Black & Decker BDB530 User manual

Page is loading ...

ENGLISH

2

(Original instructions)

D

C

B

A

1

2

3

4

5

6

Parts Identiﬁcation

1. Nozzle

2. Blast Port

3. Trigger Switch

4. Lock-On Button

5. Suction Port

6. Dust Bag

Intended use

Your BLACK+DECKER Blower has been

designed for blowing & cleaning

applications, as well as light suction

purpose.

General Power Tool Safety Warnings

WARNING Read all safety warnings

and instructions Failure to follow

the warnings and instructions may

result in electric shock, ﬁre and/or serious

injury.

Save all warnings and instructions for

future reference

The term “power tool” in the warnings refers

to your mains-operated (corded) power tool

or battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power

tools create sparks which may ignite the

dust or fumes.

c) Keep children and bystanders away

while operating a power tool.

Distractions can cause you to lose

control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁed

plugs and matching outlets will reduce

risk of electric shock.

b) Avoid body contact with earthed or

grounded surfaces such as pipes,

radiators, ranges and refrigerators. There

is an increased risk of electric shock if

your body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool

will increase the risk of electric shock.

d) Do not abuse the cord. Never use the

cord for carrying, pulling or unplugging

the power tool. Keep cord away from

heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the

risk of electric shock.

e) When operating a power tool outdoors,

use an extension cord suitable for

outdoor use. Use of a cord suitable for

outdoor use reduces the risk of electric

shock.

f) If operating a power tool in a damp

location is unavoidable, use a residual

current device (RCD) protected supply.

Use of an RCD reduces the risk of electric

shock.

3) Personal safety

a) Stay alert, watch what you are doing and

use common sense when operating a

power tool. Do not use a power tool

while you are tired or under the

inﬂuence of drugs, alcohol or

medication. A moment of inattention

while operating power tools may result in

serious personal injury.

b) Use personal protective equipment.

Always wear eye protection. Protective

equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing

protection used for appropriate

conditions will reduce personal injuries.

3

ENGLISH

(Original instructions)

4

ENGLISH

c) Prevent unintentional starting. Ensure

the switch is in the o position before

connecting to power source and/or

battery pack, picking up or carrying the

tool. Carrying power tools with your

ﬁnger on the switch or energising power

tools that have the switch on invites

accidents.

d) Remove any adjusting key or wrench

before turning the power tool on. A

wrench or a key left attached to a

rotating part of the power tool may

result in personal injury.

e) Do not overreach. Keep proper footing

and balance at all times. This enables

better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose

clothing or jewellery. Keep your hair,

clothing and gloves away from moving

parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

g) If devices are provided for the

connection of dust extraction and

collection facilities, ensure these are

connected and properly used. Use of

dust collection can reduce dust-related

hazards.

4) Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your application.

The correct power tool will do the job

better and safer at the rate for which it

was designed.

b) Do not use the power tool if the switch

does not turn it on and o. Any power

tool that cannot be controlled with the

switch is dangerous and must be

repaired.

c) Disconnect the plug from the power

source and/or the battery pack from the

power tool before making any

adjustments, changing accessories, or

storing power tools. Such preventive

safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands

of untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any other

condition that may aect the power

tool’s operation. If damaged, have the

power tool repaired before use. Many

accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to bind

and are easier to control.

g) Use the power tool, accessories and tool

bits etc., in accordance with these

instructions taking into account the

working conditions and the work to be

performed. Use of the power tool for

operations dierent from those intended

could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a

qualiﬁed repair person using only

identical replacement parts. This will

ensure that the safety of the power tool is

maintained.

Additional Safety Instructions for

Blowers

• Do not collect still smoldering cigarette

ashes, freshly cut metals shaving, screws,

nails and the like.

• Never block suction inlet and outlet.

• Do not cross gravel paths or roads whilst

your product is switched on during

blow/vac mode. Walk, never run.

• Always be sure of your footing,

particularly on slopes.

• Do not overreach and keep your balance

at all times.

(Original instructions)

5

ENGLISH

• Do not place the inlet or outlet of the

vacuum near eyes or ears when

operating. Never blow debris in the

direction of bystanders.

• Keep all cooling air inlets clear of debris.

• To protect your feet and legs while

operating the appliance, always wear

heavy duty footwear and long trousers.

• Never allow children to use the

appliance.

• Wear protective goggles while operating.

• If operating an appliance in a damp

location is unavoidable, use a Residual

Current Device (RCD) with a tripping

current of not more than 30mA

protected supply. Use of an RCD reduces

the risk of electric shock.

• To prevent dust irritation the wearing of

a face mask is recommened.

• Disconnect the appliance from the mains

supply

- whenever you leave the machine;

- before cleaning a blockage;

- before checking, cleaning or working

on the appliance;

- if the appliance starts to vibrate

abnormally.

• Store the appliance only in a dry place.

Warning symbols

Do not use in the rain or leave

outdoors while it is raining.

Always wear eye protection.

Always wear ear protection.

Keep bystanders away.

Do not touch the fan.

Switch o: Remove plug from mains

before cleaning or maintenance

Labels on tool

The following symbols are shown on the

tool:

Warning! To reduce the risk of injury,

the user must read the instruction

manual.

Position of Date Barcode

The Date Code which also includes the year

of manufacture, is printed into the housing.

Example:

2014 XX JN

Year of manufacturing

Electrical safety

This tool is double insulated; therefore

no earth wire is required. Always

check that the power supply

corresponds to the voltage on the rating

plate.

If the supply cord is damaged, it must be

replaced by the manufacturer or an

authorised Black and Decker Service centre

in order to avoid a hazard.

The extension cable must be suitable for

outdoor use and marked accordingly. Up to

0.75 mm² H05VV-F or H05RN-F extension

cable can be used without loss of product

performance.

(Original instructions)

Assembly

Warning! Before assembly, make sure that

the tool is switched o and unplug.

Use

Mounting The Nozzle For Blowing

Operations (ﬁg. A)

• Insert the pin located inside the Nozzle

into the notch provided on the Blast Port

(2)

• To lock Nozzle in place, turn the Nozzle

in the direction indicated.

• To remove Nozzle, turn the Nozzle in the

opposite direction.

Mounting The Nozzle And Dust For

DustCollection (ﬁg. B)

• For dust collection, mount the Dust Bag

at the Blast Port (2) and Nozzle at the

Suction Port (5)

• To remove Dust Bag and Nozzle, simply

pull out by ﬁrst turning in the opposite

direction.

• Empty the Dust Bag frequently to ensure

maximum dust collecting eciency.

Operating The Blower (ﬁg. C)

• To switch your Blower on, depress the

Switch (3). To stop your Blower, release

Switch.

• When continuous operation is required,

ﬁrst depress the switch and then the

lock-on button (4) and release to

disengage lock, squeeze and release

switch.

Warning: Continuous running of machine

should not exceed 30 minutes.

Replacing Carbon Brushes (ﬁg. D)

• Use a screwdriver to remove the brush

holder cap.

• Take out the worn carbon brush, insert

the new one and secure the brush hold

cap.

Warning! Remove and check the carbon

brushes regularly. Replace when they wear

down to the limit mark.

Accessories

The performance of your tool depends on

the accessory used. BLACK+DECKER and

Piranha accessories are engineered to high

quality standards and designed to enhance

the performance of your tool. By using these

accessories you will get the very best from

your tool.

Maintenance

Your tool has been designed to operate over

a long period of time with a minimum of

maintenance. Continuous satisfactory

operation depends upon proper tool care

and regular cleaning.

Warning! Before performing any

maintenance, switch o and unplug the tool.

• Regularly clean the ventilation slots in

your tool using a soft brush or dry cloth.

• Regularly clean the motor housing using

a damp cloth. Do not use any abrasive or

solvent-based cleaner.

Technical data

BDB530

Voltage V 220 - 240

Frequency Hz 50/60

Power W 530

No-load speed /min 16,000

Air Volume m

3

/min 3.5

Weight Kg 1.6

6

ENGLISH

(Original instructions)

7

ENGLISH

Protecting the environment

Separate collection. This product

must not be disposed of with normal

household waste.

Should you ﬁnd one day that your

BLACK+DECKER product needs

replacement, or if it is of no further use to

you, do not dispose of it with household

waste. Make this product available for

separate collection.

Separate collection of used products

and packaging allows materials to be

recycled and used again. Reuse of recycled

materials helps prevent environmental

pollution and reduces the demand for raw

materials.

Local regulations may provide for separate

collection of electrical products from the

household, at municipal waste sites or by

the retailer when you purchase a new

product.

BLACK+DECKER provides a facility for the

collection and recycling of BLACK+DECKER

products once they have reached the end of

their working life. To take advantage of this

service please return your product to any

authorised repair agent who will collect

them on our behalf.

You can check the location of your nearest

authorised repair agent by contacting your

local BLACK+DECKER oce at the address

indicated in this manual. Alternatively, a list

of authorised BLACK+DECKER repair

agents and full details of our after-sales

service and contacts are available on the

Internet at: www.2helpU.com.

Guarantee

Black + Decker is conﬁdent of the quality of

its products and oers an outstanding

guarantee. This guarantee statement is in

addition to and in no way prejudices your

statutory rights. The guarantee is valid

within the territories of the Member States

of the European Union and the European

Free Trade Area.

If a Black + Decker product becomes

defective due to faulty materials,

workmanship or lack of conformity, within

24 months from the date of purchase,

BLACK+DECKER guarantees to replace

defective parts, repair products subjected to

fair wear and tear or replace such products

to make sure of the minimum inconvenience

to the customer unless:

• The product has been used for trade,

professional or hire purposes.

• The product has been subjected to

misuse or neglect.

• The product has sustained damage

through foreign objects, substances or

accidents.

• Repairs have been attempted by persons

other than authorised repair agents or

Black + Decker service sta.

To claim on the guarantee, you will need to

submit proof of purchase to the seller or an

authorised repair agent. You can check the

location of your nearest authorised repair

agent by contacting your local

BLACK+DECKER oce at the address

indicated in this manual. Alternatively, a list

of authorised BLACK+DECKER repair agents

and full details of our aftersales service and

contacts are available on the Internet at:

www.2helpU.com

Please visit our website

www.blackanddecker.co.uk to register your

new Black + Decker product and to be kept

up to date on new products and special

oers. Further information on the Black +

Decker brand and our range of products is

available at www.blackanddecker.co.uk.

(Original instructions)

8

FRANÇAIS

D

C

B

A

1

2

3

4

5

6

(Instructions initiales)

Page is loading ...

ALGERIA: SARL Outillage Corporation, After Sale Service Center-08, Rue Mohamed Boudiaf - Cheraga, Algiers, Algeria, Tel:

+213 21 375131, Fax: +213-0-369667. AZERBAIJAN: Kontakt - NN LLC, M.Qashqay 43, Baku, Azerbaijan Az1000. Tel:

+994 12 4082050, Fax: +994 12 4117090. BAHRAIN: Alfouz Services Co. WLL., P.O. Box 26562, Tubli, Manama, Tel: +973-17783562/

17879987, Fax: +973-17783479. Kewalram & Sons Co. WLL P.O. Box 84, Manama, Kingdom of Bahrain, Tel: +973-17213110/ 17210617/

17210619, Fax: +973-17213211/ 17210627. BANGLADESH: Ultra Corporation, 8, Kushol Centre, Uttara, Dhaka 1230. Tel:

+880-2-8922144, Fax: +880-2-8951339. EGYPT: Anasia - Egypt for Trading S.A.E., 9, Mostafa Refaat St., Sheraton Heliopolis Bldgs.,

Cairo, Egypt, P.O.Box 2443 Heliopolis 11361, Tel. : (202) 268 4159, Fax.: (202) 268 4169, www.anasia.com. ETHIOPIA: Seif Sherif Trade

PLC -Arada Sub City, Kebele 01-02, Global Insurance Bldg., 2nd Flr. Room 43, P.O.Box 2525, Addis Ababa, Ethiopia, Tel:

00-251-11-1563968/ 1563969, Fax: 00-251-11-1558009. INDIA: Gryphon Appliances Ltd., D-6/4, Okhla Industrial Area, Phase-I, New

Delhi-110020, Tel: +91-11-46731111, Fax: +91-11-46731111. JORDAN: Bashiti Hardware, 93 King Abdullah 2nd St., Opp ELBA House,

P.O. Box 3005, Tel: +962-6-5349098 ext.11, Fax: +962-6-5330731. KENYA: Leading Concepts, P.O. Box: 40877-00100, Nairobi, Kenya.

Tel: +254 20 690 5000, Fax: +254 20 690 5111. KUWAIT: Al Omar Technical Co., P.O. Box 4062, Safat 13041, Kuwait, Tel:

00965-24848595/ 24840039, Fax: 00965-24845652. The Sultan Centre, P.O. Box 26567-13126 Safat, Kuwait, Tel: 00965-24343155 Etn.

432, Fax: 00965-24319071. LEBANON: Aces Service Centre, P.O. Box 90-102, Nahr El Mot, Seaside Highway, Pharaon Building, Beirut.

Tel: 00961-1-898989, Fax: 00961-1-245880. LIBYA: Homeworld Co., Building No.5, Senidal St., Amr Ibn Elaas Road, Benghazi, Libya.

Tel: 00218-61-9094183. Service Center1 - Benghazi: Tel: +218-061-3383994, Fax: +218-092-7640688, Service Center2 - Tripoli: Tel:

+218-021-3606430, Fax: +218-092-6514813. MALTA: John G Cassar Ltd. 36-Victory Street, Qormi QRM 06, Malta. Tel: +356-21493251,

Fax: +356-21483231. MAURITIUS: J.M. Goupille & Co. Ltd., Rogers Industrial Park 1, Riche Terre, Mauritius, Tel: +230 206 9450 /

+230 207 1700, Fax: +230 206 9474/ +230 248 3188. MOROCCO: UATS 26 Rue Ennarjisse, Hay Erraihan, Beausejour - Hay

Hassani-Casablanca, Morocco. Tel: +212 522945114, Fax: +212 522942442. NEPAL: Universal Electrocom, Tripureshwor, Kathmandu,

Nepal. Tel:+977-1-4265191. NIGERIA: Dana Electronics Ltd. (Lagos) 116/ 120, Apapa Oshodi Express Way, Isolo, Lagos, Nigeria. Tel:

+234-17431818/ +234-8037767774/ +234-8057445477. (Abuja) 18, A.E. Ekukinam Street, Off Obsfemi Awolowo Road, Utako, Abuja,

Nigeria. Tel: +234-8032276101/ +234-8037767774. (Kano) 9A - Mai Malari Road, Bompai, Kano, Nigeria. Tel: +234-8053294947/

+234-8037767774. OMAN: Oman Marketing & Service Co. (Omasco), P.O. Box 2734, Behind Honda Showroom, Wattayah, Oman, Tel:

+968-24560232/ 24560255, Fax: +968-24560993. Oman Marketing & Service Co. (Omasco), Al Ohi, Sohar, Oman, Tel: +968-26846379,

Fax: +968-26846379. Oman Marketing & Service Co. (Omasco) - Sanaya, Salalah, Oman, Tel: 00968-23212290, Fax: +968-23210936.

PAKISTAN: Ammar Service & Spares - 60-Bank Arcade, Serai Road, Karachi, Pakistan, Tel: 0092-21-32426905, Fax: 0092-21-32427214.

