Aiphone LEM-1DLC User manual

LEM-1DLC
Aiphone
Brand
Aiphone
Model
LEM-1DLC
Type
User manual

This manual is also suitable for

Aiphone LEM-1DLC is a master station for multiple master use, allowing for communication between multiple stations and a door. It features a door release contact and can trigger an external bell or sounder when the door station button is pressed. The device requires an individual PT-1210N power supply and separate power supplies for each master station. A normally open contact closure is provided for door release, and a normally closed contact can be achieved using an external relay like the RY-18L or RY-24L for magnetic locks.

Aiphone LEM-1DLC is a master station for multiple master use, allowing for communication between multiple stations and a door. It features a door release contact and can trigger an external bell or sounder when the door station button is pressed. The device requires an individual PT-1210N power supply and separate power supplies for each master station. A normally open contact closure is provided for door release, and a normally closed contact can be achieved using an external relay like the RY-18L or RY-24L for magnetic locks.

PT-1210NPT-1210N
-INSTRUCTIONS -
Multi-Master Access Sentry System
Master Station for Multiple Master Use, including Occupied Lamp
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
OPERATION NOTES:
1. Only one master can be used at a time.
2. When the answering master presses the TALK button, the red LED above the OFF switch will light on both masters.
This feature is controlled by the "R" wire between masters.
3. When the OCCUPIED light is illuminated, do not press the TALK button on the non-answering master, or a feedback
will be heard throughout the system. If this occurs, turn off one of the masters (depress OFF button). At that time,
communication between the door and the answering master can continue normally.
4. There is no communication between masters.
INSTALLATION GUIDELINES:
1. Separate power supplies (12-16V AC or 12-24V DC) are required at each master station.
DO NOT CONNECT +/- WIRES BETWEEN MASTERS. Keep wires for power and communication in separate jackets.
2. The door strike can be powered from one of these power sources (as shown) or from an independent source. Door
release contact rating on the LEM-1DLC is 24V DC, 1A max.
3. The EL-9S is designed for a standard wood framed door, and for light to medium usage. If a different type of door is
used, install a strike appropriate for that door.
4. The LEM-1DLC provides a "normally open" contact closure for door release.
5. If using a magnetic lock, either the RY-18L or RY-24L relay will be required to get a normally closed contact.
(See diagram on back)
LE-D
1
E
-
Door
Master #1 Master #2
EL-9S
Please read and understand all
instructions before installation.
IMPORTANT!!!
Each master REQUIRES
an individual PT-1210N power supply.
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
TOLL FREE FAX LINE:
(800) 832-3765
E-MAIL: [email protected]
1
E
R
+
-
EL
EL
LEM-1DLC
1
E
R
+
-
EL
EL
LEM-1DLC
NOTE:
1. Use a 12V DC power source, 500mA or greater, for the RY-AC. An Aiphone PS-1225UL can be used to power both
the relay and the one LEM-1DL/C. The second LEM-1DL/C must be powered separately.
2. The LEM-1DL/C that does not have the RY-AC connected may use the PT-1210N power supply.
PT-1210N
LE Series
Sub
1
E
-
RY-AC
+
-
12V DC
BELL
TO
EXTERNAL
POWER
WHITE
RED
BLACK
YELLOW
YELLOW
1
R
EL
EL
E
+
-
LEM-1DL/C
1
R
EL
EL
E
+
-
LEM-1DL/C
Power
Supply
To door strike
and power
External Signaling:
Trigger and external bell or sounder when the door station button is pressed.
SYSTEM CONFIGURATION:
LEM-1DL/C with Door Release contact activating a Normally Closed relay for Magnetic Lock
Note: For applications requiring a Normally Closed (N/C) contact (Magnetic locks, etc), an external relay should be chosen
based on the lock’s power source.
• When using a 12-18V DC magnetic lock, Aiphone’s RY-18L may be used.
• For 24V DC magnetic locks, Aiphone’s RY-24L relay may be used.
• A 3
rd
party relay of similar specifications may also be used. Refer to manufacture’s documentation for connection details.
LEM-1DLC Instr.
0107jdjs
MAGNETIC LOCK WIRING METHOD:
(Normally Closed contact)
Lock Power: Power source for Magnetic Lock
When using 12-18V DC, use the RY-18L.
When using 24-36V DC, use the RY-24L.
LE Series Sub
1
E
+
-
EL
EL
LEM-1DL/C
~
~
PT-1210N
1
E
-
Leave jumper
between E and -
attached
Red
Blk
Brn
Org
Yel
COM
N/C
Use Brown & Yellow wires
when connecting to Maglock.
LOCK
POWER
+
-
RY-18L / RY-24L
Magnetic Lock
  • Page 1 1
  • Page 2 2

Aiphone LEM-1DLC User manual

LEM-1DLC
Aiphone
Brand
Aiphone
Model
LEM-1DLC
Type
User manual
This manual is also suitable for

Aiphone LEM-1DLC is a master station for multiple master use, allowing for communication between multiple stations and a door. It features a door release contact and can trigger an external bell or sounder when the door station button is pressed. The device requires an individual PT-1210N power supply and separate power supplies for each master station. A normally open contact closure is provided for door release, and a normally closed contact can be achieved using an external relay like the RY-18L or RY-24L for magnetic locks.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers