutes without any operation.

before using it for the first tim e.

To get the best perform ance from your dishwasher, read all operating instructions

7.Program functions, on ly one function can b e selected in

a cycle:

Express, t o reduce the program time.

3.Screen- Show the program time and d elay time;

Eg: program time

Delay time

2. Program Buttons-touch to select the Prog ram,

corresp onding in dicator will be lightened;

Auto

Intensive

Normal

ECO

Glass

90M in

Rapid

4.Status In dic ators :

Faucet is not open

Rinse detergent need to be refilled

Salt need to be refilled

1. Power B utton- touch on and off. 5.Delay Buttons:

6.Alt Function Buttons and indicators:

Increase

Upper basket

Reduce

Lower basket

Front view

Ba ck View

Extra Dryi ng: Fina l rinse temperature increases and

an extend ed dryin g phase is added to impro ve d rying

efficiency. It involves a slight energy consumption in

cr ease.

Strong wash: An increa sed temperature during the main

wash and a ad ditional rising are added to impro ve clean ing

efficiency. This function will involve an energy and water

consumpt ion i ncrease.

Dispenser

Cup Shelf

Spra y arms

Filter assem bly

Inlet pipe connector

Drain pipe

Lower Basket

Inner pipe

Upper Basket

Salt Contai ner

The water softener must be set m anually, using the water hardness dial.

The water softener is des igned to rem ove minerals and salts from the water, which woul d have

a detrimental or adverse effect on the operation of the app liance.

The more mi nerals there are, the harder your wate r is

The softener should be adjusted according to the hard ness of the water in your area. Your local Water Authority

can advise you on the hardness o f the water in your area.

Adjusting Salt Consumption

The dishwasher is designed to allow for adjustment in the amount of salt co nsumed bas ed on the ha rdness of

the water used. This is intended to optimise and customise the level o f salt consum ption.

1. Open the door ,Switch on the appliance;

2. Touch the program button for more than 5 seconds to star t the water softener

setting mode within 60seconds after the appliance was switched on(Salt and

Rinse aid warning lights will be on periodically );

3. the progr am button to select the proper set according to ,

4. To end the setting mode, either touch the On/Off button or wait 5 sec onds

Touch

th e setting will change in the following sequence: H1->H2->H3->H4->H5->H6->H1;

Rapid

seeting mode is on

the hardness of you r local waterRapid

WATER SOFTENER

The hardness of the water varies from place to plac e. If hard water is used in the dishwasher, de posits will

form on the dishes and utensils.

The appliance is equipped with a sp ecial softener that uses a salt container specifically designed to eliminate

lime and minera ls from the water.

Contact your local water board for information on the hardness of your water supply.

Please follo w the steps below for adjustment in salt consumption.

If your model does not have any water softener, you may skip this section.

The manufactory setting: H3 (EN 50242)

Before using you r dishwasher for the first time:

A. Set the water softener

B. Add 1.5Kg dishw asher salt and then full fill the salt container with w ater

C. Fill the rinse aid dispenser

D. Fill in detergent

Clark: British degree

fH: French degree

dH: German degree

dH=1.25 Clarke=1.78 fH =0.178mmol/l

mmol/l

0~90~5 0~0.94 0

10-20

6-11

1.0-2.0 9

21-3012-17 2.1 -3.0 12

0~6

7-14

15-21

Clarke

WATER HARDN ESS

Sel ector Position

Salt con sumption

(gram/cycle)

18-22 31-40 22-28 3.1-4.0

41-6023-34 4.1 -6.0 30

29-42

35-55 61-98 43-69 6.1-9.8

1. The salt container must only be refilled when the salt warning light in the control panel comes on.

Depending on how well the salt dissolve s, the salt warning light may still be on even though the

salt container is filled.

If there is no salt warning light in the con trol panel (for some Mode ls),you can estimate when to fill

the salt into the softener by the cycles that the dishwasher has run.

I f sal t has spilled, run a soak or qu ick prog ram to remo ve i t.

Always use the salt intended for dishwasher use.

The salt contain er is located beneath the lower basket and should be filled as explained

in the following:

Warning!

Only use salt spe cifically desi gne d for dishwashers use! Every other type of

salt not specifically desig ned for dishwasher use, e specially table salt, will

damage the water softener. In case of damages caused by the use of unsuitable

salt the manufacturer does not give any warranty nor is liable for any damages caused.

Only fil l with salt before runnin g a cycl e.

This will prevent any g rains of salt or salty wate r, which may have been spilled,

remaining on the bottom of the machi ne for any period of time, which may cause

corrosion.

Rinse Aid Dispenser

Function of Rinse Aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, a s pot and streak free drying.

Warning!

Only use branded rinse aid for dishwasher. Never fill the rinse aid dis penser with any other substances

(e.g. Dishwasher cleaning ag ent, liquid detergent). Th is would damage the app liance.

with water,It is normal for a small amount of wa te r to

come out of the salt container.

Fill the salt cont ai ne r to its maximum li mit

A After the low er basket has been removed, unscrew and remove the cap from the salt container.

B Pl ace the end of the funnel (supplied) into the hole and introduce about 1.5kg of di shwasher salt.

D Af ter fil ling the container ,

screw back the cap tightly.

E The sal t warning light will stop being after the sa lt co ntainer has been fill ed with sa lt.

F Immediat ely after filling the salt into the salt container, a washing program should be started

program Other wise the filt er system, pump or other important parts of t he machine may be damaged

by salty water. This is out of warranty.

(We suggest to use a short

The rinse aid is released during the final rinse to prevent water from formi ng droplets on your di shes, which can

leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is

designed to use liquid rinse aids. Th e rinse aid dispenser is located inside, on the door and next to the detergent

dispenser.

To fill the dispe nser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely

black. The volume of the rinse aid container is about 110ml.

To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.

Carefully pour in the r inse-aid into its dispenser, whil st avoiding it t o overf lo w.

Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.

Adjusting Rinse Aid Dispenser

The rinse aid dispenser has six or fou r settings. Always st art with the dispenser

set on "4". If spot s and poor drying are a problem, increase the amoun t of rinse

aid disp ensed by removing the dispenser lid and rotating the dial to "5". If the

dishes still are not drying properly o r show spots, adjust the dial t o the next

high er lever until your dishes a re sp ot-free. The recom mended setting is "4".

(Factory value is "4".)

Inc rea se th e dose if there are drops of water o r lime spots on the dish es afte r washing.

Reduce i t if there are sticky whitis h stains on your dish es o r a bluish fil m on glassware or

knife blades.

As the rinse aid diminishes, the size o f the black dot

on the rinse aid level indicator changes, as illustra ted below.

Full

3 / 4 full

1 / 2 full

1 / 4 full - Should refill to eliminate spotting

Empty

When to Refill the Rinse Aid Dispenser

Unless the rinse-aid warning light on the control panel is on, you can always estimate the amount from the co lor

of the optical level indicator "C "located nex t to the c ap. When the rinse-aid container is f ull, the indicator

will be fully dark. The size o f the dar k dot de creases as t he rinse-aid diminishes. You sho uld neve r let

the rinse aid level be less than 1/4 full.

during the next wash. Don't forget to re place the cap be fore you close dis hwasher door.

Clean up any rinse aid spil led while during filling with an absorbent cloth to avoid excessive foaming

The chemical ingredients that compose the detergent are necessary to remove, crush and dispense all dirt out of the

di sh was he r. Most of the commercial qualit y detergen ts are suitable for this purpo se.

" "

Proper Use of Detergent

Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry.

Don't put powdered detergent into the dispenser u ntil you're ready to wash dish es.

Warning!

Amount of Detergent to Use

Dishwasher detergent is corrosive!

Take care to keep it out of reach of children.

Based on their chemical composition, deterge nts can be split in two basic types:

Dete rgent tablets of different brands disso lve at different speeds. For this reason some

detergent tablets cannot dissolve and develop the ir full cleaning power during short

prog rams. There fore please use long programs when u sin g detergent tablets, to

ensure the complete removal of detergent residuals.

The dispenser m us t be re filled before the start of each wash cycle f ollowing the instructions

provided in the wash cycle table . Your dis hwa sher uses less detergent and rinse aid than

Conventiona l dis hwa sher. Generally, only one tablespoon of detergent is needed for

a normal wash load. More heavily soiled items need more detergent. Al way s ad d the

detergent just before star ting the dishwasher, otherwise it could get damp and w ill not

dissolve properly.

Concentrated Detergent

Detergent Tablets

Detergent Dispenser

co nventional, alkaline dete rgents w ith caus tic comp onents

low alkalin e co ncentrated detergen ts with natural enzymes

Normally new pulverised detergent is with out phosphate. Thus the water softener function of

phosphate is not given. In this case we recommend to fill salt in the salt con tainer even when

the hardness of water is only 6 dH. If dete rgents w itho ut phosphate are used in the case of hard water

often white spots appear on d ishes and glasses. In this case please add more detergent to r each

better result s. Detergents without chlorine do only bleach a little. S tron g and coloured spots wil l not

be removed completely. In this case please choose a program with a hi gher temperature.

Detergents

There are 3 sorts of d etergents

1.With phosphate and with ch lorine

2.With phosphate and without chlorine

3.Withou t phosphate and without chlorine

Always add the detergent just before starting each wash cycle.

Only use branded detergent aid for dishwasher.

If the lid is closed: press release button. T he lid will spring open.

Detergent powder

Fill the detergent dispenser w ith detergen t.

The marking indicates the dosing levels , as

Illustrated :on the right

Plea se observe the manufacturers do sing and storage

Recommendations as stated on the detergent packaging.

Close the lid and p ress on it until it locks into place.

If the dishes are heavily soiled, add an additional prewash detergent dose.

This detergent will take effect during the pre-wash phase.

Filling the detergent dispenser

You information about the amount of detergent for the single programme on page 14.

will find

Be aware that dep end ing on the so iling of wate r, se tting ma y be diffe rent.

Please observe the manufa cturer's recommendations on the detergent packaging.

1. Place the main washing cycle deter gent in the storage

compartment i ndicated with an A on the picture.

Th e marking on the compartment indica tes the dosing

level.

2. Place pre-wash detergent cycle detergent anywhere

inside the inner tank

“ ”

Cutlery with wooden, horn china or

mother-of-pearl handles

Plast ic items that are not heat resistant

Older cut lery with glued parts that are not

temperature resistant

Bonded cutler y ite ms or dishes

Pewter or cooper items

Crystal glass

Steel items subject to rusting

Wooden platters

Items made from synthetic fibres

Some types of glasses can become

dull after a large number of washes

Silver and aluminum parts have a

tendency to discolour during washing

Glazed patterns may fade if machine

washed frequently

Are not suitable

Are of limited suitability

Dishes and items of cu tlery must not lie inside one another, or cover each other.

The upper basket is designed to ho ld more delicate and lighter dishware such as glasses , coffee

and tea cups

Long bladed knives stored in an upright position are a potential haza rd!

Long and/or sharp items o f cutlery such as carving knives must be positi oned

horizonta lly in the upper basket.

Please do not ove rload your dishwasher. T his is important for good results and for

reasonab le consumption of energy.

To avoid damage , glasses should not touch on e an other.

Load lar ge and difficult to clean it ems in the lower basket.

Load hollow items suc h as cups, glasses, pans etc. With the opening facing downwards so that

water can not collect in the container or a deep b ase.

Consider buying utensils which are identified as dishwasher-proof.

Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further

information from the detergent manufacturers.

For particular items, select a progr am with

To prevent damage, do not take glass a nd c utlery out of the dishwasher immediately

after the programme has ended.

t he lowest possible temperature.

(For best performance of the dishwasher, follow these loading guidelines.

Features and appearance of baske ts and cutlery baskets may vary from your model.)

Scrape off any larg e amounts o f leftover food. Soften remnants of burnt food in pans.

It is not necess ary to rinse the dishes under running water.

Place objects in the dishwasher in following way:

1.Items such as cups, glasses, pots /pans, etc. a re faced downwards.

2.Curved items, or ones with recesses, should be loaded aslant so th at water can run off.

3.All utensils are stacked securely and can not tip over.

4.All utensils are placed in the way t hat the spray arms can rotate freely during washing.

Very sm all items should not be washed in the dishwasher as they could easily fall out of the basket.

To prevent water dripping from the uppe r basket into the lower basket, we recommend that you

empty the lower basket first

, fo llowed by the

upper basket.

For better stacking of pots and pans, the spikes can be folded

down as show on the picture below.

The upper basket is designed t o hold more delicate

and lighter dishware such as glasses, coffee and

tea cups and saucers, as well as pl ates, sm all bowls

and shallow pans (as long as they are not too dirty).

Positi on the dishe s an d co okw are so that they will

not get moved by the spray of wate r.

Pots, ser ving bowls, etc, must always be placed to p down.

Deep pots should be slan ted to allow water to flow out.

Please be reminded that:

The Bottom Basket features fo lding spikes so that larger or more pots and pans can be loaded.

They do not nest together.

Silverware is placed with the male face up.

Long utensils in the middle.

Cutlery should be placed in the cutlery basket with the handles at the bottom. If the rack has side baskets, the

spoons should be loaded separately into the appropriate slots, utensils should be placed in the

horizontal position at the front of the upper basket .

Especially long

Do not let any item extend through the bottom.

Always load sharp utensils with the sharp point down!

The height of th e up per rack can be easi ly ad just ed to

accommodate taller dishes in ei ther the uppe r an d lo wer

rac k. To rai se the ra ck t o the upper position, lift rack until

both sides are a t the same h eigh t. The rack will secur e

into place. To lo wer the rack , push down on the h andl e

and release.

For better stacki ng o f cups, the sh elves ca n be folded

down as show on the picture belo w.

We suggest that you place large items and the most

difficult to clean items such as

pots, pans, lids, serving dishes and bowls, as shown

in the figure below. It is preferable to place serving

dishes and lids on the side of the racks in order to

avoid blocking the rotation of the top spray arm.

into the lower bask et:

For a top quality cleaning, place t he silverware in the basket m aking sure th at:

Means: Rinse-aid dispenser needs to be filled.

( )

*EN 50242 : This programme is the test cycle. The inform ation for comparability test

in acco rdance with EN 50242, as follows:

Capacity: 13 settings

Position Upper ba sket:

Rinse aid setting: 6

PI:0.49w;Po:0.45w

Lower position

Starting a cycle wash

Draw out the lowe r and upper basket, load the d ishes and pu sh them back.

It is lo ad the lower basket first, then the upper one (s ee the section entitled

Loading the Dishwasher ).

Pour in the detergent (see the section e ntitledSalt, Detergen t and Rinse Aid).

Insert the plug into the socket. The pow er supply is 2 20-240 VAC /50 HZ, the specification

of the socket is 10A 250VAC. Make sure that the water supp ly is turned on to full pressure.

Open the doo r, touch the power button, and the On/O ff light will turn on.

f a program is selected, the resp onse light will . Then close the door,

re com men ded to

turn on the dishwash er

wi ll start its cycle.

“ ”

5 Touch an y program button, i

5/30g

1or2 pieces

5/30g

1or2 pieces

5/30g

1or2 pieces

For normally soiled loads,

such as pots plates

glass es and lig htly

soiled pans.

、、

For heavi est soil ed crock ery,

and normally soi led pots

pans dishes etc with dried

on soiling.

、

A shorter wash for lightl y

soiled loads a nd qu ick

was h.

35g

1 piece

25g

5/30g

1 piece

For lightly soi led cr ockery

and glass.

5/30g

1or2 pieces

Auto sensing wash, lightly,

normally or heavily soi led

crockery, with or with out

dried-on food

This is standard progr amm e, it is

suitabl e to clean normally soi led

tableware and it is the m ost eff icient

pr ogramme in terms of its com bined

ener gy and water consumpt ion for

that type of tabl eware.

For normally soiled loads

that need quick wash.

Pre-wash(50 )

Wash (60 )

Rinse

Rinse(70 )

Drying

℃

Pre-wash(45 )

Was h (55 )

Rinse

Rinse (65 )

Drying

℃

Pre-wash

Wash (45 )

Rinse(65 )

Drying

℃

Wash (45 )

Rinse

Rinse (55 )

℃

(50 )℃

185

220

175

1.3

0.92

1.6

0. 75

17.5

13. 5

(65 )

Rinse

Rinse (65 )

Drying

wash

℃

12.51.35

130

0.9

Pre-wash

Wash (40 )

Rinse

Rinse(60 )

Drying

℃

11~150.9~1.3

150

Pre-wash (45 )

Autowash(45-55 )

Rinse

Rinse(65 )

Drying

℃

Normal

Rapid

Glass

Int ensi ve

( *EN 502 42)

90 Min

If you open the door , the machine will pause. The program light will

stop blinking and the buzzer will mooing every minute unless you close the door . After

you close the door ,the machine will keep on working again .

during a wash cycle

Premise:

A can only be modified if it has only been running f or a short time. Otherwise, the

detergent may have already be en released, and the appliance may have already drained the wash water.

If this is the case, the detergent dispenser must be refilled (see the section entitled " Loading the

Detergent " ).

Open the door , , the machine will be in standby state,

then yo u can change the program to the desired cycle setting (see the section entitled " Starting a

wash cycle. . ." ).

touch more than 3 seconds

running cycle

the running program

button

A forgotten dish can be added any time before the detergent cup opens.

Add forgotten dishes.

Close the door

After the spray arms stop working, you can open the door

completely.

Open the door a little .

The dishwasher will start running again.

It is dangerous to open the door mid-cycle,

as hot steam may scald you.

When the wo rking cycle has finished, the buzzer of the dishwasher will soun d for 8 seconds, then stop. Turn off

the appliance using the ON/O FF button, shut off the wa ter supp ly and open the door of the dishwashe r.

Wait for a few minutes before unlo ading the dishwasher to avoid ha ndlin g the dishes and utensils while th ey

are still hot and more suscept ible to break. They wi ll also dry be tter.

Switching Off the Dishwasher

The program light is on but is not blinking,

only in this case has the program ended.

1.Open the door.Switch off the dishwasher by pressing the ON/OFF button.

2.Turn off the water tap!

Open the door carefully.

Hot dishes are sensitive to minutes before removing from

the appliance.

Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they

will be cooler and the drying will be improved.

shocks. The dishes should cool down for around 15

Unloading the dishwasher

Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto

the dishes in the lower one.

It is normal for the dishwasher to be wet insid e.

The filter prevents larger remnants of food or other obj ects from getting insi de th e pump.

The residues may block the filter, in this case they must be rem oved .

The filter system consists of a coar se filter,a flat (Main f ilter)

And a microfilter(Fine filter).

Fo od and soil particles trap ped in this filter are pulverize d by a

specia l jet on the lower spr ay arm and w ashed down drain.

La rger ite ms, such as p ieces of bones or glass, that could block

the drain are trapped in the coarse filter. To remove the items

caught by the filter, gently sque eze the tap on the top of this

filter and lift out.

This filter holds soil and food residues in the sum p area a nd

preve nts

the m fr om b eing red epo site d on the dishes d uring wash cycle.

Main filter

Coarse filter

Fin e filter

Filter assembly

The filter efficiently

For best performance and results, the filter must be cleaned regularly. this reason, it is a good idea to

remove the larger food particles trapp ed in the filter after each was h cycle by rinsing the semicircular filte r and

cup under runnin g water. To remove th e filter device, pull the cup handle in the upward d irection.

remo ves food particle s from the wash water, allowing it to be rec ycle d during the cycl e.

For

The dishw asher m ust never be used without the filters.

Impro per replacement of the filter may reduce the performance level of the appliance

and damage dishes and utensils.

Step 1 Turn the：

filter counterclockwise,

Step 2 lift the filter assy up：

When following this procedure from step1 to step 2, the filter system will be removed;

when following it from Step 2 to Step 1, the filter system will be installed.

The control pane l can be clea ned by using a lightly dampened cloth.

After cleaning, make sure to dry it thoroughly.

For t he exter ior, use a good appliance polish wax.

Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.

Winterzing

1 .Cut off the electrical power to the dishwasher at the supply source.

2. Turn off the water supply and disconnect the water inlet pipe from the water valve.

3. Drain the water from the inlet pipe and water valve. (Use a pan to gather the water)

4. Reconnect the water inlet pipe to the water valve.

5. Remov e the filt er at the bottom of the tub and use a sponge to soak up water in the sump.

please take frost protection measures on the dishwasher in winter. Every fter washing cycles,

please operate as follows

time a

：

Cleaning the Filter

Cleaning The Door

To clean the coarse filte r and the fine filt er, u se a cleaning brush. Rea ssemble the filte r parts (see page 15) and

rei nsert the m in the dish was her, pos itioning them in their sea t and pressing downwards.

When cleaning the filters, Otherwise, the filters could be

contorted and the perform ance of the dishwasher could be decreased.

do not knock the m.

To cle an the edge around the door, you

To avoid pene tration of water into the door lock and electrical components, do not

use a spray cleaner of any kind.

sh ould only use a soft, ward and damp

cloth.

Never u se a spray cleaner to clean the door panel as it may dam age the door loc k

and electrical components.

Abrasive agents or som e paper towels shou ld not be used becau se of the risk of

scratching or leaving spots on the stainless steel surface.

Cleaning the Spray Arms

If your dishwasher cannot work because of the ice,

please contact professional service persons.

It is necessary to clean the spra y arms re gularly fo r hard

wate r che micals w ill clog the sp ray arm jets and bearings.

- After each cyc le, c heck for any deb ris in the filte r to avoid future b lock age.

- By unscrew ing the coarse filter, you can remove the filter system. Re move any foo d remnants and

clean the filters under running water.

Remarks:

The entire filter assembly should be cleaned once a week.

To remove th e lower spray arm, pull out the spray arm u pwa rd.

To remove the upper spray arm, hold the nut, rotate the arm

clockwise to remove it.

Wash the arms in soapy and warm water and use a soft brush to

clean the jets. Replace them after rinsing them thoroughly.

It is recommend that you run a wash cy cle with the

dishwasher empty an d then remove the plug from the

sock et, turn off the water supply and leave the door of

the appliance slightly open. This w ill help the door

seals to last longer and prevent odours from forming

withi n the appliance.

If the appliance must be moved, try to keep it in the

vertical position. If absolutely necessary, it can be

positioned on its back.

One of the factors that cause odours to form in the

dishwasher n the seals.

Periodic cleaning with a damp sponge will prevent this

from occurring.

is rema ining food strapped i

Before cleaning or performing maintenance, always

remove the plug from the socket.

To cle an the exterior and rubber parts of the di shw asher,

do not use solvents or abrasive cleaning products.

Only use a cloth with warm so apy water.

To remove spots or stains from the surface of t he

interior, use a cloth dampened with water a n a little

vinegar, o r a cleaning pro duct mad e specifically for

dishw ashers.

Remove the Plug

No Solvents or Abrasive Cleaning

Moving the Appliance

Seals

After every wash, turn off the water supply to the

appliance and leave the door slight ly op en so that

moisture and odours are not trapped inside.

After Every Wash

When not in use for a Timelong

Th e installation of the pipes

and electrical equipments

should be done by professionals.

Electrical Shock electrical power

dishwasher.

Failure to do so can result in death or electrical shock.

Hazard. Disconnect

before installing

The installation position of dishwasher should be ne ar the existing inlet and drain hoses and power cord.

One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of the dis hwa sher.

Installation preparation

Note: please che ck the accompanying installation accessories(hook for aesthetic panel, screw)

●

Page is loading ...

De Dietrich DVH1342JDVH 1342 J Owner's manual

Brand: De Dietrich

Model: DVH1342JDVH 1342 J

Category: Dishwashers

Type: Owner's manual

This manual is also suitable for

DVH1342J

Download PDF

report

De Dietrich DVH1342JDVH 1342 J Owner's manual

This manual is also suitable for

De Dietrich DVH1342JDVH 1342 J Owner's manual

Related papers

Other documents