PHILIPPINES: 476 J. P. Rizal St., cor Kakarong St. Brgy Olympia, Makati City, Tel: +632 403-5698. QATAR: Al Muftah Service Centre -

Al Wakrah Road, P.O. Box 875, Doha, Qatar. Tel: 00974-4650880/ 4650110/ 4446868, Fax: 00974-4441415/ 4662599. SAUDI ARABIA:

(Al Khobar) Al-Suwaiket Catering & Trading Co., P.O.Box 4228, King A.Aziz Street, Al Khobar, Tel: +966-3-8591088, Fax:

+966-3-8595648. Fawaz Ebrahim Al Zayani Trading Est. P.O. Box 76026, Al Khobar #31952, Tel: +966-3-8140914, Fax: +966-3-8140824.

(Jeddah) Banaja Trading Co. Ltd, P.O. Box 366, Jeddah-21411, Tel: +966-2-6511111, Fax: +966-2-6503668. (Riyadh) Banaja Trading Co.

Ltd, P.O. Box 566, Riyadh-11421, Tel: 00966-1-4124444, Fax: +966-1-4033378. SOUTH AFRICA: Trevco Power Tool Service 14

Steenbok Street, Koedoespoort, 0186, Pretoria, South Africa, Tel: +27-86-1873826, Fax: +27-86-5001771. SRI LANKA: Delmege

Construction Products (Pvt) Ltd., No 101 Vinayalankara Mawatha, Colombo-10, Sri Lanka, Tel: +94-11-2693361-7, Service hotline:

+94-77-2211111. TUNISIA: Société Tunisienne De Manutention - Rue de la Physique, Nouvelle Zone Industrielle de Ben Arous-2013

Tunisie, Tel: +216-71-386102/ 380620, Fax: +216-71380412 ext 216. UGANDA: Anisuma Investment and Services Ltd., J R complex,

Ware House No.5, Plot No 101, 3rd Street Industrial Area, Jinja Road, Kampala, Tel: +256-414237106. UAE: (Abu Dhabi)

Light House Electrical, P.O. Box 120, Abu Dhabi, Tel: +971-2-6726131, Fax: +971-2-6720667. (Al Ain) Zillion Equipment and Spare Parts

Trading LLC, P.O. Box 19740, Opp. Bin Sadal/Trimix Redymix Sanaiya, Al Ain. Tel: +971-3-7216690, Fax:+971-3-7216103 (Dubai)

Black & Decker (Overseas) GmbH, P.O. Box 5420, Dubai, Tel: +971-4-8127400/ 8127406, Fax: +971-4-2822765. (Musaffah) Light House

Electrical, P.O. Box 120, Abu Dhabi, Tel: +971-2-5548315, Fax: +971-2-5540461. (Sharjah) Mc Coy Middle East LLC, P.O. Box 25793,

Sharjah, Tel: +971-6-5395931, Fax: +971-6-5395932. (Ras Al Khaimah) Mc Coy Middle East LLC, P.O.Box 10584, Ras Al Khaimah, Tel:

+971-7-2277095, Fax: +971-7-2277096. YEMEN: (Aden) Muala St., Tel: +967 2 222670, Fax: +967 2 222670. (Sana'a) Middle East Trad.

Co. Ltd., P.O. Box 12363, Hayel Street, Sana'a. Tel: +967-1-204201, Fax: +967-1-204204. (Taiz) Middle East Trading Co. (METCO),

5th Flr. Hayel Saeed Anam Bldg, Al-Mugamma St. Taiz, Yemen, Tel: +967-4-213455, Fax: +967-4-219869.

N a m e s & A d d r e s s e s f o r B l a c k & D e c k e r S e r v i c e C o n c e s s i o n a r i e s

Page is loading ...

Black & Decker BDB530 User manual

Black & Decker BDB530 User manual

in other languages

Related papers

Other documents