FREE WEIGHT
BACK EXTENSION - G1FW162
MATRIX FITNESS SYSTEMS | 1600 LANDMARK DRIVE COT TAGE G ROVE W I 53 527 USA
Toll Free
866.693.4863
mat r i x f i t n e ss . co m Fa x
608.839.8687
PART # 0000000000
REV. 1.3
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals,
whether they are the end user or supervising personnel on proper usage of the equipment.
It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following
information prior to its use.
PROPER USAGE
Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that
MATRIX Fitness Systems equipment be used properly to avoid injury.
Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts
supplied by your country’s local MATRIX Fitness Systems dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important
information. If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or
tipping over. This must be performed by a licensed contractor.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment, as well
as keeping users liability to a minimum. Equipment needs to be inspected at regular intervals. Defective
components must be replaced immediatly. Improperly working equipment must be kept out of use until it is
repaired. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is
qualified to do so. Matrix Fitness will provide service and maintenance training at our corporate facility upon
request or in the field if proper arrangements are made.
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified
to do so. MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate
facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID
INJURY!
1. Never allow children on freeweight equipment. Teenagers must be supervised at all times while using
this equipment.
2. All warnings and instructions should be read and proper instruction obtained prior to use.
3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program.
4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts.
5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable.
6. This equipment should only be used in supervised areas where access and control are regulated by the owner.
PRODUCT SPECIFICATIONS
TECH SPECS
Overall dimensions (L x W x H) 128 x 74 x 86 cm / 50” x 29” x 34”
Product Weight 41 kg / 90 lbs
FW162_r1.3.indd 1 4/13/10 9:14 AM
Frame Detail
Step 1
Nylon Nut
ScrewZ01 4
Z06 Flat Washer
Z07
8
4
Item Description Qty
Z07
Z06
Z01
Z06
Z07
Z06
Z06
Z01
Z01
Z01
Z06
Z06
Z06
Z07
Z06
Z07
0mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160
Step 2
Adjustable Tube FrameAM1 1
Washer
Nylon Nut
Z06
Z07
2
2
Screw
Description
Z03
Item
2
Qty
Foot PlateB08 1
Z06
Z07
Z07
Z06
B08
Z03
Z03
AM1
Step 3
Flat WasherZ06 4
Nylon Nut
ScrewZ09
Z07
4
4
DescriptionItem Qty
Z08 Screw 1
Z09
Z08
Z09
Z09
Z09
Z06
Z07
Z06
Z07
Z06
Z07
Z07
Z06
Frame Detail
Step 1
Nylon Nut
ScrewZ01 4
Z06 Flat Washer
Z07
8
4
Item Description Qty
Z07
Z06
Z01
Z06
Z07
Z06
Z06
Z01
Z01
Z01
Z06
Z06
Z06
Z07
Z06
Z07
Step 4
Description
Fla
t w
asher
Screw
Z06
It em
Z02
8
Qty
8
Z06
Z02
Z06
Z02
Z02
Z06
Z06
Z02
Z06
Z02
Z06
Z02
Z06
Z02
Z06
Z02
G1FW162 BACK EXTENSION
UNPACKING G1FW162 Back Extension
Thank you for purchasing a Matrix Fitness product. This machine is an EN957-1 and EN957-4 complaint Class S product. Your Matrix G1FW162 Back Extension is inspected before it is pack-
aged. It is shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. Carefully
unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
CAUTION
The weight of the G1FW162 Back Extension is 90 lbs. (41 kg). To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame
pieces from this box. Please be sure to install the equipment on a stable base, properly level the machine and leave at least two feet of clearance to enter and exit the machine. Maximum user
weight for this machine is 350 lbs. (159 kg).
TOOLS REQUIRED FOR ASSEMBLY
13mm and 17mm Wrench
M6 L-shaped Allen Wrench
M8 L-shaped Allen Wrench
If any items are missing please contact your country’s local MATRIX dealer for assistance.
FW162_r1.3.indd 2 4/13/10 9:14 AM
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Matrix G1-FW151 Owner's manual
-
-
-
-
-
-
-
-
-
Other documents
-
Horizon Fitness OXFORD 5 Owner's manual
-
-
Johnson e7000 Owner's manual
-
-
Vision Fitness X20 Assembly Manual
-
-
Moog Videolarm DDW10CR Product Instructions
-
-
-