Miele HME3601 Owner's manual

Type
Owner's manual
Appliance Tower Configuration
Microwave, Single Oven & Warming Drawer
Brand: Miele
HD207080
IMPORTANT:
Dimensions for the shelf positions are to the centre of the stud fixing hole.
Re-positioning/drilling of new shelf stud positions may be required.
Shelf configurations are identical for standard height and tall options.
For tall options, a 180mm top box is fitted to the top of the tower
(upper door hinge position moves into the top box side panel)
Frontal height
390mm
Frontal height
356mm
Frontal height
570mm
Frontal height
356mm
Bottom back panel
(behind cupboard)
height 358mm
Bottom back panel
(behind cupboard)
height 400mm
59mm
347mm
27mm
347mm
1094mm*
1551mm*
Back support
panel
1094mm dimension
is to the top of the
bracket shelf
5mm
Note: Use metal brackets each
side (LAM0012), to support the
upper appliance
*Holes will need to be
drilled for upper shelf
and bracket positions
  • Page 1 1

Miele HME3601 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI